MAFAL produce 130t truck with crane in Afirica
Feature:
1. Highlighted Advantages Show
   Innovative boom system with built-in sliding pad, plug-in boom head with patented technology and octagonal-shaped boom cross section provides excellent lifting capacity, safe and reliable lifting operations.
   Exclusive telescoping technology prevents occurrence of core tube bending, oil cylinder bending and boom breaking caused by mis-operation, and therefore operation safety is improved.
   The moment limiter equipped with color LCD realizes intelligent trouble diagnostic, and its precision leads in the same-class products in the industry.
   The ergonomic design cabs for the operator is spacious enough for flexible and convenient operations.
Specification:
Â
Dimension | Unit | QY130K-I |
Overall length, width, height | mm | 15600×3000×3850 |
Wheel base | mm | 1420+2420+1800+1420+1505 |
Weight | Â | Â |
Total weight in travel | kg | 54900 58000 |
Axle load | Â | Â |
Axle 1 | kg | 7500 7500 |
Axle 2 | kg | 7500 7500 |
Axle 3 | kg | 8300 10000 |
Axle 4 | kg | 12000 12500 |
Axle 5 | kg | 12000 12500 |
Axle 6 | kg | 7600 8000 |
Power | Â | Â |
Engine rated power | kW/(r/min) | 360/1800 (306/1900) |
Engine rated torque | N.m/(r/min) | 2200/1300 (2010/1200) |
Engine rated speed | r/min | 1800 (1900) |
Min. ground clearance | mm | 310 |
Travel | Â | Â |
Approach angle | ° | 20 |
Departure angle | ° | 14 |
Braking distance (at 30km/h) | m | ≤10 |
Max. grade ability | % | 40 |
Min. turning diameter | m | 24 |
Fuel consumption for 100km | L | 70 |
Main performance | ||
Max. rated total lifting capacity | m | 130 |
Min. rated working radius | Â | 3 |
Turning radius at turntable tail | Â | Â |
Counterweight | mm | 4200 |
Aux. winch | mm | 4590 |
Max. lifting torque | Â | 3450 |
Base boom | kN.m | 3450(4m×88t) |
Fully extended boom | kN.m | 1950(24m×7.1t) |
Fully extended boom+ jib | kN.m | 1230(19.2m×6t) |
Outrigger span (full extension) | Â | Â |
Longitudinal | m | 7.56 |
Lateral | m | 7.6 |
Lifting height | Â | Â |
Base boom | m | 13.5 |
Fully extended boom | m | 50.9 |
Fully extended boom+ jib | m | 70.4 |
Boom length | m | 13.5 |
Fully extended boom | m | 51 |
Fully extended boom+ jib | m | 51+18.1+4 |
Working speed | Â | Â |
Jib setting angle | ° | 0,15,30 |
Boom luffing time | s | 75 |
Boom | Â | Â |
Boom telescoping time | Â | Â |
Full extension | s | 160 |
Max. swing speed | r/min | 2 |
Outrigger extension/retraction time | Â | Â |
Outrigger beam in extension/retraction | s | 25/15 |
Outrigger jack in extension/retraction | s | 45/25 |
Lifting speed (single rope, layer 4) | Â | Â |
Main winch | m/min | 105 |
Aux. winch | m/min | 104 |
Photos:
1.. Which countries do we export to?
Asia:Â Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: South Africa, Ethiopia, Libya, Ghana,Algeria,etc.
2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare
parts,like engines,bridge,transmissions,and many parts designed and produced
by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians,Â
ready to provide support services to users and dealers. Most problems can be solvedÂ
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shallÂ
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted.Â
4. How long is the validity of our quotation?
As a reliable supplier, basically our price remains stable through one year, we only adjust
our price based on two situations:
1)The rate of USD
2)TheThe price of material
Other questions, please contact me directly!!
