EPS Wall Panel Produced Machine Concrete Lightwegith Sandwich Panel Machine

Lightweight Gypsum Wall Panel/ Wall Board Making Machine
Light Weight Wall Board Machine EPS Cement Wall Board Making Machine With 50000m2 to 500000m2/year Output


What is Light Weight Wall Board/EPS Cement Wall Board:
EPS sandwich cement wall board is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives, and the panel formed by the EPS wall board making machine.

Product size: length 2440mm, width 610mm, thickness 60-180mm (size and thickness can be adjusted). The two surfaces of the new type composite sandwich board are composed of high strength water resistant calcium silicate board with good waterproof properties; good thermal insulation EPS bonding mortar as Core material; The product is of structural function , waterproof and thermal insulation performance, mainly used as building wall partition.

This kind of EPS Sandwich Wall Board is provided with comprehensive advantage that other wall panel can't compare with: solid, lightweight, thin body, high strength, impact resistance, strong hanging force, heat insulation, sound insulation, fire prevention, waterproof, easy cutting, can be arbitrary slot, without rendering coat, dry decoration, environmental protection. Achieving the purpose of saving energy, improving energy efficiency, Put the construction industry from traditional wet type construction to advanced dry type construction, thus realizing residential parts production industrialization, modernization of technical equipment, intensive production and legal application promotion, construction and equipment integration.

At the same time also can reduce wall occupying space, increase the rate of using residential space, reduce structure load, promote building aseismic ability and safety performance, reduce the comprehensive cost. This product can be widely used in all kinds of high, multi-story building as nonbearing wall, also can be sound insulation, fire partition wall. This product's application is a new breakthrough of the world's wall materials reform, this wall panel have tested by the relevant institutions and its strength, sound insulation, fire resistant, radioactive, water resistance and other performance indexes all reach or over the relevant national standards.
 EPS Wall Panel Making Production Line Machine



1.Main Feasture:
(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production. 

(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.

(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.

(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the

closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled

wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the

bad temperature control.

(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.

(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and

material conveying to silos.

(7)Most components are of world-famous brands, with reliable performance, stable quality, long service

 life and low maintenance cost.

(8)The machine can realize the primary and second expansion


Product Description
 Introduction of Hongfa EPS light weight wall panel production line
1. Materials of Hongfa Brand EPS Wall Panel
 Core Material: EPS( Foam polystyrene, Cement and fly ash.)
Board materials: Calcium Silicate Board.
2. Common Specifications of EPS cement wall sandwich panel
L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.
2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.


3. Applied range of light weight EPS wall panel
For interior and exterior wall partition on steel or concrete structure building, new construction or renovations. It can be widely applied to wall materials of various high and low buildings such as bank, office building, hospital, school, hotel, shopping mall, amusement, old house reconstruction, residence and workshop.
4. Advantages of Hongfa wall sandwich panel
A:Light weight
B:Excellent sound insulation
C:Heat Insulation
D:Waterproof Fire proof
E:Energy Efficient Environmental
F:Convenient construction
G:High Intensity without deformation.

Raw Materials Proportion:

Reference Workers needed:
(take capacity 200,000/yearly as example)
Raw materials, boiler and EPS expending:1
Mixing:1
Pouring:1
Pre insert silica panel:1
Demoulding:1
Total:                 

 
How is the EPS Light weight wall board produced?



Take an EPS Wall Board production line with annual capacity 200,000m2 for example (700 m2 / day):EPS Wall Panel Produced Machine

What is EPS wall panel?
 
EPS sandwich wall panel is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives.
 
Partition wall is the main part of building materials with huge market; more over, structure framework dominates the modern building structure, should have a huge application space. Considering environmental protection, the exit of clay brick from the city construction market is a inevitable trend, it will leave a huge market space for new wall materials.
 
So this new kind building material will quickly enter and dominate the construction market.

