Sprinklers to repair water pumps

Modern car sprinkler pumps use centrifugal type. In use, common damages include: cracked pump casing, wear and bending of pump shaft, impeller crack, bakelite gasket and washer seat damage, aging of rubber seal, water seal cavity Wear, V-wheel hub and pump shaft, key and keyway are loose, etc. Damage to the water pump will cause poor water absorption, insufficient pressure, leakage, etc., resulting in overheating of the diesel engine and affecting the normal operation of the diesel engine. Work. To deal with its maintenance and repair:

First, the sprinkler repair water pump method

1. The shell of the pump shell can be repaired by welding or bonded with epoxy resin. The bearing seat hole can be worn out too much. It can be repaired by the bushing method. If there is any pit, groove or unevenness in the end face of the pump shell, the lathe can be turned. repair.

2. Corrosion of the pump shaft. The spots and recesses can be filled with tin and then rounded off. The pump shaft wear can be repaired by chrome plating. The bearing rotation should be flexible and free of noise.

3, water seal wear, rubber seal aging, deformation or damage, weakened water seal spring force or corrosion should be replaced.

Second, sprinkler pump repair and test:

1. Assemble the sprinkler truck's water pump shaft and impeller so that the end face of the impeller hole is 0.10-0.50mm higher than the end of the pump shaft (refer to the pump with the impeller fixed in the bolt) so as to press it tightly. Reinstall the seal, tighten the fixing bolt and install the water. Seal the assembly and lock it with a pin.

2. Put the pump impeller into the pump housing, put the rear bearing lock ring on one end of the shaft, and then install the rear bearing, spacer, and front bearing into the pump housing in turn (some pump bearings are integral type, then The integral type bearing can be loaded into the pump casing), and review its coordination, and finally insert the lock ring.

3. Mount the V-belt hub at the front end of the pump shaft, fasten it with bolts, and then install the V-belt pulley and fan blade. Fasten it with a nut, but lock it with an open lock (or locking piece).

4. Install the water pump cover plate and liner (some water pumps do not have cover plate). It requires 0.17-0.75mm clearance between the impeller and the cover plate (without the cover plate, between the impeller and the front wall of the cylinder block).

5. After the pump V-belt is installed, the oscillating error measured in the slot must not exceed 1.0 mm. The general rule of thumb is that when the impeller is moved, the pin has a gap feel.

6, the pump should be tested before loading. Experience is: hand to turn the V-belt, there should be no blocking phenomenon, blocking the pump casing inlet, and then add water to the impeller working room, turn the pump shaft, inspection hole should be Without water leakage, if there is jamming and water leakage, it should be identified and eliminated.

When conditions permit, the water pump should be installed on the test bench to run test to see its displacement and whether there is water leakage (no test bench can be compared with the new water pump). After the test is complete, the pump should be filled with grease.

JDM Auto Parts

We have different JDM part.

China Jdm Auto Parts,Jdm Car Accessories manufacturer, choose the high quality Jdm Universal License Plate Frame ,Jdm Tow Hook, etc.

Our company provides:OEM/ODM CNC machining turning milling service according to your drawing or samples.

Wholesale different car accessories,such as sensor spacer parts,car automotive oil filter and AN NPT treaded adapter,auto parts,Oxygen Sensor Spacer, o2 sensor tool,Car Antenna,Valve Caps,jdm car accessories ,we also oem odm different hardware and plastic parts with your drawing or samples.

Here have 20workers,1000m2 workshop.10sets cnc machines,12sets cnc lathes,5sets auto lathes.10 years experience.

Jdm Auto Parts,Jdm Car Accessories,Jdm Universal License Plate Frame ,Jdm Tow Hook

Dongguan Jiaxing Precision Machinery Co., Ltd. , https://www.jiaxingmachinery.com