How to buy second-hand forklift

Consumers buying second-hand forklifts are nothing more than cost-savings. However, as the forklift's use time increases, its own value is decreasing. Nowadays, there are many types of models on the market. The brands are rich in prices. What kind of cars have a high degree of preservation and high residual value? According to the analysis of professionals, the main factors affecting the old car salvage value are summarized as follows.

First, the identity of the vehicle's identity "carriage" of the car itself has a greater impact on the residual value of the vehicle, taxis, rental cars compared to official cars, private cars are in poor condition, the same time, more mileage, scrap time is short, so itself The residual value is basically half that of other types of vehicles. In general, vehicles with a high residual value are private cars and large-unit vehicles.

Second, the vehicle's brand share As with other products, high visibility and market share will greatly increase its value. In China's old car trade, the value of Heli forklifts, Hangzhou forklifts, and Japanese brand vehicles is higher than that of other brands in other places of origin, and the level of recognition by the people is higher.

Third, the vehicle's own quality and technical vehicle as a comprehensive use of the product, for safety, maneuverability, comfort, technical, environmental protection and energy conservation are higher requirements. If the quality of the vehicle itself is low and the technology is poor, the condition of the vehicle will be very poor after three to five years of use. Therefore, the “bargains” made by some small manufacturers tend to have a low degree of preservation, and the depreciation of vehicles is serious.

Fourth, the use of the car's own status The status of the vehicle is one of the most important determinants of the residual value of the vehicle, the same use of the time of the vehicle according to different vehicle performance, the price must be a lot of difference. If the vehicle's critical frame, chassis, and engine have relatively large traces of repairs and accidents, the residual value of the vehicle itself will be greatly reduced. In contrast, the “residual loss” caused by other vehicle damage is much smaller. For example, the taillights are not bright, the tires are worn, etc. Most of them have little effect on the residual value of vehicles.

Fifth, the cost of vehicle maintenance and use of wise consumers can still raise the car after buying a car, the daily maintenance costs of the vehicle have a great impact on the vehicle's residual value. Therefore, some consumers mostly choose Heli and Hangzhou forklifts to use more! Some large manufacturers have many service points in Shanghai, good repair quality, cheap parts and components, low daily maintenance costs, and low fuel consumption. These few items can save consumers thousands of dollars per year for the necessary expenses. The economic benefits of these vehicles will inevitably attract more old vehicles to purchase users, so the ease of use and maintenance of vehicles will also affect the vehicle's own residual value. Some imported vehicles and domestic small-sized vehicles often cause human residual value because of low spare parts and high maintenance costs.

Select second-hand forklifts to purchase second-hand forklifts in order to save investment costs and produce good economic benefits as quickly as possible. However, if you do not pick a good forklift, then you may have bought a medicine jar, which will cause delays in production and maintenance. Is it correct? Very annoying? Below, I briefly introduce what should be paid attention to the selection of second-hand forklifts?

Look first: how to look? Look there? To stand in front of you and see if the clearances above and below the gantry are the same, as shown above and below, to prove that the forklift has been working over a long period of time due to overload, or there have been accidents. Under the armpit, see if the steering system below the front is consistent with the introduction. Turn to sub-machinery and hydraulics. The hydraulic pressure is also divided into full hydraulic and mechanical hydraulic pressure. Full hydraulic pressure, which is commonly known as the horizontal straight cylinder, the mechanical triple board. Maybe different places are named differently, but concrete meaning can be understood by everyone. See if all the gaps in the connection are large. If it is large, it proves that the car has a high usage rate. After the purchase, it will probably increase the maintenance cost.

Listen: When you start the car and hear the sound of the engine, if there is a clear click and the engine is running smoothly, add a few long throttles and let go of the throttle to see if the engine's response is sensitive and flawed. You should know how to Did, try: no-load test, load full, see the performance of the vehicle, if you can reach more than 85% of new cars, should be considered good, do not rely on those overloaded test, the general problem of the big throttle test is not easy to find, No load, the load must be small throttle and medium oil, full load parking, flameout, watch the goods on the gantry sink, the time to be about 5 minutes. The above only personal experience for reference.