12V 10t Starter for Motor Delco Lester 6392 37mt

We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials.
 
Production Equipment:
 
The armature and stator are produced by automatic equipment.
 
Inspection equipment:
 
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
 
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
 
Whole set laboratory equipment:
 
We have whole set laboratory equipment for the starter performance test.
 
Market share:
 
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
 
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
 
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
 
Over 90% parts produced by our own factory
 
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
   
Major product family: 
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%): 
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 
 
We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
 
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949 We control the raw material with strict standard, especially for the copper wire. We use 10# steel and good magnet materials.
 
Production Equipment:
 
The armature and stator are produced by automatic equipment.
 
Inspection equipment:
 
We have more than 60 quality inspection equipment. We can inspect all items according to starter GB standard and analyze the quality differences.
 
Armature, stator, solenoid switch and the starter assembly are all 100% inspected.
 
Whole set laboratory equipment:
 
We have whole set laboratory equipment for the starter performance test.
 
Market share:
 
We are No 1 for single cylinder diesel engine starter production in China. The annual selling quantity is more than 400000 sets.
 
Experiences:
Plentiful Experience to ensure quality
Most of our workers are with more than 10 years even 20 years experiences.
Our R&D engineers are also with more than 20 years experiences.
 
9.  After-sales service:
Good and fast response for after- sale Services
Once we receive quality problems complaint, we will reply customer within 5 hours, if domestic customers, we our engineers will go to solve the problem in the spot as quick as possible.
Competitive price ------
 
Over 90% parts produced by our own factory
 
Regular Starters, Next Day Delivery.
Save Money Repair it, Do not replace it.
1 year warranty
100% brand new product
   
Major product family: 
    Alt: CS, AD, ND, Ford, SI, Leece Neville, Marelli, Bosch, Valeo, Mitsubishi, Lucas, etc.
    Str: Ford PMGR, PG260D/G/L/F1/F2/M, Bosch, Valeo, Mitsubishi, etc.
 Market (%): 
     North America 60%; Middle East 15%; Europe 15%; Local 10%.
 
 
We are specialized in Auto alternator and starter motor since 2000. Quality first, price second. Usually, our alternator and starter motor can match with each other smoothly in the same model Vehicle.
 
Our company boasts a high-quality management team from top to bottom for the purpose of an efficient operation system. We control every part and every working procedure strictly because we regard product quality as a basis of our corporate development. Based on the original ISO9001: 2000 International Quality Management System, all links of our production and management are strictly guided by the standard of ISO/TS16949

Drum Support

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Drum Support,Drum Spider,Washing Machine Tripod,Washing Machine Support

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.nbsunlee.com