Hot Investment Project Light Weight EPS Wall Composition board Making Machine

Product Description
 (1). What is the main materials of the EPS Wall Panel Machine used to make the light weight sandwich wall board?
Main raw materials of EPS wall panel are: fly ash, slag, ceramic, portland cement and EPS foam particles, the production process is simple and low cost.
(2). The Concrete wall panel is suitable for modern building standard.
The overall world development trend of brick from clay to non-clay, from solid to hollow, from the small to large, from heavy to lightweight, from low intensity to high-strength, from high to low energy consumption. And the project is stressed to wall lightweight, high strength, thermal insulation, waste utilization, energy conservation and other functions.Therefore, the implementation of the project is imperative. The panel can meet the requirements of the modern building standard.
(3). Rich and Extensive Sources of Raw Materials for making EPS wall board.
The  production of wall materials must be rich and extensive sources of raw materials. The main raw materials of wall panel are industrial residues,fly ash, slag and EPS foam particles,which not only is recyclable and reducing pollution,but also uses inexpensive ordinary chemical raw materials.The above two kinds of sources of raw materials are abundant and extensive.
(4). Obvious Advantages of Industry Competition
EPS new green wall panel has five features:
(A) Lightweight: The raw materials used are Lightweight aggregates, fly ash,etc, non-reinforced concrete, gravel and other heavy feedstock. So it has the characteristics of lightweight, which is only 1/16 weight of the brick and concrete structure.It can significantly reduce the vertical load of the building structure and reduces building weight and project cost.
(B)Insulation Resistance: As this new wall panel is core of EPS insulation materials, which insulation performance is extremely advantageous and meet the building energy efficiency design standards, and rank first among similar products.
(C) Permeability Resistance: The bibulous rate of this new wall panel is only 3.3%,which has reached the international advanced level in the same industry.
(D) Fireproof performance: this kind of wall panel is non-burning, and according to the testing, it is reasonable fireproof materials, for the 90mm thickness wall panel, the fireproof performance can be more 3 hours.
(E) Soundproofing: As new wall panel is using EPS as core, it has good sound insulation and air aspiration, which is more than 40 db sound insulation.
(6). With low business risk for establishing the EPS sandwich wall board machinery.
 
(A) long-term stability advantages: Due to the limit of functional requirements of the restrictions and sources of raw materials needed to be broad and rich , but also by limiting the requirements of the human environment, the wall construction material development developers is relatively difficult.Once this kind of wall material is successfully developed and is recognized by the government and society,its competitive advantage will be relatively stable and long-term business in the market.
 
(B) Mechanization in production, so less workers but high output and stability.
(C) It is a comprehensive utilization of the industrial wastes project, and will get a great support from the Government.
Packaging & Shipping
Sea Worthy Package of Automatic Operation Vertical EPS Partion Wall Plate Making Machine
 
Our Services
 The three types of the cement wall board forming machine:
1: Horizontal type EPS wall board forming machine: high level of automatic operation,fewer workers required. 
 2: Automatic vertical type: automatic operation,high output,fewer workers required. 
C: Manual vertical type partition wall board making machine: Manual operation,the highest output amount the three types, but requires more workers. 
Company Information
GUANGXI HONGFA HEAVY Machinery Co.,LTD is a leading name in Concrete EPS Wall Panel Making Machine, Cement sandwich wall panel production line,AAC Block Production Line, Concrete Batching Plant, Fully Automatic Concrete Block Making Machine, Concrete Tile Making Machine, Concrete Pipe Making Machine, Non-Vibration Hydraulic Brick Making Machine, Mining Machinery AndP VC Pallets, Etc.
 
The machinery production facility established in 1990 is known for its quality, durability and efficiency. Building material machinery is the core business of HONGFA HONGFA Group.
 
It has four production factories with imported equipment and a large Research and Development centre. The plant area is 110,000m2 employing 1500 including 40 engineers and 150 assistant engineers. The annual sale is approx. 100Million USD covering more than 76 countries such as the United States, Russia, Australia, Brazil, India, Vietnam, Thailand, Sudan, North Korea, Angola, Bangladesh, the Five Central Asian Countries, etc.
 
If you are interest in this project, please feel free to contact us:

Yuki +8618378813711 
  Lightweight Gypsum Wall Panel/ Wall Board Making Machine
Light Weight Wall Board Machine EPS Cement Wall Board Making Machine With 50000m2 to 500000m2/year Output


What is Light Weight Wall Board/EPS Cement Wall Board:
EPS sandwich cement wall board is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives, and the panel formed by the EPS wall board making machine.

Product size: length 2440mm, width 610mm, thickness 60-180mm (size and thickness can be adjusted). The two surfaces of the new type composite sandwich board are composed of high strength water resistant calcium silicate board with good waterproof properties; good thermal insulation EPS bonding mortar as Core material; The product is of structural function , waterproof and thermal insulation performance, mainly used as building wall partition.

This kind of EPS Sandwich Wall Board is provided with comprehensive advantage that other wall panel can't compare with: solid, lightweight, thin body, high strength, impact resistance, strong hanging force, heat insulation, sound insulation, fire prevention, waterproof, easy cutting, can be arbitrary slot, without rendering coat, dry decoration, environmental protection. Achieving the purpose of saving energy, improving energy efficiency, Put the construction industry from traditional wet type construction to advanced dry type construction, thus realizing residential parts production industrialization, modernization of technical equipment, intensive production and legal application promotion, construction and equipment integration.

At the same time also can reduce wall occupying space, increase the rate of using residential space, reduce structure load, promote building aseismic ability and safety performance, reduce the comprehensive cost. This product can be widely used in all kinds of high, multi-story building as nonbearing wall, also can be sound insulation, fire partition wall. This product's application is a new breakthrough of the world's wall materials reform, this wall panel have tested by the relevant institutions and its strength, sound insulation, fire resistant, radioactive, water resistance and other performance indexes all reach or over the relevant national standards.
 EPS Wall Panel Making Production Line Machine



1.Main Feasture:
(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production. 

(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.

(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.

(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the

closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled

wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the

bad temperature control.

(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.

(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and

material conveying to silos.

(7)Most components are of world-famous brands, with reliable performance, stable quality, long service

 life and low maintenance cost.

(8)The machine can realize the primary and second expansion


Product Description
 Introduction of Hongfa EPS light weight wall panel production line
1. Materials of Hongfa Brand EPS Wall Panel
 Core Material: EPS( Foam polystyrene, Cement and fly ash.)
Board materials: Calcium Silicate Board.
2. Common Specifications of EPS cement wall sandwich panel
L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.
2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.


3. Applied range of light weight EPS wall panel
For interior and exterior wall partition on steel or concrete structure building, new construction or renovations. It can be widely applied to wall materials of various high and low buildings such as bank, office building, hospital, school, hotel, shopping mall, amusement, old house reconstruction, residence and workshop.
4. Advantages of Hongfa wall sandwich panel
A:Light weight
B:Excellent sound insulation
C:Heat Insulation
D:Waterproof Fire proof
E:Energy Efficient Environmental
F:Convenient construction
G:High Intensity without deformation.

Raw Materials Proportion:

Reference Workers needed:
(take capacity 200,000/yearly as example)
Raw materials, boiler and EPS expending:1
Mixing:1
Pouring:1
Pre insert silica panel:1
Demoulding:1
Total:                 

 
How is the EPS Light weight wall board produced?



Take an EPS Wall Board production line with annual capacity 200,000m2 for example (700 m2 / day):EPS Wall Panel Produced Machine

What is EPS wall panel?
 
EPS sandwich wall panel is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives.
 
Partition wall is the main part of building materials with huge market; more over, structure framework dominates the modern building structure, should have a huge application space. Considering environmental protection, the exit of clay brick from the city construction market is a inevitable trend, it will leave a huge market space for new wall materials.
 
So this new kind building material will quickly enter and dominate the construction market.

