MS-100 Halogen Moisture Analyzer Operation Procedure
1. Connect the power supply to the moisture meter.
2, open the cover, set the appropriate temperature 105 °C, time 10min, close the lid (factory settings have been set up)
3, open the back, heating power switch
4, press the ON button, there is a heating time setting, set to 0min (moisture meter automatically determine the loss of water rate of work, no change within 30s, that is, automatically stop the heating)
5, Close the lid, (press ON key), the sample begins to heat and lose water, the top of the display shows
9, in the heating process, the user press the MODE button, the display moisture parameters can be changed. (Each press, in order to display the moisture content, drying rate, moisture regain, wet weight rate)
6. Automatically stop heating when there is no change in weight within 30s
7. When the measurement is stopped, turn off the rear heating power switch.
Small size plastic injection moulding machines specially produce high procison mini Plastic Parts with fast response, stable quality.
Vertification of many year's market application, optimal combination configuration, stable, reliable and durable system with the characteristics of high efficiency, energy saving, low voice and strong power.
Program control adopts multiple CPU and high-end DSP chip, which guaranteed smooth and stable control property during high load processing.
BUlk-storage memory that can store many groups of technological parameter.
The application of USB can realize online updating, data export and simple operation.
Mini Plastic Parts Making Machines
Mini Plastic Parts Making Machines,Plastic Parts,Mini Making Machines,Mini Coaxial Cable
Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyongmachinery.com