- Model NO.: RCM-W
- Cooling Method: Water-cooled
- Selected Voltage: 380V/50HZ
- Noise Level: Low
- Application Machine: Machining Center
- Condition: New
- Transport Package: Wooden Case
- Origin: China
- Type: Water-Cooled
- Unit Structure: Scroll Comperssor
- Compressor Number: 1
- Application Fields: Plastic Industry,Electrical Industry,Food Industry
- Certification: CE, TUV
- Trademark: RHONG
- Specification: 1163x740x991MM
- HS Code: 8418699090
New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry.
1) Cooling temperature range 5-35oC.
2) High-capacity tube-in-shell evaporator with very good heat exchange performance especially for high ambient temperature condition.
3) Tube-in-shell evaporater with excellent heat transfer and rapid cooling.
4) Stainless steel warm-keeping water tank.
5) R22 refrigerant to be used for efficient cooling.
6) R407C environment-friendly refrigerant is optional to use.
7) Overload protection for compressor, pump and blower.
8) Independent temperature controller, anti-freeze protection.
9) Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10) Warm-keeping design for all piping to avoid partial convection.
11) Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonics.
Â
 |  | RCM-3W | RCM-4W | RCM-5W | RCM-8W | RCM-10W | RCM-12.5W | RCM-15W | RCM-20W | RCM-25W | RCM-30W | |
Chilling capacity | kw | 7.5 | 10 | 13.5 | 20 | 25.5 | 31.5 | 38.5 | 50 | 62.5 | 77.5 | |
Kcal/hr | 6500 | 9000 | 11500 | 16500 | 22000 | 27000 | 33000 | 44000 | 54000 | 66500 | ||
Compressor output power | HP | 3 | 4 | 5 | 8 | 10 | 12.5 | 15 | 20 | 25 | 30 | |
Refrigerant | - | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â R22Â Â Â Â R407C | ||||||||||
Evaporator | - |                                             Plate type | ||||||||||
Condenser | - |                                             Plate type | ||||||||||
Condenser in/out pipe diam | inch | 1" | 1½" | 2" | 2½" | |||||||
Tank capacity | L | 50 | 100 | 150 | 180 | 200 | 280 | |||||
Pumping Power | Kw | 0.75 | 1.1 | 2.2 | 2.2 | |||||||
 Pump Max flowrate | L/min | 80 | 150 | 250 | 400 | |||||||
Pump Max pressure | kg/cm2 | 2 | ||||||||||
Chilled Water outlet | lnch | 1/2"*4 | 1½" | 2" | 2½" | |||||||
Chilled size intlet | lnch | 1/2"*4 | 1½" | 2" | 2½" | |||||||
Overflow Port | lnch | 1/2" | ||||||||||
Dimension WxLxH | mm | 760*1250*980 | 800*1280*1050 | 850*1450*1250 | 1000*2000*1400 | |||||||
Weight | Kg | 120 | 140 | 180 | 220 | 280 | 350 | 400 | 450 | 550 | 600 |
Plesase excuse for not note if some specifications of products are changed
Note: 1) The cooling capacity is measured when the outgoing water temperature is 12oC and ambient temperature is 30oC.
      2) The refrigerant can use R407.For coding,use "N".For example,RCM-10W-N.
     3) The stardard voltage is 3¢,380V,50Hz. We also can make it as your requirments.
FFG-PG Glass Fiber Cloth is made by Braided non-alkali Glass Fiber or High Bulk Glass Fiber
Product introduce:
Glass fiber reinforced material woven cloth is material of hull, storage tank, cooling tower, ship, vehicle, pot and architectural structure.Glass fiber cloth is mainly used in industries for heat insulation, fire proof and flame resistance. It can absorb a lot heat and prevent the flame through the cloth when suffer flame burning, and make the air insulating.
The bulk fabric cloth have the same effect with glass fiber cloth.
1. Working at -196 degrees C up to 700 degrees C. Weather proof.
2. Very difficult to be sticked by any material.
3. Resistance to chemical corrosion: strong acid and alkali, aqua regia and all kinds of organic solvents.
4. Low friction coefficient.
5. Light Transmittance: 6~13 %.
6. High insulation property,anti-UV,anti-static.
7. High strength and very good mechanical performance.
Standard Sepcifications:
PART NO. Material THICKNESS/mm GRAIN/mm WIDTH/mm WEIGHT g/㎡
FFG-PG 02 Alkali-free glass fiber 0.2 plain 1.27 180
FFG-PG 04 Alkali-free glass fiber 0.4 broken twill 1.0 1.25 1.5 1.8 430
FFG-PG 05 Alkali-free glass fiber 0.5 satin 1 500
FFG-PG 06 Alkali-free glass fiber 0.6 satin/twill 1 660
FFG-PG 08 Alkali-free glass fiber 0.8 satin 1 1.2 1.25 1.5 840
FFG-PG 10 Alkali-free glass fiber 1.0 satin 1 1.2 1.25 1.5 1050
FFG-PG 15 Alkali-free glass fiber 1.5 satin 1 1.2 1.25 1.5 1500
FFG-PG/H 08 (Bulked Fiber) (High Bulked Glass Fiber) 0.8 plain 1 1.25 1.5 1.8 620
FFG-PG/H 10 (Bulked Fiber) (High Bulked Glass Fiber) 1 plain 1 1.25 1.5 1.8 800
FFG-PG/H 15 (Bulked Fiber) (High Bulked Glass Fiber) 1.5 plain 1.25 1.5 1.8 1000
FFG-PG /H 20 (Bulked Fiber) (High Bulked Glass Fiber) 2 plain 1 1.25 1.5 1.8 1300
FFG-PG/H 30 (Bulked Fiber) (High Bulked Glass Fiber) 3 plain 1 1.25 1.5 1.8 2000
Product picture:
Fire Resistant Fiber Cloth,Insulation Glass Fiber Cloth,Fiberglass Insulation Fabric Cloth,Aluminium Foil Glass Fiber Cloth
KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com