- Model NO.: WEW-2000B
- Accuracy Grade: 1
- Control: Manual Control
- Power Source: AC380V
- Column Number: 4
- Transport Package: Wooden Case
- HS Code: 9024101000
- Maxcapacity: 2000kn
- Display: Computer
- Weight: 4500
- Oil Cylinder Position: Under
- Lead Screw Number: 2
- Origin: Zhejiang
This series universal testing machine UTM designed of PC display and manual drive hydraulic loading system, main engine controller separately fixed. It has the characteristics of operation amenity, working steady, high accuracy and loading steady. It is used to stretch, compress, curve and cut metal cement, concrete, plastics and so on.
2. Function
It is cylinder underneath type with double testing spaces structure. It can do many kinds of test, like tensile, bending, compression, shearing, and so on.
3. Structure
The main engine consist of an adjustable support (base, screw thread pole, moveable crossbeam (lower clamp set)) and a working frame (working oil tank, piston, platform, support crossbeam (upper clamp set)). Element of the machine: High-pressure oil pump supply oil to the working oil tank, the piston moves and press board and upper crossbeam to do stretch and press test. The stretch test is done in the space between upper crossbeam and movable crossbeam. The life motor, gear, chain drive rotate at a same speed to move the crossbeam.
4. Software
(1) The secrete two-grade authorization managemant
(2) Motion display load, position, tensile at the same time
(3) Load, position, tensile peak value display during the test and after
(4) Motion display load, position, tensile when testing
(5) Motion X-Y curve and user curse: Pressure-tensile, load-position, pressure-position, load-tensile, load-time, position-time, and so on.
(6) Automatically save the sensor information in doc
(7) Automatically save the test result for statistical calculation and output to data sheet and data base program, like ACCESS and EXCEL.
(8) Single page printing for the test report, including X-Y curve.
(9) Select from the analysis of predefined: Load peak value, pressure peak value, tensile strength, RP0.2, Rt0.5, ReL, value of extending to fracture value (manual and automatic), and so on
(10) Detail instruction, save and inquiry test setting to min. Error and save the time
(11) Units: N, kgf, lb, mm, in, or others
(12) Calibrating: Adjust the hardware like measuring cell by software
(13) Grip device: People can change the common movable jaw to fit the different width when doing the tensile test. Same for bending and compression test device.
| Model & specification | WEW-2000B |
| Max. test force (KN) | 2000 |
| Measuring range (KN) | 4%-100% F.S. |
| Relative error to force value (%) | ±1 |
| Distance between compression surfaces (mm) | 0-1000 |
| Max. distance between tensile jaw (mm) | 0-1000 |
| Bending test pressed rolling distance (mm) | 60-750 |
| Clip diameter of round sample (mm) | 20-70 |
| Clip thickness of flat sample (mm) | 0-40 |
| Width of flat plate specimen (mm) | ≤110 |
| Size of shearing specimen (mm) | 0-30 |
| Effective distance between the pillars (mm) | 700 |
| Piston stroke (mm) | 250 |
| Motor power (kW) | 2.2+0.55 |
| Main frame outline dimension (mm) | 1100×760×2700 |
| Oil source control cabinet outline dimension (mm) | 1080×650×1200 |
| Weight (about) (Kg) | 4500 |
Â
So what is laser engraving? The term [laser" is an acronym for Light Amplification by Stimulated Emission of Radiation. Basically a beam of light is reflected through a series of mirrors, that points the beam downward through a focus lens which is designed to concentrate the light into heat at an exact point. That point where the laser touches the surface is called the [focal point" and is where the heat is most intense. This focal point is less than a millimeter in size, however the diffraction of heat upon contact with the surface usually equates to roughly 1/200" in actual cutting accuracy. We produce cnc router machines for many years. How does laser engraving drifter from traditional printing? When you print something traditionally you add ink to paper. This is the opposite. We use the laser to remove material and what is normally [printed" will be cut away from your card with visible depth and texture. By varying the intensity of the beam, we can engrave at different depths, or even cut all the way through the material for a unique edge or die cut look. Another great thing about this process is that it does not involve any bits, blades, ink, or other components that need to be replaced, which allows us to ensure that each and every card is consistent in it`s look and end quality. We also offer full color UV printing which can also be done with laser engraving for a unique pairing.
Laser Engraver,Cnc Laser Engraver,Laser Cutter Engraver,Metal Laser Engraver,laser engraving machine,cnc laser machine
JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncxuanlin.com