Trademark: AUGU
Origin: Qingdao
Trademark: AUGU
Origin: Qingdao
INTRODUCTION This machine has four stations, it is used to inflate the tyre to shapping the tyres. The sizes of tyre can be confirmed according to the client's requirements. The trial designing is for 4-20".
Advantage: PLC control system,High automation,the inflation time can be adjusted according to the curing time freely.
Small cover area.
parameters:
1,Power: 220V,50HZ
2,Air pressure: 0.3~0.7MPa
3,Weight: 300KG
4,Control model:PLC+TEXT DISPLAY
5,Operation height: 800mm
6,Production efficiency: 800-1100pcs/h
7,Overall size: 1000*400*2400mm(L*W*H)
FAQ
About machine performance quality
1.      Q:  How to guarantee the quality of outsourcing parts?
     A:  First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2.      Q:  Which brand of electric part?
     A: Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB
Customer can specify the brand.
3.      Q:  How to control the quality?
     A:   There are inspectors for inspecting equipment quality and performance, after assembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
About after-sales service
1.       Q: What is the warranty time?
      A:  2 years after machine arrived at factory
2.       Q:  How to solve the problem?
      A:  Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions.
       1, Which can be solved by phone or Email, it will be solved in two hours.
       2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem).
       3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine. INTRODUCTION
This machine has four stations, it is used to inflate the tyre to shapping the tyres. The sizes of tyre can be confirmed according to the client's requirements. The trial designing is for 4-20".
Advantage: PLC control system,High automation,the inflation time can be adjusted according to the curing time freely.
Small cover area.
parameters:
1,Power: 220V,50HZ
2,Air pressure: 0.3~0.7MPa
3,Weight: 300KG
4,Control model:PLC+TEXT DISPLAY
5,Operation height: 800mm
6,Production efficiency: 800-1100pcs/h
7,Overall size: 1000*400*2400mm(L*W*H)
FAQ
About machine performance quality
1.      Q:  How to guarantee the quality of outsourcing parts?
     A:  First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2.      Q:  Which brand of electric part?
     A: Use world famous brands, Siemens, Omron, Toshiba, Schneider, ABB
Customer can specify the brand.
3.      Q:  How to control the quality?
     A:   There are inspectors for inspecting equipment quality and performance, after assembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
About after-sales service
1.       Q: What is the warranty time?
      A:  2 years after machine arrived at factory
2.       Q:  How to solve the problem?
      A:  Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions.
       1, Which can be solved by phone or Email, it will be solved in two hours.
       2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem).
       3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.
All its structures are developed, designed and manufactured according to the requirements of CNC machine tools, with excellent characteristics of good precision stability and rigidity of the whole machine, small thermal deformation of the sleeve spindle unit, good thermal stability, good precision retention, maintenance-free and fast maintenance. the protection of YE-PTC51 series CNC lathe is fully enclosed structure (among which CY-PTC51200 is semi-enclosed double sliding door structure) and right-set operation station.
Heavy Duty Engine Lathe,Heavy Equipment,Heavy Duty Engine,Heavy Duty Lathe
Ningbo Yien Machinery Co., Ltd , https://www.nbyienmachinery.com