We have stock products of DIN6926 from M5-M10
If you select us,you will enjoy the service by our 10 years experienced sales!
We seek:
Professional service!
Good quality products!
Trustworthy factory!
Flange nuts (Stainless steel)
1. Standard: DIN6926,
2. Material: SS304,1.4301,SUS304
3. Colour: Bright
4. Package: Bulk in 25 kg carton, then in pallet
5. Delivery time: 3-15 days
Â
| Material are valid in stock | SS304,SS316 |
| Sizes are valid in stock | M5-M10 |
DIN6926 is our STOCK PRODUCTSWe have stock products of DIN6926 from M5-M10
If you select us,you will enjoy the service by our 10 years experienced sales!
We seek:
Professional service!
Good quality products!
Trustworthy factory!
Flange nuts (Stainless steel)
1. Standard: DIN6926,
2. Material: SS304,1.4301,SUS304
3. Colour: Bright
4. Package: Bulk in 25 kg carton, then in pallet
5. Delivery time: 3-15 days
Â
| Material are valid in stock | SS304,SS316 |
| Sizes are valid in stock | M5-M10 |
Coupling for High Pressure Cleaning Machine with Brass, Stainless Steel, Iron material. Fittings include welding, card sets and flared,
Male Coupling Connector Type:
End through connector, straight connectors, tees, elbows, with live nut joints, Swivel joints, plug, transition joints
Composed of dual ferrule fittings: Before the snap ring, after the snap ring nut
Materials commonly used are stainless steel and carbon steel
NPT, PT, G is the pipe thread.
NPT is National (American) Pipe Thread abbreviation belong American standard tapered pipe thread 60 degree, for North America. National standards can be found GB / T12716-1991
Pipe Thread PT is an abbreviation, is 55 degrees sealing cone pipe thread, is a Whitworth thread family, more for Europe and the Commonwealth countries. Commonly used in water and gas pipe industry, defined as 1:16 taper. National standards can be found GB / T7306-2000
G is 55 degrees non-thread sealing pipe thread, is a Whitworth thread family. G represents a threaded barrel mark. National standards can be found GB / T7307-2001
Also thread 1 / 4,1 / 2,1 / 8 mark refers to the thread diameter in inches.
Insiders usually points to refer to the thread size, one inch equals 8 points, 1/4-inch is 2 points, and so on.
G is the pipe thread collectively (Guan), divided into 55, 60 degrees are functional, commonly known as a round tube. That thread processing is made by a cylindrical surface.
ZG commonly known as the funnel, that thread processing by a conical surface made of pipe joints in general are like this, the old domestic thread standard male thread Rc labeled as R
Male Coupling,Brass Male Fitting,45 Degree Brass Couplers,Stainless Steel Coupling
NINGBO HAISHU OMWAY MACHINERY FACTORY (OMW Industrial) , http://www.omwindustrial.com