Winter is approaching, but in the winter, people are most concerned about snow days. Because snow is more slippery, cars are more prone to skidding, which poses a threat to our traffic safety. So how to avoid the car from sliding when driving in winter?
1, to ensure the normal performance of the vehicle braking system, so as to ensure that the front and rear wheels in the braking can produce a uniform braking force at the same time, to avoid the rear wheel locking before the front wheel or due to uneven four-wheel force resulting in normal body displacement Direction of travel.
2. When driving on rain or snow, the vehicle is best kept at a constant speed. Also, when stepping on and releasing the accelerator pedal, it should be smooth. Do not suddenly step on the throttle to accelerate or abruptly lift the throttle to decelerate. When the car accelerates, it will quickly reduce the throttle when it accelerates, and vice versa.
3, learn to accurately control the speed, for some vehicles without ABS in the event of an emergency to use intermittent braking method. That is, when the brake pedal is first depressed violently and reaches one-half to three-quarters of the pedal stroke, one-fourth of the stroke is retracted. This method is used to rapidly step down and loosen the brake pedal several times. Make the vehicle slow down and stop. The essence of this approach is to imitate the form of ABS work, not only to lock the wheel, but also to achieve the purpose of rapid reduction of the speed, but also can guarantee that the drive wheel is not locked and cause the direction out of control.
4, if the vehicle has a side slip, you must keep calm, if the brake caused by the brake should be immediately stopped, if the vehicle slide to the left when the steering wheel to the left, and vice versa, but the action can not be too large, otherwise Will slide in the opposite direction. During this period, it is best not to use the handbrake brake, because most of the vehicle's handbrake is brake the rear wheel, more prone to sideways or rollover accidents.
5, when driving, if you encounter a small angle turn or ice conditions on the road, using a sudden brake may cause the car to skid. In particular, drivers in the North often experience tire slippage in the winter. If a tire slip occurs, it should immediately move the steering wheel in the direction of the rear wheel. This can effectively reduce the rear wheel slip and re-control the direction of the car. In this process, you can't step on the brakes, or even add a little oil, so that the center of the car moves backwards, allowing the rear wheels to gain more grip, and then quickly correct the slippage. The speed and breadth of the steering wheel should also be moderate, to avoid the new round of danger caused by the return wheel.
High Speed Steel Saw Blade(HSS)
The saw blade of our company is equipped with numerical control equipment of CBN grinding wheel, and the surface roughness is extremely low, which can ensure the complete cleaning of chips and prevent waste residue from adhering to the gap between the saw teeth. Chittak is the general agent of many saw blades, such as yonnex, yukon, high-end Chinese brands. The company promises to purchase saw blades to provide tooth-opening services.
Blade diameter: 250-620mm
Centre bore:32/40/50/80/90/140
Hub: 90/100/120/130/140/200/225
HSS blade can be applied to the pipe Metal Laser Cutting Machine,Automatic Steel Pipe Cutting Machine,Blade Cutting Machine and Manual Saw Pipe Cutting Machine etc.
Hss Saw Blade,Hss Circular Saw Blade,Hss Circular Saw Blade For Metal,High Speed Saw Blade
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctkcutting.com