Heavy Duty Cutter Suction Dredge Sand Pumps for Mud and Sand

Introduction:
 The heavy duty sand pump is one type of horizontal centrifugal pump. It is mainly used for dredging in river, lake, lagoon, pond, reservoir, etc. And it is usually installed in pontoon.It is very wearable for sand and mud dredging.The material of heavy duty sand pump is alloy cast iron, and high chrome white cast iron.The heavy duty sand pump size is from 6/4 inches to 20/18 inches. In accordance with clients' requirements, the pump can be connected to diesel engine or electric motor through triangle belt or connecting joint or gearbox.
Feature:
1Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
2.High chromium alloy and rubber impeller/ cover and frame plate liner/throat bushing
3Highly wear resistant and abrasive resistant rubber parts
4Shaft seal with packing/centrifugal seal with metal/rubber expeller ring/mechanical ring
5Transferring slurries with high erosion and in high density in industrial sectors such as of metallurgy, mining, coal, power generation and building materials.
6Our engineers available overseas
7Used in many state owned enterprises and major international companies
8Advanced means of design: CFD calculation and full 3D design

FAQ
Q: Are you a factory ? 
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.       
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. 

Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.   
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price. 
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.
 

  Introduction:
 The heavy duty sand pump is one type of horizontal centrifugal pump. It is mainly used for dredging in river, lake, lagoon, pond, reservoir, etc. And it is usually installed in pontoon.It is very wearable for sand and mud dredging.The material of heavy duty sand pump is alloy cast iron, and high chrome white cast iron.The heavy duty sand pump size is from 6/4 inches to 20/18 inches. In accordance with clients' requirements, the pump can be connected to diesel engine or electric motor through triangle belt or connecting joint or gearbox.
Feature:
1Slurry pump's bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, they can be removed completely when being repaired. Bearing assembly use grease lubrication.
2.High chromium alloy and rubber impeller/ cover and frame plate liner/throat bushing
3Highly wear resistant and abrasive resistant rubber parts
4Shaft seal with packing/centrifugal seal with metal/rubber expeller ring/mechanical ring
5Transferring slurries with high erosion and in high density in industrial sectors such as of metallurgy, mining, coal, power generation and building materials.
6Our engineers available overseas
7Used in many state owned enterprises and major international companies
8Advanced means of design: CFD calculation and full 3D design

FAQ
Q: Are you a factory ? 
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.       
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. 

Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.   
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price. 
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.
 

 

KOMATSU Connecting Rod

Komatsu Connecting Rod,Connecting Rod For Bearing,Connecting Rod For Engine,K20 Engine Connecting Rod

Wuhu Hangtian Automobile Connecting Rod Co., Ltd , https://www.htconrod.com