The poor visibility of rainy days and the increase in braking distance are the causes of many accidents in the rain. The first thing to do before the arrival of the rainy season is the inspection and maintenance of the rainy day driving essentials wipers.
Teach you the daily maintenance and maintenance of the wiper. If the vehicle is exposed to the sun in open air for a long time, it will accelerate the aging of the wiper. At this time, the ability of the wiper to wipe off the water will drop. The water marks left on the front windshield will be Lights produce a variety of reflected light, affecting the eyes of drivers in rainy days, endangering traffic safety. To this end, teach you a few tips for self-care:
Clean regularly. In addition to washing the glass window every time the car wash, it is best to allow the car wash shop clerk to wipe the wiper strip with a glass cleaning solution, usually can also use their own cotton wipes with alcohol cleaner gently wipe the dirt on the scraper, but the scraper can not Wash and soak with gasoline, otherwise the blade will deform and affect its normal operation.
Use water sandpaper. When the wiper blade shows bad wiper, try the following method to see if it can rejuvenate it: separate the wiper blade from the windshield, soak the wiper blade with water, and use the 800 water-sandpaper to remove the rain. Scraping scraper back and forth 4-5 times, then rinse with clean water and put it back into the windshield. The principle of this method is mainly to use water sandpaper to flatten the small deformation of the wiper blade due to the change of dust and cold temperature.
Avoid drying dry. The first prerequisite for the use of wipers is, of course, to use them in the presence of rain, and never dry them. Otherwise, it will cause damage to the wiper blade and the wiper motor. Do it yourself. Check the wiper effect. The method of checking the wiper is very simple. Spray some cleaning fluid, start the wiper, and pay attention to whether it moves smoothly or not. Whether or not there is a loud sound, if any, means that the wiper is over pressure on the glass and proper adjustment must be made. After the squeegee has been wiped one or two times to see if there is moisture left on the windshield, look for scratches. If there are obvious scratches, it means the wiper glue on the wiper. Bars have been aged and need to be cleaned and polished. When they are severely damaged, they need to be replaced in time to avoid affecting driving safety.
How to choose a high quality wiper?
There are many kinds of wiper blades on the market. How to choose the right wiper for your car should pay attention to the following three points: 1. Check if the size of the wiper blade matches your model; 2. Whether the material of the wiper reaches The requirements; 3, check the state of the wiper: there is no swing is not smooth, wiper does not normally beat, the rubber contact surface and the glass surface can not completely fit and produce the phenomenon of wiping residue. If you are not sure, it is recommended that you still use the original wiper blade, after all, special car, and the windshield of the corresponding model completely match, will not cause additional damage to the glass.
Heat Meters are one kind of meters measuring the heat
consumption. In order to save the energy and decrease the environment
pollution, the heat meters are more and more popular for the modern buildings.
Heat meters can realize centralized heating supply. Now with the rapid
technology development, the heat meters also experience a fast way of growing
up. Now the government of the world starts to pay much attention to the
building remolding and new buildings heat meter installation. As the new type
of energy calculation, the heat meters have the advantages of higher accuracy,
energy saving and easy installation.
From the functions of the different types of heat meters, there are mechanical
heat meters, Digital Heat Meter,Ultrasonic Heat Meters, M-bus Heat Meters and also wireless heat
meters. Our company, Berggruen Technology Co.,Ltd never stops the steps for
further higher technology research and development. We are devoted to study the
new technology in the world to make better quality heat meters.
Heat Meters
Heat Meters,Mechanical Heat Meters,Ultrasonic Heat Meters,M-Bus Heat Meter,Digital Heat Meter
Berggruen Technology Co.,Ltd , http://www.meter-technology.com