0086-15921244786
Â
MAFAL produce 130t truck with crane in Afirica
Feature:
1. Highlighted Advantages Show
   Innovative boom system with built-in sliding pad, plug-in boom head with patented technology and octagonal-shaped boom cross section provides excellent lifting capacity, safe and reliable lifting operations.
   Exclusive telescoping technology prevents occurrence of core tube bending, oil cylinder bending and boom breaking caused by mis-operation, and therefore operation safety is improved.
   The moment limiter equipped with color LCD realizes intelligent trouble diagnostic, and its precision leads in the same-class products in the industry.
   The ergonomic design cabs for the operator is spacious enough for flexible and convenient operations.
Specification:
Â
Dimension | Unit | QY130K-I |
Overall length, width, height | mm | 15600×3000×3850 |
Wheel base | mm | 1420+2420+1800+1420+1505 |
Weight | Â | Â |
Total weight in travel | kg | 54900 58000 |
Axle load | Â | Â |
Axle 1 | kg | 7500 7500 |
Axle 2 | kg | 7500 7500 |
Axle 3 | kg | 8300 10000 |
Axle 4 | kg | 12000 12500 |
Axle 5 | kg | 12000 12500 |
Axle 6 | kg | 7600 8000 |
Power | Â | Â |
Engine rated power | kW/(r/min) | 360/1800 (306/1900) |
Engine rated torque | N.m/(r/min) | 2200/1300 (2010/1200) |
Engine rated speed | r/min | 1800 (1900) |
Min. ground clearance | mm | 310 |
Travel | Â | Â |
Approach angle | ° | 20 |
Departure angle | ° | 14 |
Braking distance (at 30km/h) | m | ≤10 |
Max. grade ability | % | 40 |
Min. turning diameter | m | 24 |
Fuel consumption for 100km | L | 70 |
Main performance | ||
Max. rated total lifting capacity | m | 130 |
Min. rated working radius | Â | 3 |
Turning radius at turntable tail | Â | Â |
Counterweight | mm | 4200 |
Aux. winch | mm | 4590 |
Max. lifting torque | Â | 3450 |
Base boom | kN.m | 3450(4m×88t) |
Fully extended boom | kN.m | 1950(24m×7.1t) |
Fully extended boom+ jib | kN.m | 1230(19.2m×6t) |
Outrigger span (full extension) | Â | Â |
Longitudinal | m | 7.56 |
Lateral | m | 7.6 |
Lifting height | Â | Â |
Base boom | m | 13.5 |
Fully extended boom | m | 50.9 |
Fully extended boom+ jib | m | 70.4 |
Boom length | m | 13.5 |
Fully extended boom | m | 51 |
Fully extended boom+ jib | m | 51+18.1+4 |
Working speed | Â | Â |
Jib setting angle | ° | 0,15,30 |
Boom luffing time | s | 75 |
Boom | Â | Â |
Boom telescoping time | Â | Â |
Full extension | s | 160 |
Max. swing speed | r/min | 2 |
Outrigger extension/retraction time | Â | Â |
Outrigger beam in extension/retraction | s | 25/15 |
Outrigger jack in extension/retraction | s | 45/25 |
Lifting speed (single rope, layer 4) | Â | Â |
Main winch | m/min | 105 |
Aux. winch | m/min | 104 |
Photos:
1.. Which countries do we export to?
Asia:Â Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: South Africa, Ethiopia, Libya, Ghana,Algeria,etc.
2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare
parts,like engines,bridge,transmissions,and many parts designed and produced
by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians,Â
ready to provide support services to users and dealers. Most problems can be solvedÂ
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shallÂ
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted.Â
4. How long is the validity of our quotation?
As a reliable supplier, basically our price remains stable through one year, we only adjust
our price based on two situations:
1)The rate of USD
2)TheThe price of material
Other questions, please contact me directly!!
0086-15921244786
Â
HEBEI GEMMY IMP.& EXP.CO.,LTD , https://www.gemmycandles.com