Hot Investment Project Light Weight EPS Wall Composition board Making Machine

Product Description
 (1). What is the main materials of the EPS Wall Panel Machine used to make the light weight sandwich wall board?
Main raw materials of EPS wall panel are: fly ash, slag, ceramic, portland cement and EPS foam particles, the production process is simple and low cost.
(2). The Concrete wall panel is suitable for modern building standard.
The overall world development trend of brick from clay to non-clay, from solid to hollow, from the small to large, from heavy to lightweight, from low intensity to high-strength, from high to low energy consumption. And the project is stressed to wall lightweight, high strength, thermal insulation, waste utilization, energy conservation and other functions.Therefore, the implementation of the project is imperative. The panel can meet the requirements of the modern building standard.
(3). Rich and Extensive Sources of Raw Materials for making EPS wall board.
The  production of wall materials must be rich and extensive sources of raw materials. The main raw materials of wall panel are industrial residues,fly ash, slag and EPS foam particles,which not only is recyclable and reducing pollution,but also uses inexpensive ordinary chemical raw materials.The above two kinds of sources of raw materials are abundant and extensive.
(4). Obvious Advantages of Industry Competition
EPS new green wall panel has five features:
(A) Lightweight: The raw materials used are Lightweight aggregates, fly ash,etc, non-reinforced concrete, gravel and other heavy feedstock. So it has the characteristics of lightweight, which is only 1/16 weight of the brick and concrete structure.It can significantly reduce the vertical load of the building structure and reduces building weight and project cost.
(B)Insulation Resistance: As this new wall panel is core of EPS insulation materials, which insulation performance is extremely advantageous and meet the building energy efficiency design standards, and rank first among similar products.
(C) Permeability Resistance: The bibulous rate of this new wall panel is only 3.3%,which has reached the international advanced level in the same industry.
(D) Fireproof performance: this kind of wall panel is non-burning, and according to the testing, it is reasonable fireproof materials, for the 90mm thickness wall panel, the fireproof performance can be more 3 hours.
(E) Soundproofing: As new wall panel is using EPS as core, it has good sound insulation and air aspiration, which is more than 40 db sound insulation.
(6). With low business risk for establishing the EPS sandwich wall board machinery.
 
(A) long-term stability advantages: Due to the limit of functional requirements of the restrictions and sources of raw materials needed to be broad and rich , but also by limiting the requirements of the human environment, the wall construction material development developers is relatively difficult.Once this kind of wall material is successfully developed and is recognized by the government and society,its competitive advantage will be relatively stable and long-term business in the market.
 
(B) Mechanization in production, so less workers but high output and stability.
(C) It is a comprehensive utilization of the industrial wastes project, and will get a great support from the Government.
Packaging & Shipping
Sea Worthy Package of Automatic Operation Vertical EPS Partion Wall Plate Making Machine
 
Our Services
 The three types of the cement wall board forming machine:
1: Horizontal type EPS wall board forming machine: high level of automatic operation,fewer workers required. 
 2: Automatic vertical type: automatic operation,high output,fewer workers required. 
C: Manual vertical type partition wall board making machine: Manual operation,the highest output amount the three types, but requires more workers. 
Company Information
GUANGXI HONGFA HEAVY Machinery Co.,LTD is a leading name in Concrete EPS Wall Panel Making Machine, Cement sandwich wall panel production line,AAC Block Production Line, Concrete Batching Plant, Fully Automatic Concrete Block Making Machine, Concrete Tile Making Machine, Concrete Pipe Making Machine, Non-Vibration Hydraulic Brick Making Machine, Mining Machinery AndP VC Pallets, Etc.
 
The machinery production facility established in 1990 is known for its quality, durability and efficiency. Building material machinery is the core business of HONGFA HONGFA Group.
 
It has four production factories with imported equipment and a large Research and Development centre. The plant area is 110,000m2 employing 1500 including 40 engineers and 150 assistant engineers. The annual sale is approx. 100Million USD covering more than 76 countries such as the United States, Russia, Australia, Brazil, India, Vietnam, Thailand, Sudan, North Korea, Angola, Bangladesh, the Five Central Asian Countries, etc.
 
If you are interest in this project, please feel free to contact us:

Yuki +8618378813711 
 

Saw Blade

Circular Saw Blade,Saw Blade,Alloy Saw Blade,High Speed Steel Saw Blade

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.chittakcutting.com