NEW ADVANCED TECHNOLOGY BELT SCRAPER
Near maintenance-free patented ceramic belt scraper cleaner. Exceptional performance & durability by optimal contact of multiple tipped alumina ceramic cleaning edges. Simply & quickly installed without modifications. 24/7 relentless cleaning of abrasive, corrosive, wet, oily, hot, sticky, frozen, powdery & encrusted solids. Prevent material buildup, carry back, spills, dust & downtime.
The Ceramic Belt Scraper is a radical improvement compared With the common plate-type cleaners using a polyurethane or UHMW polyethylene wear segment. This unique ceramic belt Cleaner can be installed on a diagonal in front of the head pulley. The adjustable, spring-loaded holders ensure full contact, even if Belt is worn or pulley is crowned. The main material of the belt Cleaner is ceramics, which of more abrasion and corrosion Resistance.
Application:
Steel mill, mining and mineral idustry, cement and port industry ect.
Specification:
24inch to 96 inch belt width or belt width with customers' requirements
Installation:
NOTE:
1. Between the end of the ceramics and belt have a slight space (2-3mm) is okÂ
and the angle should between 2535 degrees, it also depend on the diameter
 of the belt conveyor roller.
2. The tension of the two cables (wire rope) must be equal all the time.
3. The nuts and tension of the springs should be checked everyday during theÂ
first month of operation.
Â
NEW ADVANCED TECHNOLOGY BELT SCRAPER
Near maintenance-free patented ceramic belt scraper cleaner. Exceptional performance & durability by optimal contact of multiple tipped alumina ceramic cleaning edges. Simply & quickly installed without modifications. 24/7 relentless cleaning of abrasive, corrosive, wet, oily, hot, sticky, frozen, powdery & encrusted solids. Prevent material buildup, carry back, spills, dust & downtime.
The Ceramic Belt Scraper is a radical improvement compared With the common plate-type cleaners using a polyurethane or UHMW polyethylene wear segment. This unique ceramic belt Cleaner can be installed on a diagonal in front of the head pulley. The adjustable, spring-loaded holders ensure full contact, even if Belt is worn or pulley is crowned. The main material of the belt Cleaner is ceramics, which of more abrasion and corrosion Resistance.
Application:
Steel mill, mining and mineral idustry, cement and port industry ect.
Specification:
24inch to 96 inch belt width or belt width with customers' requirements
Installation:
NOTE:
1. Between the end of the ceramics and belt have a slight space (2-3mm) is okÂ
and the angle should between 2535 degrees, it also depend on the diameter
 of the belt conveyor roller.
2. The tension of the two cables (wire rope) must be equal all the time.
3. The nuts and tension of the springs should be checked everyday during theÂ
first month of operation.
Â
Tension Machine is a kind of feedthrough pre-tensioing. It is also called Spun Pile tension jack machine, Pole Tension Machine, prestressed tension machine etc. It is the neccesary equipment to produce Pre-stressed Concrete Spun Pile and prestressed concrete pole products. As the end of the tension rod is connected to the anchor with thread, it can be applied to various forged anchors, chilled iron anchor used for stayed-cable bridge and other similar anchors, as well as pre-tension pulling for pipes. In accordance with actual requirement.
Tension jigs are normal 7parts or 5 parts for re-pretress pole and pile, including tension nut, tension rod, support plate, tension plate, connect plate, joint ring, fixed plate etc. we can customize for you. It meet the wire and pc bar's requirement.
If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Tension Machine,Tension Jig,Pile Tension Jig ,Pole Tension Machine
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , http://www.jshaiheng.com