Model NO.: FIF-100K
Ice Shape: Flake Ice
Application Fields: Aquatic Fishery
Certification: ISO, CE
Condition: New
Power Supply: 380V/3p/50Hz/ 220V/3p/60Hz
Refrigerant System: R22 / R404A
Color of Machine: Blue Painting
Cooling Mode: Water Cooling / Air Cooled
Ice Storage Capacity: 5ton to 10tons Equipped for 10tons Flake Ice Make
Warranty: 15 Months
Control: Electrical
Material: Stainless Steel Evaporator
Material of Structural: Galvanized Steel
Daily Capacity: 500kg to 60tons Day Available
Trademark: Focusun
Transport Package: Wood
Specification: CCC. CE. ISO.
Origin: Shanghai China
HS Code: 8418699020
Standard power supply for large capacity flake ice machine is 380V/3P/50Hz and it can be customized.
Configuration:Â one or more sets of Bitzer semi-hermetic screw compressor with economizer; water cooling way (air cooling or evaporative cooling is also suitable for special condition.)
Installment:Â all equipment except the cooling tower are installed on one steel frame so it is very convenient to install on spot and can be put into use immediately after hooking it up to the water resource and electricity circuit. The cooling method of the condenser can be customized.
Application:Â industrial concrete mixing project, artificial skiing ground, etc.
Features
Low investment, energy saving and low operational cost
Environmentally friendly and highly efficient
Full automatic design, accurate design, low fault rate and minimum maintainance cost.
The environment-friendly design decreases energy waste and greenhouse gas emission(A21E).
Excellent sales service and strong technical support
Large capacity flake ice machine technical parameter
| Model | Capacity | Refrigerant | Electricity consumption | Installment power | Operating weight | Dimension |
|---|---|---|---|---|---|---|
| -- | Ton/D | -- | Kw | Kw | Kg | mm |
| FIM -250K | 25 | R22/R404A | 78.85 | 95 | 4500 | 4200×2000×3050 |
| FIM -300K | 30 | R22/R404A | 102.45 | 125 | Unit:2800 | 2800×2200×2200 |
| Evaporator:4500 | 2400×2000×3000 | |||||
| FIM -350K | 35 | R22/R404A | 115.35 | 140 | Unit:2800 | 2800×2200×2200 |
| Evaporator:4600 | 2400×2000×3200 | |||||
| FIM -400K | 40 | R22/R404A | 147.35 | 180 | Unit:3000 | 2800×2200×2200 |
| Evaporator:5500 | 2800×2400×3600 | |||||
| FIM -500K | 50 | R22/R404A | 176.30 | 220 | Unit:3200 | 2800×2200×2200 |
| Evaporator:6500 | 3000×2500×4500 | |||||
| FIM -600K | 60 | R22/R404A | 214.90 | 280 | Unit:4500 | 3400×2200×2200 |
| Evaporator:6500 | 3000×2500×4500 | |||||
| Standard condition: Dry ball temperature is 33 ºC and water inlet temperature is 20ºC. | ||||||
Continuous and rapid ice making, automatic control process.
Â
The unit structure is compact and can be placed above the ice room, covering small area.
Â
Photoelectric switch automatically measures the ice room capacity.
Â
Evaporators, ice scrapers and ice rooms are all made of stainless steel.
Â
Flake ice is a kind of irregular squamous ice, ranging from 1.5-2.5mm wide.
Â
Temperature of flake ice may reach -8 DEG C below, good for storage and transport.
Â
It is dry and loose and can be directly used to cool and stir cooled objects.
Â
Large contact area with fresh goods, rapid cooling speed.
Â
Flake ice has no sharp edges so it can't damage the surface of cold preservation objects.
