Foreign countries have seen mechanized operation of truck cranes everywhere. Italy is still the country with the largest number of truck cranes. Truck cranes are used for hoisting and transportation. They are used in stations, warehouses, docks, construction sites, and field rescue facilities. So under what circumstances does China also use the truck crane?
Many cities nowadays engage in landscaping construction, so they carry a lot of vegetation, and the vegetation is usually bulky and heavy cargoes. At this time, it is necessary to use cranes, which can both completely work and reduce the cost of the garden builders. . And it will not artificially destroy vegetation, so that it can increase its survival rate.
The development of international trade in our country is becoming more and more large, so that it breeds many ports. The goods on the port are also usually transported along with mechanical operations. After all, there are too many goods and the use of manual operation is not an ideal operation. At this time, it is necessary to send the truck crane. On the field, it can perfectly combine the artificial development and improve the operational efficiency of the company.
I remember that when I was young, I saw many people repairing street lights through the scaffolding to the top, and I was always afraid of whether maintenance personnel would fall. At that time, the use of truck cranes was not yet very comprehensive. One of the main reasons was the high cost of the purchase, which led to some villages not having the cost to buy, so that only scaffolding could be used. So now many city government departments will have some subsidies, which will make the use of vehicles more widely. The use of cranes for maintenance of street lights is a very good method, which not only guarantees the safety of maintenance personnel but also improves work efficiency.
In the construction industry, truck cranes are also widely used and can be used to carry bricks to carry cement, replacing some manual operations and reducing their working capacity. This is also a very humanized performance.
In fact, in daily life, it can also be applied to many places where the crane is attached. Xiaobian is here to list some common applications. It is believed that more and more truck cranes will be used instead of manual operations to relieve the pressure on workers.
Clips and Fasteners are most commonly categorized as flat or sheet material that is formed into simple or complicated shapes. Most often, Clips and Fasteners are manufactured using both low and high carbon steels, depending on the application. In some applications, high carbon spring steels are utilized where a spring force is required that cannot be obtained with normal spring forces. When high carbon spring steels are used for manufacturing, it is a standard requirement that the product is heat treated and quenched to a hardness level that allows the product to flex without deforming. Heat treating and oil quenching are commonly used for the hardening process, but an Austemper heat treating process is typically the best practice for eliminating heat treat deformation.
Steels most commonly used in our process for manufacturing Clips and Fasteners are either low carbon, cold rolled steel (without heat treatment), and high carbon spring steels ranging from Grade 1050 to 1095, along with Stainless Steels and precious metals such as Brass, Phosphor Bronze, and Beryllium Copper. Clips and Fasteners that we manufacture typically range in material thickness of .010″ up to .080″, with many of our prototype and short run orders ranging from these sizes. We also have the capability of manufacturing designs in a wide range of shapes and sizes. We can supply Clips and Fasteners with a variety of special finishes or coatings to your specification along with various heat treating requirements.
Clip Materials
|
Material |
Grade |
Specification |
|
High Carbon Spring Steel Strip |
1050 |
ASTM A682 (AISI 1050) |
|
|
1065 |
ASTM A682 (AISI 1060) |
|
|
1070 |
ASTM A682 (AISI 1070) |
|
|
1074 |
ASTM A682 (AISI 1074) |
|
Stainless Steel Strip |
301 |
ASTM A666 |
|
|
302 |
ASTM A666 |
|
|
316 |
ASTM A582 (AISI 316) |
|
|
17-7 PH |
ASTM A693 (631) (AMS 5529) |
|
Non-Ferrous Alloy Wire |
Phosphor Bronze |
ASTM B103 |
|
|
Beryllium Copper |
ASTM B194 |
|
High Temperature Alloy Wire |
Inconel 600 |
ASTM B168 (AMS 5540) |
|
|
Inconel x750 |
AMS 5542 |
|
Low Carbon Steel |
Cold Rolled Steel (CRS) |
ASTM A1008 (AISI 1008/1010) |
Spring Steel Clip,Stainless Steel Clip,Spring Clip,Stainless Clips
Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , https://www.sheetmetals.nl