Heavy Duty Slurry Pump Ore Pulp Slurry Pump with Single Stage Suction

Product Description of water pump

ZS series slurry pump is developed to be of the advanced world level based on our 40 years of pump manufacturing and abundant trash pump technology, fully analyzing its different field operation requirements for different industrial applications, introducing the most advanced design theory and collecting the trade talents at home and abroad.



 

Feature of water pump

1. Our Pump wet parts are made of wear-resistant high chromium alloy.

2. Our Pump bearing assembly use cylindrical structure, adjusting the space between impeller

   and front liner easily. They can be removed completely when being repaired. Bearing assembly

    use grease lubrication.

3. The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump.

4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to

     any eight positions to suit installations and applications at its working site.

5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and

      frequency conversion drive devices.

6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in

     multistage series to meet the delivery for long distance.


 

Application of water pump

Mainly convey various concentrations of abrasive slurry or corrosive slurry, is an ideal product to slurry transportation

1.Mine:black, non-ferrous ore slurry material pump and all kinds of concentrate and tailings conveying

2.Metallurgy:transport various slurry for aluminium or steel manufacture

3.Coal: Coal mining, washing and various coarse and fine coal slurry transportation

4.Electricity: remove power plant ash,wash ash,various ash dregs or ash slurry transportation

5.Construction materials:various mud sand slurry(such as Cement slurry) transportation

6.Chemical: phosphatic fertilizer or potassic fertilizer factory various abrasive slurry trasportation

7.Water conservancy:lake,river dredge, sediment,grit, High plastic clay Suction line to transportation

Advantages of water pump

Wear - resistant rubber as liners prolongs the service life by 2-4 times
Internal rubber liners with small specific gravity can effectively improve the impeller speed. Maximum flow rate than other slurry pump can improve the efficiency of the whole 10-20%, overall efficiency increased more than 30%.
Small specific gravity wet parts, convenient maintenance, low noise; reduce the number of repair personnel and the operational maintenance cost
Smooth wet parts make operation more stable

Product Structure

The main components of wear-resistant slurry pump includes impeller, motor, sheath etc. Sheath and impeller. The auxiliary suspenders simply remove the pump shell, and are convenient for maintenance.

 

Technical Parameters of water pump

Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant

Our Services

1. One year guarantee.

2. Sample testing.

3. our technician can design your project based on your information such as flow chart.

4. Engineer available for over seas installation and training.

5. after sale service, such providing spared parts.
 

FAQ

Q: Are you a manufacturer of spiral chute?

A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi.
 

Q: What is the warranty of spiral chute?

A: 1 year.

 

Q: will you help to install spiral chute machinery?

A: If you need, we will have our technicians to assist you for installation. 

 

Q:Could your company provide customized products?

A: Yes. OEM is welcome.

Contact

Product Description of water pump

ZS series slurry pump is developed to be of the advanced world level based on our 40 years of pump manufacturing and abundant trash pump technology, fully analyzing its different field operation requirements for different industrial applications, introducing the most advanced design theory and collecting the trade talents at home and abroad.



 

Feature of water pump

1. Our Pump wet parts are made of wear-resistant high chromium alloy.

2. Our Pump bearing assembly use cylindrical structure, adjusting the space between impeller

   and front liner easily. They can be removed completely when being repaired. Bearing assembly

    use grease lubrication.

3. The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump.

4. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to

     any eight positions to suit installations and applications at its working site.

5. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and

      frequency conversion drive devices.

6. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in

     multistage series to meet the delivery for long distance.


 

Application of water pump

Mainly convey various concentrations of abrasive slurry or corrosive slurry, is an ideal product to slurry transportation

1.Mine:black, non-ferrous ore slurry material pump and all kinds of concentrate and tailings conveying

2.Metallurgy:transport various slurry for aluminium or steel manufacture

3.Coal: Coal mining, washing and various coarse and fine coal slurry transportation

4.Electricity: remove power plant ash,wash ash,various ash dregs or ash slurry transportation

5.Construction materials:various mud sand slurry(such as Cement slurry) transportation

6.Chemical: phosphatic fertilizer or potassic fertilizer factory various abrasive slurry trasportation

7.Water conservancy:lake,river dredge, sediment,grit, High plastic clay Suction line to transportation

Advantages of water pump

Wear - resistant rubber as liners prolongs the service life by 2-4 times
Internal rubber liners with small specific gravity can effectively improve the impeller speed. Maximum flow rate than other slurry pump can improve the efficiency of the whole 10-20%, overall efficiency increased more than 30%.
Small specific gravity wet parts, convenient maintenance, low noise; reduce the number of repair personnel and the operational maintenance cost
Smooth wet parts make operation more stable

Product Structure

The main components of wear-resistant slurry pump includes impeller, motor, sheath etc. Sheath and impeller. The auxiliary suspenders simply remove the pump shell, and are convenient for maintenance.

 

Technical Parameters of water pump

Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant

Our Services

1. One year guarantee.

2. Sample testing.

3. our technician can design your project based on your information such as flow chart.

4. Engineer available for over seas installation and training.

5. after sale service, such providing spared parts.
 

FAQ

Q: Are you a manufacturer of spiral chute?

A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi.
 

Q: What is the warranty of spiral chute?

A: 1 year.

 

Q: will you help to install spiral chute machinery?

A: If you need, we will have our technicians to assist you for installation. 

 

Q:Could your company provide customized products?

A: Yes. OEM is welcome.

Contact

Iron Shielded Deep Groove Ball Bearing is one type of ball bearings. shields are non-contact metallic (carbon or stainless steel) devices which allow high-speed operation but offer limited protection against the ingress of moisture and dirt. but do not protect against liquids. They add no friction during operation and therefore do not generate heat build-up. Iron shielded deep groove ball bearings often have steel shields installed on one or both sides and are pre-lubricated with grease. While many different retainers are available, pressed steel cages are most commonly used.

Bearing dust shields have been available almost as long as Ball Bearing itself. Shields are needed to stop the grease lubrication used in these bearings from leaking out. This is particularly important in applications where grease leakage may contaminate the product. The main impetus towards shielded bearings comes from the growing use of [sealed-for-life" bearings in items such as white goods, cars and power tools. Shields are fitted in the outer ring and do not make contact with the inner ring, but form a narrow gap with it.

Depending on the bearing design, series and size, MANU supplies shields in different designs.

 

With one shield (-Z) on one side or two shields (-2Z/ZZ) on both sides;  Due to the manufacturing processes used, open bearings can have turned recesses in the outer ring for shields.

 

 

 

Celarance:

Internal clearance provides the bearing room for expansion between the bearing races and will add a small amount of play between the two rings. Large clearance C3/C4 usually used in harsh environment. with good anti-seize performance used in particularly harsh environment.

 

Tolerances

The standard version of our single-row deep groove ball bearings has the tolerance class P0

(designs with tighter tolerances available upon request)

 

To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.

 

Iron Shielded Deep Groove Ball Bearing

Iron Seals Ball Bearing,Iron Sealed Ball Bearing,Iron Shielded Bearing,Steel Shielded Bearing

Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl