The main performance characteristics:
Big spindle bore and double chuck allows clamp and process big diameter pipes;
Integral machine bed adopts high strength iron to relize high rigidity and precision;
Ultrasonic requency quenched guide-ways are hard enough for good wear-resistance;
Equiped with taper guide bar device this enables the machine to process taper threads.
Application:
Q1327 heavy duty pipe threading lathe machine is mainly used for turning the internal and external threads including metric and inch thread,as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks,this machinery is equipped with taper guide bar device which enables this series to process taper thread.
This series lathe machine is widely used in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard accessories:
Tool post,Tailstock,Chuck,taper guide bar,Lighting lamp,Coolant pump,Rear support bracket,Pad iron etc.
Optional accessories:
Digital readout,Chuck,Faceplate,Chasing dial,Center rest,Signal light,Protective cover(lead-screw,chuck,tool post),and Grinding attachment etc.
Product main technical parameters:
| Specifications | UNIT | Q1327Â Pipe Lathe | |
| Capacity | Swing over bed | mm | 1000 |
| Swing over cross slide | mm | 610 | |
| Distance between centers | mm | 1500/3000 | |
| Pipe threading range | mm | 130-270 | |
| Width of bed way | mm | 755 | |
| Max.load capacity | T | 5 | |
| Spindle | Spindle bore | mm | 280 |
| Spindle speed steps | - | 12 steps | |
| Spindle speed range | rpm | 16-380 | |
| Chuck size | mm | 800 | |
| Chuck type | - | 4-jaw manual | |
| Turret | Turret type | - | Manual 4 position |
| Tool shank size | mm | 40x40 | |
| Turret travel | mm | 300 | |
| Carriage | X axis feed grade/range | mm/r | 64/0.05-12.15 |
| Z axis feed grade/range | mm/r | 64/0.1-24.3 | |
| X axis rapid traverse speed | mm/min | 1870 | |
| Z axis rapid traverse speed | mm/min | 3740 | |
| X axis travel | mm | 520 | |
| Z axis travel | mm | 1300/2800 | |
| Tailstock | Tailstock quill diameter | mm | 140 |
| Tailstock quill taper | - | MT#6 | |
| Tailstock quill travel | mm | 300 | |
| Motors | Main spindle motor | kW | 22 |
| Rapid traverse motor | kW | 1.5 | |
| Coolant pump motor | kW | 0.125 | |
| Thread | Metric thread grade/range | mm | 30/1-30 |
| Inch thread grade/range | T.P.I. | 27/1-28 | |
| Dimensions | Width x Height | mm | 2100X1600 |
| Length | mm | 6500 | |
| Weight | Net weight | T | 10.0/11.5 |
Contact Information :
The main performance characteristics:
Big spindle bore and double chuck allows clamp and process big diameter pipes;
Integral machine bed adopts high strength iron to relize high rigidity and precision;
Ultrasonic requency quenched guide-ways are hard enough for good wear-resistance;
Equiped with taper guide bar device this enables the machine to process taper threads.
Application:
Q1327 heavy duty pipe threading lathe machine is mainly used for turning the internal and external threads including metric and inch thread,as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks,this machinery is equipped with taper guide bar device which enables this series to process taper thread.
This series lathe machine is widely used in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard accessories:
Tool post,Tailstock,Chuck,taper guide bar,Lighting lamp,Coolant pump,Rear support bracket,Pad iron etc.
Optional accessories:
Digital readout,Chuck,Faceplate,Chasing dial,Center rest,Signal light,Protective cover(lead-screw,chuck,tool post),and Grinding attachment etc.
Product main technical parameters:
| Specifications | UNIT | Q1327Â Pipe Lathe | |
| Capacity | Swing over bed | mm | 1000 |
| Swing over cross slide | mm | 610 | |
| Distance between centers | mm | 1500/3000 | |
| Pipe threading range | mm | 130-270 | |
| Width of bed way | mm | 755 | |
| Max.load capacity | T | 5 | |
| Spindle | Spindle bore | mm | 280 |
| Spindle speed steps | - | 12 steps | |
| Spindle speed range | rpm | 16-380 | |
| Chuck size | mm | 800 | |
| Chuck type | - | 4-jaw manual | |
| Turret | Turret type | - | Manual 4 position |
| Tool shank size | mm | 40x40 | |
| Turret travel | mm | 300 | |
| Carriage | X axis feed grade/range | mm/r | 64/0.05-12.15 |
| Z axis feed grade/range | mm/r | 64/0.1-24.3 | |
| X axis rapid traverse speed | mm/min | 1870 | |
| Z axis rapid traverse speed | mm/min | 3740 | |
| X axis travel | mm | 520 | |
| Z axis travel | mm | 1300/2800 | |
| Tailstock | Tailstock quill diameter | mm | 140 |
| Tailstock quill taper | - | MT#6 | |
| Tailstock quill travel | mm | 300 | |
| Motors | Main spindle motor | kW | 22 |
| Rapid traverse motor | kW | 1.5 | |
| Coolant pump motor | kW | 0.125 | |
| Thread | Metric thread grade/range | mm | 30/1-30 |
| Inch thread grade/range | T.P.I. | 27/1-28 | |
| Dimensions | Width x Height | mm | 2100X1600 |
| Length | mm | 6500 | |
| Weight | Net weight | T | 10.0/11.5 |
Contact Information :
Coffee Tamper
The best barista coffeeware----Coffee Tamper. Which can help customers taste the best espresso .
About the coffee tamper ,we have many different kinds for you to select.
Coffee tamper with different kinds of wooden handle is our hot sell items.
The whole stainless steel coffee tamper also with high quality, we also have the color coffee tamper items.
Our customer usually combine the coffee tamper with the silicone tamper mat and the clean brush as one set to sell ,which is the selling point to catch the market.
Any items need to know more or any idea about it, please don`t hesitate to contact us.
Will be glad to hear from you.
Description of Coffee Tamper
Size : 49mm/51mm/58mm
Material: Body: SS304+wood/Aluminum
Color/wood type :customized
Finishing: Satin polishing ,Mirror Polishing ,Color painting
Logo: Laser logo, Etching logo, Silk printing logo, Embossed logo, Decal logo
MOQ : 2000 PCS
Packaging : White box, Mail box or Customized package
Sample Time : 7~10 days
Lead Time :60 days after have the deposit
Payment: T/T ,L/C or others
Payment term: 30% deposit before production and 70 % balance against the copy B/L
FAQ:
1:How can I get the sample?
We can provide the sample for customers to check the quality.
Please kindly provide the delivery info for calculate the sample cost. If you have DHL /TNT/UPS/FEDEX account, please also kindly provide it to us.
You can do the payment of sample via T/T and PayPal.
2:How about the sample time?
Usually the sample time is 7~10 days after have the sample cost.
3:How long will it take for mass production?
Usually 45~60 days after have the deposit.
4:Can we have our logo or company name to be printed on your products or the package?
Welcome OEM.
5:what certificate can you provide?
CE,CB,GS,FDA,LFGB,ROHS are available here.
6:How can we get your monthly new products announcement?
Please join our mailing lists.
Espresso Tamper,Barista Tamper,Espresso Coffee Tamper,Barista Coffee Tamper
Jiangmen Wellway Houseware Co.,Ltd , https://www.hkwellway.com