(1) JAC 10ton truck mounted crane technicial data and overall photos
| Technical parameter of chassis | |||
| Chassis Model | HFC1251 | Dimension(LxWxH) | 10645x2520x3330mm |
| Cargo dimension(LxWxH) | 7500x2294x550mm | Driving type | 6x4 |
| Front suspension | 1495mm | Rear suspension | 1800mm |
| Front tread | 2040mm | Rear tread | 1860mm |
| Quality parameters | GVWÂ | kg | 25,000 |
| Chassis weight | kg | 9,700 | |
| Front/rear axle loading | kg | 4789/4911*2 | |
| Rated loading | kg | 15,300 | |
| Performace paremeters | Max speed | km/h | 87 |
| Max gradeability | % | 43 | |
| Radius of turning | m | 11 | |
| Cabin | Type | N944 high cabin |  |
| Seat | Air seat | Â | |
| Shroud | / | Â | |
| AC | Standard, have | Â | |
| Heater | Standard, have | Â | |
| Electronic glass | Standard, have | Â | |
| CD | / | Â | |
| MP3 | Standard, have | Â | |
| Cabin suspension | 2 springs in front and 2 air bags in rear | ||
| Electronic control flip | / | Â | |
| Copilot visor | Standard, have | Â | |
| Engine | Model | WD615.44 | |
| Type | WEICHAII Brand, 6 cylinder , direct injection, turbocharged | ||
| Max output power | 330/2200 (Hp/rpm) | Â | |
| Max torque | 1250/1400-1600 (N.m/rpm) | Â | |
| Displacement | 9726 cc | Â | |
| Fuel type | Diesel oil | Â | |
| Emission standard | Euro 2 | Â | |
| Clutch | Model | Single, dry plate, diaphragm spring | Â |
| Specification | ∅430 |  | |
| Transmission | Model | Fast 9JST150T-B | Â |
| Gear position | normal | Â | |
| Gear ratio | 12.65/1.00 | Â | |
| PTO | Optional QH50 | Â | |
| Front axle | Model | "I" style brake face | Â |
| Max capacity | 6,500 kg | Â | |
| Rear axle | Model | Steyr technology | Â |
| Ratio | 4.8 | Â | |
| Max capacity | 13,000 kg | Â | |
| Drive shaft | Specification | ∅110x6 |  |
| Steering | Type | Power steering with ZF/Domesyic steering gear | |
| Oil Tank | Type | Iron material, 400L | Â |
| Brake | Type | Dual-circuit air brake | Â |
| ABS | Standard, have | Â | |
| Tire | Model | 12R22.5 16PR | Â |
| Suspension | Front axle stabilizer bar | Parpolic leaf spring 10/12 | Â |
| Electronic system | Batteries | 12 volt-140Ahx2 | Â |
| Alternator | 28 volt/70 amp | Â | |
| Starter | 24 volt/ 7.5KW | Â | |
| Other configuration | With 4kg fire extinguisher , with side fender, with warning lights | Â | |
| Color and printing | Can according to customer's requests | ||
| Technical parameter of crane(10T straight arm) | |||
| CRANE Model | SQ10SK3Q | Max Lifting Capacity(kg) | 10,000 |
| Max Lifting Height(m) | 14 | Max working radius(m) | 12 |
| Max Lifting Moment(T.M) | 25 | Recommend Powe(kw) | 30 |
| Max Oil Flow of Hydraulic System(L/min) | 63 | Max Pressure of Hydraulic System(MPa) | 26 |
| Oil Tank Capacit(L) | 160 | Rotation Angle | all Rotation |
| Crane Weight(kg) | 3800 | Installation Space(mm) | 1150 |
Â
Â
Â
Â
Hubei veldlion machinery co., ltd ,which is appointed by the ministry of industry and information technology of china, is a big manufacturer producing all kinds of special trucks.It has solid technology,flawless inspection,advanced equipments,reliant quality and flexible modes of operation.What's more, it has roundly passed the certificaton of iso 9001-2008 and the 3c certification(china compulsory certification) and other certifications that export needed.
Our company can design and produce many kinds of special trucks accurately as your request.Also own independent export right, wit a mount of clients overseas, such as the u.N., sudan, nigeria, north america, west africa, congo, vietnam ghana, kazakhstan etc.We strives for the survival by the quality and credit standing is the guarantee of our success.
(1) More than 500 workers, large and advanced production;
(2) 25 professional engineers, can offer the best and cheapest design;
(3) Build strict QC team to guarantee the quality;
(4) 1 year or 30,000km warranty which comes first.
(5) One set of spare parts of chassis provided which will help you save money on maintenance.
(6) Provide technical support and after serive for life.
(7) Professional sales team which will help you to choose suitable truck.
Why choose us?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has solid technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,iveco,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 3000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
Our services
1.We can send our technician to arrive the customer's country to provide the service and also we can train customer's workers for free.
Â
If you need 3ton,5ton,6ton,8ton, 10ton, 12ton,14 ton,16 ton truck with crane ,welcome to let me know.
