PICTURES
PARAMETER
| Truck Brand | SINOTRUK -HOWO | ||||
| Driving Style | Left Hand Driving | ||||
| Dimension(Lx WÂ x H)(unloaded)(mm) | 8214x2496x3450 | ||||
| Cargo body size (L*W*H, mm) (mm) | 5400x2300x1500 16m3 | ||||
| Cargo thickness(mm) | Bottom:8mm, Side:4mm | ||||
| Lift type of Carriage | Middle side | ||||
| Approaching angle/Departure angle(°) | 19/26 | ||||
| Overhang(front/rear) (mm) | 1500/1739 | ||||
| Wheel base (mm) | 3625+1350 | ||||
| Max speed(km/h) | 75 | ||||
| Maximum gradeability (%) | 40 | ||||
| Minimum ground clearance(mm) | 314 | ||||
| Minimum turning circle (m) | 20 | ||||
| Curb weight(kg) | 12290 | ||||
| Loading Weight(kg) | 25000 | ||||
| Fuel tanker capacity(L) | 300 | ||||
| Fuel consumption(L/km) | 28L/100 km | ||||
| Clutch | Single-plate dry clutch Φ430mm | ||||
| Engine Model | Fuel type | Diesel | |||
| (Steyr technology, made in China) | |||||
| Â | Horse Power, max(kw/rpm) | 336HP,247/2200 | |||
| Â | Emission | EURO II | |||
|  | Model | WD615,water-cooled,four strokes,6 cylinders in line with water cooling , directly injection | |||
| Â | Bore | 126mm | |||
| Â | Stroke | 130mm | |||
| Â | Compression ratio | 29.8hp/l | |||
| Â | Specific fuel consumption | 195g/kwh | |||
| Transmission | Model | HW15710, 10 forwards and 2Â reverse | |||
| Brake system | Service brake | Dual circuit compressed air brake | |||
| Â | |||||
| Â | Parking brake | spring energy, compressed air operating on rear wheels | |||
| Â | |||||
| Â | Auxiliary brake | Engine exhaust brake | |||
| Steering system | Model | ZF8098 hydraulic steering with power assistance | |||
| Â | |||||
| Front axle | HF9 , Steering with double T-cross section beam | ||||
| Rear axle | HC16, Pressed axle housing, central double reduction with differential locks between axles and wheels | ||||
| Color | Optional (White ,Red ,yellow ) | ||||
| Tyre | 12.00R20 11pcs | ||||
| Electrical system | Battery | 2X12V/165Ah | |||
| Â | |||||
| Â | Alternator | 28V-1500kw | |||
| Â | Starter | 7.5Kw/24V | |||
| Cab | HOWO76 cab, single sleeper with air conditioner, all-steel forward control,55ºhydraulically tiltable to the front, 2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers | ||||
Phone: (+86) 183 5414 5160Â
Â
PICTURES
PARAMETER
| Truck Brand | SINOTRUK -HOWO | ||||
| Driving Style | Left Hand Driving | ||||
| Dimension(Lx WÂ x H)(unloaded)(mm) | 8214x2496x3450 | ||||
| Cargo body size (L*W*H, mm) (mm) | 5400x2300x1500 16m3 | ||||
| Cargo thickness(mm) | Bottom:8mm, Side:4mm | ||||
| Lift type of Carriage | Middle side | ||||
| Approaching angle/Departure angle(°) | 19/26 | ||||
| Overhang(front/rear) (mm) | 1500/1739 | ||||
| Wheel base (mm) | 3625+1350 | ||||
| Max speed(km/h) | 75 | ||||
| Maximum gradeability (%) | 40 | ||||
| Minimum ground clearance(mm) | 314 | ||||
| Minimum turning circle (m) | 20 | ||||
| Curb weight(kg) | 12290 | ||||
| Loading Weight(kg) | 25000 | ||||
| Fuel tanker capacity(L) | 300 | ||||
| Fuel consumption(L/km) | 28L/100 km | ||||
| Clutch | Single-plate dry clutch Φ430mm | ||||
| Engine Model | Fuel type | Diesel | |||
| (Steyr technology, made in China) | |||||
| Â | Horse Power, max(kw/rpm) | 336HP,247/2200 | |||
| Â | Emission | EURO II | |||
|  | Model | WD615,water-cooled,four strokes,6 cylinders in line with water cooling , directly injection | |||
| Â | Bore | 126mm | |||
| Â | Stroke | 130mm | |||
| Â | Compression ratio | 29.8hp/l | |||
| Â | Specific fuel consumption | 195g/kwh | |||
| Transmission | Model | HW15710, 10 forwards and 2Â reverse | |||
| Brake system | Service brake | Dual circuit compressed air brake | |||
| Â | |||||
| Â | Parking brake | spring energy, compressed air operating on rear wheels | |||
| Â | |||||
| Â | Auxiliary brake | Engine exhaust brake | |||
| Steering system | Model | ZF8098 hydraulic steering with power assistance | |||
| Â | |||||
| Front axle | HF9 , Steering with double T-cross section beam | ||||
| Rear axle | HC16, Pressed axle housing, central double reduction with differential locks between axles and wheels | ||||
| Color | Optional (White ,Red ,yellow ) | ||||
| Tyre | 12.00R20 11pcs | ||||
| Electrical system | Battery | 2X12V/165Ah | |||
| Â | |||||
| Â | Alternator | 28V-1500kw | |||
| Â | Starter | 7.5Kw/24V | |||
| Cab | HOWO76 cab, single sleeper with air conditioner, all-steel forward control,55ºhydraulically tiltable to the front, 2- arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel, air horn, with 4-point support fully floating suspension and shock absorbers | ||||
Phone: (+86) 183 5414 5160Â
Â
Our engineers design metal stamping tools and dies using advanced R&D software like Unigraphic, solidworks, Autodesk, Presscad, for automotive, Unigraphic is widely used on 3D model design, all tools are designed based on international standard, all machining and dies components will be listed clearly on drawings, sometimes, for complex design, 3D simulation will be conducted under different3D design for stamping dies production situation, to minimize the works of dies modification, to increase productivity drastically, and help us determine the most suitable size of press machine.
More services we offer:
Besides of Metal Stamping Components,the Amplifiers metel chassises and Panels, we also complete solution for OEM/ODM Products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, Plastic Injection Components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.
Heat sinks maximize the surface of an object to be cooled for heat dissipation to the air. It sounds simple, but there are still many factors to consider! Housing, air speed and the materials used play an important role in the efficiency of the chosen cooling method. The thermal resistance of the material, the design of the cooling fins, the post-treatment, and even the color of the heat sink are factors which are decisive for the efficiency of the cooling, as well as the attachment of the heat sink.
Cooler Heatsink,Long Life Cooler Heatsink,Laptop Heatsink Upgrade,Heat Sink With Fan
Timeplex Industrial Limited , https://www.hktimeplex.com