Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
PVC dual strands twin pipe extrusion line china manufacturer
This PVC dual strands twin pipe extrusion line china manufacturer can produce the pipe size 32mm. this 16-32 mm PVC dual strands twin pipe extrusion line china manufacturer is with big capacity, can produce UPVC pipes in high capacity. . The PVC dual strands twin pipe extrusion line china manufacturer pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Material :Â Â Â Â Â Â Â Â Â Â Â Â Â Â UPVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controllerÂ
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
please check below machine pictures for your reference:
Material :Â Â Â Â Â Â Â Â Â Â Â Â Â Â UPVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controllerÂ
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
PVC dual strands twin pipe extrusion line china manufacturer
This PVC dual strands twin pipe extrusion line china manufacturer can produce the pipe size 32mm. this 16-32 mm PVC dual strands twin pipe extrusion line china manufacturer is with big capacity, can produce UPVC pipes in high capacity. . The PVC dual strands twin pipe extrusion line china manufacturer pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Material :Â Â Â Â Â Â Â Â Â Â Â Â Â Â UPVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controllerÂ
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
please check below machine pictures for your reference:
Material :Â Â Â Â Â Â Â Â Â Â Â Â Â Â UPVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controllerÂ
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
Our Engine power can be from 10kw to 300kw, with rated speed 1500 rpm to 2000 rpm.
The engines can be for many functions.
Such as generator set, at 50 hz or 60 hz.
With PTO shaft and belt pulley, to supply power output to drive machine.
Marine Engine, to use for marine generator. Or marine power with marine gearbox.
1),295/2100/495/4100/4102/4106 series are vortex flow type or direct injection high speed diesel engine. They are 2 cylinders, 4 cylinders, with cylinder liner 95 mm to 105 mm, and bore stroke 115 mm, speed between 1500 rpm to 2400 rpm. With the advantages of low fuel consumption, strong reliability, big torque, easy to start, convenient maintenance, they are perfect selection of generator, stationary fixed power, water pump, engineering machine and marine power. And we can also produce remodel machine depends on customer's specific requirements.
2),R4105/R6105/R6110/R6113 series diesel engine is developed by our factory, after learned wildly from UK-Ricardo Company. With power range of 50kw to 165kw, and speed is from 1500 rpm to 2400 rpm, can be used for generator, water pump, marine engine, etc.
3),6126/618 series is an advanced engine, which we introduced from Steyr-Daimler-Puch Spezialfahrzeug GmbH of Austria. Its displacement is 9.726L, and has naturally aspirated, turbocharged, and turbo-inter cooled model. Power range is from 200kw to 330kw, with speed between 1500rpm to 2400rpm. As with advantages of small volume, light in weight,
Less fuel consumption, low noise, high standard emission, high Universality, it is idea power for heavy truck, car, engineering industrial machine, marine and generator.
a),Steady and reliable Performance
This series engine of diesel engine are optimized designed by contain the structure performance, high intensity of original diesel engine. The performance and operating are thus steadier. And the life of engine has been also prolonged.
b), Strong power
All series engine are developed on basis of original model by optimizing its fuel system, air intake system, exhaust system, cooling system, transmitting system. Its power will be more efficiently.
c),Huatian engine, with perfect spare parts, various air filter, muffler, charge alternator, starter, air compressor, fan, radiator, oil cooler, electrical stop part, electrical governor. We can also design depends on customers specific requirements,
Engine
Generator Diesel Engine, Pto Engine, Gas Engines, Diesel Marine Engines
Weifang Huatian Diesel Engine Co., Ltd , https://www.higenset.com