(1) JAC 10ton truck mounted crane technicial data and overall photos
| Technical parameter of chassis | |||
| Chassis Model | HFC1251 | Dimension(LxWxH) | 10645x2520x3330mm |
| Cargo dimension(LxWxH) | 7500x2294x550mm | Driving type | 6x4 |
| Front suspension | 1495mm | Rear suspension | 1800mm |
| Front tread | 2040mm | Rear tread | 1860mm |
| Quality parameters | GVWÂ | kg | 25,000 |
| Chassis weight | kg | 9,700 | |
| Front/rear axle loading | kg | 4789/4911*2 | |
| Rated loading | kg | 15,300 | |
| Performace paremeters | Max speed | km/h | 87 |
| Max gradeability | % | 43 | |
| Radius of turning | m | 11 | |
| Cabin | Type | N944 high cabin |  |
| Seat | Air seat | Â | |
| Shroud | / | Â | |
| AC | Standard, have | Â | |
| Heater | Standard, have | Â | |
| Electronic glass | Standard, have | Â | |
| CD | / | Â | |
| MP3 | Standard, have | Â | |
| Cabin suspension | 2 springs in front and 2 air bags in rear | ||
| Electronic control flip | / | Â | |
| Copilot visor | Standard, have | Â | |
| Engine | Model | WD615.44 | |
| Type | WEICHAII Brand, 6 cylinder , direct injection, turbocharged | ||
| Max output power | 330/2200 (Hp/rpm) | Â | |
| Max torque | 1250/1400-1600 (N.m/rpm) | Â | |
| Displacement | 9726 cc | Â | |
| Fuel type | Diesel oil | Â | |
| Emission standard | Euro 2 | Â | |
| Clutch | Model | Single, dry plate, diaphragm spring | Â |
| Specification | ∅430 |  | |
| Transmission | Model | Fast 9JST150T-B | Â |
| Gear position | normal | Â | |
| Gear ratio | 12.65/1.00 | Â | |
| PTO | Optional QH50 | Â | |
| Front axle | Model | "I" style brake face | Â |
| Max capacity | 6,500 kg | Â | |
| Rear axle | Model | Steyr technology | Â |
| Ratio | 4.8 | Â | |
| Max capacity | 13,000 kg | Â | |
| Drive shaft | Specification | ∅110x6 |  |
| Steering | Type | Power steering with ZF/Domesyic steering gear | |
| Oil Tank | Type | Iron material, 400L | Â |
| Brake | Type | Dual-circuit air brake | Â |
| ABS | Standard, have | Â | |
| Tire | Model | 12R22.5 16PR | Â |
| Suspension | Front axle stabilizer bar | Parpolic leaf spring 10/12 | Â |
| Electronic system | Batteries | 12 volt-140Ahx2 | Â |
| Alternator | 28 volt/70 amp | Â | |
| Starter | 24 volt/ 7.5KW | Â | |
| Other configuration | With 4kg fire extinguisher , with side fender, with warning lights | Â | |
| Color and printing | Can according to customer's requests | ||
| Technical parameter of crane(10T straight arm) | |||
| CRANE Model | SQ10SK3Q | Max Lifting Capacity(kg) | 10,000 |
| Max Lifting Height(m) | 14 | Max working radius(m) | 12 |
| Max Lifting Moment(T.M) | 25 | Recommend Powe(kw) | 30 |
| Max Oil Flow of Hydraulic System(L/min) | 63 | Max Pressure of Hydraulic System(MPa) | 26 |
| Oil Tank Capacit(L) | 160 | Rotation Angle | all Rotation |
| Crane Weight(kg) | 3800 | Installation Space(mm) | 1150 |
Â
Â
Â
Â
Hubei veldlion machinery co., ltd ,which is appointed by the ministry of industry and information technology of china, is a big manufacturer producing all kinds of special trucks.It has solid technology,flawless inspection,advanced equipments,reliant quality and flexible modes of operation.What's more, it has roundly passed the certificaton of iso 9001-2008 and the 3c certification(china compulsory certification) and other certifications that export needed.
Our company can design and produce many kinds of special trucks accurately as your request.Also own independent export right, wit a mount of clients overseas, such as the u.N., sudan, nigeria, north america, west africa, congo, vietnam ghana, kazakhstan etc.We strives for the survival by the quality and credit standing is the guarantee of our success.
(1) More than 500 workers, large and advanced production;
(2) 25 professional engineers, can offer the best and cheapest design;
(3) Build strict QC team to guarantee the quality;
(4) 1 year or 30,000km warranty which comes first.
(5) One set of spare parts of chassis provided which will help you save money on maintenance.
(6) Provide technical support and after serive for life.
(7) Professional sales team which will help you to choose suitable truck.
Why choose us?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has solid technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,iveco,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 3000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
Our services
1.We can send our technician to arrive the customer's country to provide the service and also we can train customer's workers for free.
Â
If you need 3ton,5ton,6ton,8ton, 10ton, 12ton,14 ton,16 ton truck with crane ,welcome to let me know.
Generally speaking, a vertical injection molding machine can be used for injection molding of small-sized auto parts, so we must first know our injection requirements while choosing the machine we need. For example, you can choose a vertical injection molding machine for auto parts such as auto connectors, auto hardware fittings, auto electronic dogs, decorations, key shells, instrument panels, door buckles, etc.
Auto Part Machine,car parts making machine,Auto Parts Making Machine,Iniectio Auro Apparatus,Automotive Parts Injection Molding
Changzhou Yuehai Zanyang Machinery Sales Co., Ltd. , https://www.canyangmachine.com