Automotive lubricants are used at a very high frequency during maintenance. In addition to protecting the engine and reducing the number of oil changes, high-quality lubricants can also save on gasoline expenses. In this season, at the same time, we must also be careful not to cause automobile breakdowns due to improper use of lubricants. The “improper†use method is generally based on the four “misunderstandings†of lubricants by riders.
Misconception 1: Lubricants can be added more
The amount of lubricant should be controlled between the upper and lower tick marks of the oil dipstick. Because too much lubricating oil will enter the combustion chamber from the gap between the cylinder and the piston to form a coke combustion. These coke deposits will increase the engine compression ratio and increase the tendency to produce knocking. Coking in a red hot state in the cylinder will also cause premature combustion. If it falls into the cylinder, it will increase the wear of the cylinder and the piston, and it will also accelerate the pollution of the lubricant. Secondly, too much lubricating oil increases the stirring resistance of the crankshaft connecting rod, which increases the fuel consumption.
Misunderstanding 2: When the lubricating oil turns black, it is time to change the oil.
This understanding is not comprehensive. For lubricating oils that do not add a clear dispersant, the color blackening is indeed a sign that the oil has been seriously deteriorated, but the lubricants used in Hyundai Motors are generally added with a decomposing agent. This clearing agent cleans the film and black coke adhering to the piston and disperses it in the oil to reduce the formation of high-temperature deposits in the engine. Therefore, after the oil is used for a period of time, the color tends to turn black, but this time The oil has not completely deteriorated.
Misunderstanding 3: Lubricants often add no change
Regular inspection of lubricants is correct, but supplementation without replacement can only compensate for the lack of oil, but it cannot fully compensate for the loss of lubricant performance. During the use of lubricating oil, the quality of the lubricating oil will gradually decrease due to pollution, oxidation, etc. At the same time, there will be some consumption and the quantity will decrease.
Misunderstanding 4: Large use of additives
A truly high-quality lubricant is a finished product with a variety of engine protection functions. Formulations already contain a variety of additives, including anti-wear agents, and lubricants are the most balanced formulas to ensure full performance of all kinds of performance. Adding other additives by themselves not only does not bring extra protection to the vehicle, but reacts easily with the chemical substances in the engine oil.
Sandwich Panel Roll Forming Machine
Special Roofing Sheet Roll Forming Machine is for some speical kinds of roofing sheet machines, for example Sandwich Panel Roll Forming Machine, Long Span Roll Forming Machine Manufacturer. For Sandwich Panel Roll Forming Machine could make sandwich panel for keeping warm and others.Our company have rock wool sandwich panel production line,sandwich panel production line for self. For Long Span Roll Forming Machine, it could be used for big factory building. And there are some types like ridge cap roll forming and others.
Sandwich Panel Machine,PU Foam Sandwich Panel Machine,Rock Wool Sandwich Panel Machine,Rock Wool Sandwich Panel Production Line,Sandwich Panel Production Line
Zhongtuo Roll Forming Machinery Co., ltd , https://www.frameforming.nl