R0 loop resistance is about 5~200Ω
Frequency earth grounding network impedance tester technical parameters:
High Carbon Steel Wire Drawing Annealing Line
High and middle and low carbon wire drawing machine line
(I)Wire surface pretreatment line equipment
1. Equipment comprising and technical requirement
(1) Duck billed pay off stand
(2) Mechanical descaler machine
(3) Steel wire ball strong force cleaning up unit:
(4) Electroanalysis pickling
(5) Heating water channel unit:
(6) Boron coating unit:
(7) Drying unit:
2. Main technical parameter
â‘ Steel wire running speed: not less than 1.5m/s
â‘¡ The washing water pressure which is supplied by user: more than 0.2 Mpa
â‘¢ The uninterrupted compression air which is supplied by user: more than 0.6 Mpa.
(II) LZ Straight Line Drawer Set (Group)
1. Equipment comprising
(1) LZ600 straight feeding drawing set (group)
(2) 800 I spool taking-in set
(3) Man-machine interface control contact screen
(4) Whole set of electric console
|
Specs (mm) |
No. Of Drafts |
Max. Inlet wire (mm) |
Min. Outlet wire (mm) |
Motor Power (KW) |
Max. Speed (m/s) |
Noise dB(A) |
|
Φ250 |
9-12 |
1.8 |
0.35 |
2.2-4 |
12 |
80-82 |
|
Φ350 |
6-12 |
3.5 |
0.6 |
7.5-11 |
20 |
80-82 |
|
Φ400 |
6-12 |
4.2 |
0.75 |
11-15 |
20 |
80-82 |
|
Φ450 |
6-12 |
4.6 |
0.85 |
15-22 |
18 |
80-82 |
|
Φ500 |
6-12 |
5.5 |
1.0 |
22-37 |
18 |
80-82 |
|
Φ560 |
6-12 |
6.5 |
1.3 |
22-45 |
18 |
80-82 |
|
Φ600 |
5-10 |
7.0 |
1.8 |
37-55 |
16 |
80-82 |
|
Φ700 |
4-9 |
8.0 |
2.4 |
45-75 |
12 |
80-82 |
|
Φ800 |
4-9 |
10 |
2.8 |
55-90 |
10 |
80-82 |
|
Φ900 |
4-9 |
14 |
3.5 |
75-132 |
8 |
80-82 |
High Carbon Steel Wire Drawing Annealing Line,Low Carbon Wire Drawing Machine,Wire Drawing Machine,High-Carbon Wire Drawing Machinery
Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com