The National Development and Reform Commission recently issued a notice on the adjustment of the on-grid price of photovoltaic power plants. The notice stipulates that after January 1, 2017, the benchmark electricity price of new photovoltaic power plants in the first to third types of resource areas will be adjusted to 0.65 yuan, 0.75 yuan, and 0.85 yuan per kWh respectively, which is 0.15 lower than the 2016 electricity price per kWh. Yuan, 0.13 yuan, 0.13 yuan, and at the same time, it is clear that the future PV benchmark price will be adjusted once a year according to the cost changes.
Analysts believe that the program does not adjust the subsidies for distributed photovoltaic power generation. The policy encourages the development of distributed photovoltaics, and distributed photovoltaics are expected to usher in rapid growth.
Photovoltaic electricity price is divided by resource area
The National Development and Reform Commission recently issued a notice to reduce the on-grid tariffs of photovoltaic power plants and onshore wind power in sub-resource areas, and the distributed photovoltaic power generation subsidy standards and offshore wind power benchmark electricity prices are not adjusted. The notice stipulates that after January 1, 2017, the benchmark on-grid tariffs for new photovoltaic power plants in the first to third categories of resource areas will be adjusted to 0.65 yuan, 0.75 yuan and 0.85 yuan per kWh respectively. The notice also clarifies that in the future, the PV benchmark price will be adjusted annually according to the cost changes.
In order to continue to encourage the development of distributed photovoltaic and offshore wind power, the distributed photovoltaic power generation subsidy standard and the offshore wind power benchmark price are not adjusted. The notice encourages all localities to continue to determine the types of new energy project owners and on-grid tariffs through market competition such as bidding.
The National Development and Reform Commission said that appropriately lowering the on-grid tariffs of photovoltaic power plants and onshore wind power benchmarks will help reduce the pressure on new energy subsidy funds. According to the current development of photovoltaic and wind power development, after the reduction of the on-grid tariff of photovoltaic power plants in 2017, the annual subsidy demand for new photovoltaic power plants will be reduced by about 4.5 billion yuan.
The notice pointed out that in order to rationally guide the photovoltaic industry to optimize the layout and encourage the development of new energy sources in the eastern region, the distributed photovoltaic power generation subsidy standard will not be adjusted, that is, the distributed photovoltaic power station adopting the mode of “spontaneous use and surplus electricity accessâ€, the country will still The power is given a subsidy of 0.42 yuan / kWh.
In addition, the National Energy Administration issued the “Notice on Adjusting the Scale of Photovoltaic Power Generation Construction in 2016â€, requiring all provinces (autonomous regions and municipalities) to report the demand for PV supplementation indicators in 2016, and provinces (autonomous regions and municipalities) with additional demand may use them in advance. Construction scale in 2017.
Distributed photovoltaic burst period
Assistant to the chairman of Leye Photovoltaic said that the price adjustment policy is very clear, resources are distributed to the distribution, and the continuation of the distributed PV policy will lead to the spring of industry development next year.
The "13th Five-Year Plan for Solar Energy Development" proposes to continue the construction of distributed photovoltaic power generation application demonstration zones. By 2020, 100 distributed photovoltaic application demonstration zones will be built. 80% of new building roofs in the park, 50% of existing Install photovoltaic power generation on the roof of the building; encourage the combination of barren hills and wasteland and comprehensive utilization of beaches, coal mining subsidence areas and other abandoned land management, facility agriculture, fishery and other methods, and carry out various "photovoltaic +" application projects according to local conditions.
Combined with the “13th Five-Year Plan†plan for electricity, 110 million kilowatts of photovoltaics contains 60 million kilowatts of distributed photovoltaics, and the target of 5 million kilowatts of offshore wind power targets. Distributed and offshore wind power will be the key support during the 13th Five-Year Plan period.
According to industry insiders, distributed PV will usher in explosive growth. In 2017, new distributed PV installations are expected to reach 5GW-10GW.
Guojin Securities analysts believe that the attractiveness of distributed projects will be greatly enhanced, considering that the benchmark power tariffs for centralized power plants will be significantly reduced in 2017 and the reduction of project indicators in the Three North Region will be difficult to improve. In addition, the advancement of electricity reform on the distribution side, especially the gradual establishment of electricity market transactions, will also push up the construction demand for distributed photovoltaic projects. It is expected that the proportion of distributed projects in new installed capacity in 2017 is expected to increase significantly. More than 30%. In 2015, this ratio was only 10%.
Two main lines are recommended to find distributed PV investment opportunities. First of all, enterprises with unique advantages in the acquisition, financing channels and product characteristics of distributed photovoltaic projects (roof resources), especially those with lower bases in the ground power station business; secondly, the cost performance advantage has gradually obtained the single crystal approved by the terminal owners. Industrial chain, especially high-efficiency single crystal. Due to the lack of index restrictions for distributed projects, the power to install as many watts as possible under a limited installation area is more sufficient.
NINGBO RUICAN MACHINERY COMPANY can meet high and tight tolerance by CNC machining process with [igs" or "stp" format drawings.
Our Machining Capabilities:
CNC Turning – CNC multi-axis machining centers for superior speed & flexibility
Custom Machining - expert machined components delivered on time
Screw Machine Products – precision components from a broad variety of materials & Equipment
Machining – micro-parts to 1-1/2 round diameter providing speed, high capability including precision tolerances and specialized finishes
High Volume Machining – Specialized in machined parts exceeding 500 pieces up to millions of pieces for optimum efficiency
CNC Milling - Machining from bar stock, plate or block metal using up to 3 axis of motion
Steel material machining parts
Steel Material Machining Parts,Custom Metal Parts Fabrication,Steel Material CNC Machining Parts,Machining Stainless Steel Parts
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com