Medical waste transfer vehicles have many names, such as medical garbage collection vehicles, medical garbage transport vehicles, and so on. The thickness of the insulation compartment of a medical waste transfer vehicle is generally 6 mm. The outer skin of the insulation compartment is a glass steel plate, while the inner skin is a stainless steel plate. The insulation layer is a rigid polyurethane foam. The exterior decoration protection plate of the medical waste transfer vehicle is the newly-arranged exterior decoration protection plate for the refrigerating and warming vehicle.
Medical waste transfer vehicle performance characteristics:
1. The main use performance of medical waste transfer vehicles is based on the characteristics of daily medical waste transportation. The tanks of vehicles are all hermetically sealed. The back of the vehicle compartment is a double-layered closed structure with an internal Open the door with two doors and double back door. There is a special spring on the door to open the door, which can facilitate your opening up and down. In order to be able to well ensure the separation of medical waste and external environment contained in the medical waste transfer car body, it can also be very convenient for the loading and unloading of medical waste.
2. The medical waste transfer vehicle is divided into a medical article storage compartment and a cargo storage compartment. There is a single-sided door on the outside of the medical article storage compartment. This is in the direction of the first officer. This design method is In order to facilitate the storage of medical equipment and medical supplies, medical waste and staff safety can be well ensured.
3. Warning signs for medical waste are designed on both sides of the trunk of the medical waste transfer vehicle. On both sides of the doors in the driver's cab and the co-cab, there are spray-painted medical home-delivery agencies.
4. There is a refrigeration unit with equivalent power installed in the medical waste transfer vehicle . During the process of transporting the goods, the temperature in the box where the goods loaded by the refrigeration unit can be controlled is within the scope of use of the temperature in the specified requirements. For inhibiting the proliferation of bacteria in cargo containers.
5. The siding of the vehicle body is made of stainless steel, and has good acid and alkali resistance. It can be used to disinfect vehicles with corrosive disinfectant, and the arc-shaped stainless steel is installed around the compartment. As well as the corners, there is no dead angle when cleaning and disinfecting.
6, the vehicle's roof top of the inner surface of the board is equipped with a UV germicidal lamp installed, UV germicidal lamp in the normal use of the work of radiation a lot of 253.7nm UV, for those microorganisms have a strong lethality, and can be in half Hours to 45 minutes, all sterilization.
7. The medical waste transfer vehicle has a drainage hole between the inner floor and the inner panel of the carriage, and a sewage pipe made of stainless steel is installed, which is very convenient for the vehicle's disinfectant to pass through.
8. The lower end of the sewage pipe in the box of the vehicle is also made of stainless steel, and has a thermal waste collector that can store and collect the waste liquid in 3-2k. The stainless steel ball valve and connecting pipe are installed below the collector to ensure that the waste liquid does not leak and the discharge can be slowed down. (Text / Sun Ni)
Color Acrylic Sheets,Crystal Pmma Sheets,Clear Acrylic Crystal,Plexiglass Acrylic Plastic Sheet
Yixing Guanyu New Materials Co.,Ltd , https://www.plasticsheetsupply.com