Â
Quick Details
Â
Refrigerants R22
Refrigerants R404as
Daily outputkg/24h:10,000kh
Ice Thickness:1.8-2.5mm
flake ice temperature:Â -8degreeÂ
Power supply:3P/220V/60HZ/3P/380V/50HZ
Â
Â
Advantages of flake ice produced by flake ice maker machine:
Â
1. Large contact area: As its flat and thin shape, it has got the largest contact area among all types of ice. The larger its contact area is, the faster it cools other stuff. In comparison with 1 ton of cube ice, 1 ton of flake ice has 1799 sqm of contact area while 1 ton of cube ice only has 1383 sqm, therefore the flake ice has got much better cooling effects than cube ice.
Â
2. Low cost of producing
Â
The producing of flake ice is very economical, it only requires 1.3RT refrigerating effect to make 1 ton of ice from16C water.
Â
3. Perfect in food cooling
Â
Flake ice is type of dry and crispy ice, it hardly forms any shape edges, in food cooling process, this nature has made it the best material for cooling, it can reduce the possibility of damage to food to the lowest rate.
Â
4.Thoroughly mixing
Â
Flake ice can become water quickly through the rapid heat exchanging with products, and also supply the moisture for products to be cooled.
Â
Applications of Focusun industrial flake ice making machine:
Focusun flake ice machine are widely applied in processing & preservation of aquatic products and fruit & vegetable, poultry slaughter, meat processing, machine & chemical projects, textile printing, deep-sea fishing, laboratory refrigeration and concrete pouring, etc.
Â
Please feel free to contact me!Â
Â
| Item | Unit | Parameter | ||||
|---|---|---|---|---|---|---|
| Power supply | Voltage/Phase/Frequency | 380V/3P/50Hz | ||||
| Refrigerant | Â | R404A | ||||
| Capacity | kg/24h | 10000 | ||||
| Cooling Way | Â | Water Cooling | ||||
| Temperature | Ambient Temperature | Deg C | 35 | |||
| Water Temperature | Deg C | 20 | ||||
| Compressor | Manufacturer | Â | Bitzer/Carrier | |||
| Refrigeration Power | kw | 60.6 | ||||
| Operating Power | kw | 30.36 | ||||
| Compressor COP/EER | kw/kw | 2 | ||||
| Horse Power | hp | 25×2types | ||||
| Operating power | Total running power | kw | 34.31 | |||
| Installation Power | kw | 42 | ||||
| Power of Reducer | kw | 0.75 | ||||
| Power of Cold Water Pump | kw | 0.25 | ||||
| Cooling Water Pump | kw | 2.2 | ||||
| Fan of Cooling Tower | kw | 0.75 | ||||
| Dimension | Size of Ice Maker | L×W×H(mm) | 3550×1550×2100 | |||
| Size of Cooling Tower | L×W×H(mm) | 1580×2205mm | ||||
| Size of Water Feeding Pipes of Cooling Tower | Â | 6" | ||||
| Size of Cooling Water Pipes | Â | 2.5" | ||||
| Size of Feeding Pipe | Â | 6" | ||||
| Size of Ice Outlet | mm | 922mm | ||||
| Weight | Weight of Flake Ice Maker | kg | 2200 | |||
| Operating Weight of Cooling Tower | kg | 540 | ||||
| Water supply pressure requirement | bar | 1~6 | ||||
Machinery Part Die Casting Hardware/ Investment Casting/ Precision Die Casting:
Features:
1. Top Quality Die Cast Machined Parts for Machinery or Auto
2. Tight Tolerance, Strong and Durable
3. Competitive price, prompt delivery
4. Available at different material, dimension and design
5. OEM orders/ ODM orders are welcome
6. Material Available: Copper/ Alloy/ Stainless and other metal available for die casting
We foster customer loyalty by providing innovative casting and machining solutions to customers.
Look forward to receiving specific enquiries for our quotation.
Die Casting,Die Casting Part,Precision Die Casting,Metal Die Cast
Huiye Hardware & Electrical Equipment Company Ltd. , https://www.hardwarehuiye.com