Component of the machine:
1. Roll forming machine include guiding and cutting system
2. Decoiler(Manual or Automatic)
3. PLC control system
4. Hydraulic station
5. Output table(Stacker)
Main Specifications:
| Item NO |  Description |
Unit\Type | RF-RP |
| 1 | Material Thickness | mm |  0.7-1.2mm for Color coated steel |
| 2 | Forming Speed | m/min | 4-8 |
| 3 | Roller stands | stand | 16 |
| 4 | Roller Material | 45# steel, coated with chrome, fire treated, HRC 58-62 | |
| 5 | Shaft diameter and materail | 70, 45# steel, fire treated, HRC 58-62 | |
| 5 | Main Motor Power | Kw | 7.5 |
| 6 | Hydraulic cutting Power | Kw | 4 |
| 7 | Hydraulic pressure | Mpa | 12 |
| 8 | Power Supply | 380V, 50HZ,3 phase | |
| 9 | Tolerance | mm | 1.5 |
| 10 | Material of cutting | Cr12 | |
| 11 | Control system | PLC with touch screen | |
| 12 | Main machine weight | T | 6-7 Ton |
| 13 | Outer specification | m | 8*1.3*1 |
| 14 | Transmission Type | 1 inch chain drive |
Working Flow:
Uncoiling-Feedingwithguide-Roll forming-hydrauliccutting-Products collectingÂ
Die casting is a Aluminium or Zinc metal casting process that is characterized by forcing nolten metal under high pressure into a die mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mould during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter, and tin-based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.
The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high-volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small- to medium-sized castings, which is why die casting produces more castings than any other casting process. Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.
Die Casting Mould,Pressure Washer Aluminium Die Casting,Power Tools Aluminium Die Casting Mould,Filter Rear Cover Die Casting Mould
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com