Certification: CE, ISO
Max. Temperature: 300 Centigrades
Viscosity: 5~1500 Cst
Max. Pressure: 0.6 MPa
Speed: 740~1470 R/Min
Flow Capacity: 18.3~7600 L/Min
Trademark: Hengnuo
Transport Package: Steel Frame, Wooden Box
Specification: CE, SGS, ISO9001
Origin: Botou City, Hebei Province
HS Code: 8413602990
Gasoline Oil Gear PumpSpecifications:
|
Model |
Flow |
Pressure |
Suction height |
Speed |
Motor |
|
| m³/h | MPa | M | r/min | Model | Power | |
| KCB-18.3 | 1.1 | 1.45 | 5 | 1400 | Y90L-4 | 1.5KW |
| 2CY8-1.1/1.45 | ||||||
| KCB-33.3 | 2 | 1.45 | 5 | 1420 | Y100L1-4 | 2.2KW |
| 2CY-2/1.45 | ||||||
| KCB-55 | 3.3 | 0.33 | 5 | 1400 | Y90L-4 | 1.5KW |
| 2CY-3.3/0.33 | ||||||
| KCB-83.3 | 5 | 0.33 | 5 | 1420 | Y100L1-4 | 2.2KW |
| 2CY-5/0.33 | ||||||
| KCB-135 | 8 | 0.33 | 5 | 940 | Y112M-6 | 2.2KW |
| 2CY-8/0.33 | ||||||
| KCB-200 | 12 | 0.33 | 5 | 1440 | Y112M-4 | 4KW |
| 2CY-12/0.33 | ||||||
| KCB-300 | 18 | 0.36 | 5 | 960 | Y132M2-6 | 5.5KW |
| 2CY-18/0.36 | ||||||
| KCB-483.3 | 29 | 0.36 | 5 | 1440 | Y160M-4 | 11KW |
| 2CY-29/0.36 | ||||||
| KCB-633 | 38 | 0.28 | 5 | 970 | Y160L-6 | 11KW |
| 2CY-38/0.28 | ||||||
| KCB-960 | 58 | 0.28 | 5 | 1470 | Y180L-4 | 22KW |
| 2CY-58/0.28 | ||||||
| KCB-1200 | 72 | 0.6 | 5 | 740 | Y280S-8 | 37KW |
| KCB-1600 | 95 | 980 | Y280S-6 | 45KW | ||
| KCB-1800 | 112 | 0.6 | 5 | 740 | Y315S-8 | 55KW |
| KCB-2500 | 150 | 985 | Y315S-6 | 75KW | ||
| KCB-2850 | 170 | 0.6 | 5 | 740 | Y315L1-8 | 90KW |
| KCB-3800 | 230 | 989 | Y315L1-6 | 110KW | ||
| KCB-4100 | 245 | 0.6 | 5 | 743 | Y355M1-8 | 132KW |
| KCB-5400 | 325 | 989 | Y355M1-6 | 160KW | ||
| KCB-5600 | 330 | 0.6 | 5 | 744 | Y355M2-8 | 160KW |
| KCB-7000 | 420 | 744 | Y355L1-8 | 185KW | ||
| KCB-7600 | 460 | 0.6 | 5 | 989 | Y355M3-6 | 200KW |
| KCB-9600 | 570 | Â Â 989 | Y355L2-6 | 250KW | ||
Application:
1.It is widely applied in mining sites, oil reservoirs, factories, piers, ships, and farms.
2.It can serve as transfer pump or booster pump in oil delivery system.
3.It is used in fuel supply system as fuel pump for delivery, pressurization and injection.
4.It always can give performance as lubricating pump in all inustries.
Please Note:
1. The temperature of the mentioned fluidity should be below 70°C.
2. The viscosity of the mentioned fluidity should be in 5x10-6-1.5x10-3m2/s (5-1500cSt)
3. When speed is reduced, it can deliver fluids whose viscosity is up to 55x10-2m2/s (50000cSt)
Advantages:
Supported by the following advantages, our pump performs well in many industrial areas, especially in mining.
1.Designed uniquely and cast with advanced technology, it offers a wide range of capacity from 1m³/h to 60m³/h.
2.It adopts a new mechanism of gear to transport medium with high viscosity.
3.This pump performs stably with low noise and high efficiency,thus enjoying long service life.
Structure Features:
KCB series gear pumps are mainly composed of gears,axles pump body,pump,cap safety valve and axle-end seals etc.The heattreated gears have the advantage of higher hardness and intensity,and rotate with the axles inside the replaceable bearing sleeves.All of pump's parts can be lubricated by delivered medium when working.
The pump is properly designed with leakage and return chute,which lets the gears bear the least torque force and reduces load and wear on bearings bear the least torque force and reduces load and wear on bearings in order to raise pump's efficiency.
It is also designed with safty valve for protection against overload.The full return flow pressure of the safety valve is 1.5times higher than the rated exhaust pressure of the pump.It can be also adjusted within the allowance of exhaust pressure range according to circumstances .But please note the safty valve can't be applied as pressure-reducing valve for long time .You may install pressure-reducing valve separately on pipe-line if needed.
Â
Counter Flow Closed Cooling Tower
Let's look at the comparison of electric energy, electric energy is not different, because they are all through the same power equipment to operate the equipment, the power of the two is similar, the running time is the same, basically the energy consumption is about the same.
To sum up, for the Closed Cooling Tower energy saving accounting can be strong to open the tower out, and, today are advocating energy conservation and environmental protection, this is the general trend, so the closed cooling tower is more and more favored by the majority of users.
Counter Flow Closed Cooling Tower,Closed Type Cooling Tower,Cooling Tower Closed Loop System,Closed Circuit Cooling Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com