Model NO.: WQ
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Single Case
Mounting Height: Submersible
Impeller: Closed
Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump, Submersible Pump
Material 1: High Chrome
Material 2: Cast Iron
Material 3: Stainless Steel
Application 1: Dredging
Application 2: Water Treatment
Application 3: Mining
Application 4: Metallurgy
Application 5: Sewage Drain
Application 6: Irrigation
Color: as Customer Requirement
Trademark: Depon
Transport Package: Ply Wooden Case
Specification: DN50mm-DN600mm
Origin: China
HS Code: 8413810090
Model NO.: WQ
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Single Case
Mounting Height: Submersible
Impeller: Closed
Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump, Submersible Pump
Material 1: High Chrome
Material 2: Cast Iron
Material 3: Stainless Steel
Application 1: Dredging
Application 2: Water Treatment
Application 3: Mining
Application 4: Metallurgy
Application 5: Sewage Drain
Application 6: Irrigation
Color: as Customer Requirement
Trademark: Depon
Transport Package: Ply Wooden Case
Specification: DN50mm-DN600mm
Origin: China
HS Code: 8413810090
Submersible Sewage PumpWQÂ series submersible sewage pump is mainly used for municipal works, industrial buildings, hotels, hospitals, civil air defence, mines, etc. Trades to drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various long fabrics.
Characteristics:
Â
| Type | Centrifugal | Submersible | Â | Â |
| Medium | Sewage | Waste water | Rain water | Living water |
| Flowrate | Min.:10m3/h | Max.:6000m3/h | Â | Â |
| Head | Min.:7m | Max.:62m | Â | Â |
Features:
Â
| Materials | ||
| Description | Standard Material | Material Options |
| Shaft | 420 Stainless Steel | Â |
| Pump Casing | Cast Iron | SS316/ Duplex |
| Impeller | Cast Iron | SS316/ Duplex |
| Neck Ring | Cast Iron | SS316/ Duplex |
| Motor Water Jacket | Mild Steel | SS316 |
| Motor Mechanical Seal | SS304 | Â |
| Wet End Mechanical Seal | SS304 | Â |
| Motor Body | Cast Iron | SS316 |
| Oil Housing | Cast Iron | SS316 |
Conditions of use
1. Medium temperature should not be over 40degree, the density no larger than 1200kg/m, and the PH value within5-9.
2. During running, the pump must not be lower than the lowest liquid level.
3. The maximum diameter of the solid grain going through the pump has not be larger than 50% of the pump outlet.
Structures Description
Â
| Bearing | Imported and Local market brand |
| Cooling | Built-in cooling system |
| Motor | F class insulation, max. working temperature 155degree |
| Seal | Mechanical seal |
| Oil chamber | Oil can lubricate and cool the mechanical seal |
| Impeller | Optimized design |
| Pump casing | CAD/CAM design |
| Float switch | warning signal |
WQ Pump Performance
Â
| Item | Type | Outlet diameter (mm) | Capacity (m3/h) | Head (m) | Speed (r/min) | Power (kw) | Efficiency (%) |
| 1 | 50WQ15-8-0.75 | 50 | 10-20 | 7-10 | 2825 | 0.75 | 52 |
| 2 | 50WQ15-16-1.5 | 50 | 10-20 | 10-18 | 2840 | 1.5 | 52 |
| 3 | 65WQ30-10-2.2 | 65 | 20-45 | 8-12 | 1420 | 2.2 | 62 |
| 4 | 65WQ30-35-7.5 | 65 | 20-45 | 30-37 | 1440 | 7.5 | 50 |
| 5 | 80WQ50-35-11 | 80 | 40-75 | 27-40 | 2900 | 11 | 55 |
| 6 | 80WQ50-40-15 | 80 | 40-75 | 37-42 | 2900 | 15 | 52 |
| 7 | 100WQ80-36-18.5 | 100 | 65-120 | 30-40 | 2900 | 18.5 | 55 |
| 8 | 100WQ80-40-22 | 100 | 65-120 | 35-45 | 2900 | 22 | 55 |
| 9 | 150WQ150-40-30 | 150 | 100-200 | 33-42 | 1470 | 30 | 65 |
| 10 | 200WQ400-27-45 | 200 | 250-500 | 24-35 | 1480 | 45 | 74 |
| 11 | 250WQ500-25-55 | 250 | 400-700 | 16-22 | 980 | 55 | 74 |
| 12 | 300WQ1000-20-75 | 300 | 800-1400 | 15-23 | 990 | 75 | 82 |
| 13 | 350WQ1100-25-110 | 350 | 900-1500 | 18-30 | 980 | 110 | 76 |
| 14 | 350WQ1500-40-250 | 350 | 1200-2000 | 33-42 | 740 | 250 | 80 |
| 15 | 400WQ2000-36-280 | 400 | 1500-2800 | 27-43 | 745 | 280 | 80 |
| 16 | 500WQ3000-11-132 | 500 | 2000-4000 | 8-14 | 745 | 132 | 75 |
| 17 | 600WQ4000-12-200 | 600 | 3000-6000 | 7-16 | 745 | 200 | 72 |
*The above pump performance for reference only, details please contact us!
FAQ
1. What is your product range?
A: centrifugal pump. Centrifugal pump includes slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, self-priming pump and diesel engine pump.
2. What's your MOQ, payment term and lead time?
A: MOQ for centrifugal pump is 1set, MOQ for conveyor belt is 100cbm.
Payment Term: T/T, L/C, Western Union, Paypal and Trade Assurance.
Lead time: in general 7Â working days for slurry pump, 15working days for water pump.
3. What information should I let you know if I want to get a quotation:
A: Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also provide the pump model you are using now, price will be calculated as per the pump model, if not, we will recommend relevant product for reference.
4. If I put a bigger motor on my pump, will it pump more?
A: No. The amount of water and the pressure (head) that a centrifugal pump process is related to the rotational speed, impeller diameter and size of the impeller vanes.
5. Do you impact the finished product?
A: Yes, each batch of production and finished product will be quality checked strickly before delivering, testing report or video can be sent to clients for reference.
6. How do you ship the finished product?
A: By sea, By air, By international express.
Inquiry of Pump
1. Head: _____meter
2. Capacity: _____m3/h
3. Liquid media: ______
4. PH: _____
5. Concentration: ____%
6. Temperature: _____degree
7. Specific density; ______kg/m3
Contract Us:
Shirley She
Tel: +86-312-6795175
Fax: +86-312-3085383
Mob: +86-13932278621
Â
More Pumps, Please Click Here:
http://deponpump.en.made-in-china.com/ Submersible Sewage Pump
WQÂ series submersible sewage pump is mainly used for municipal works, industrial buildings, hotels, hospitals, civil air defence, mines, etc. Trades to drain off the sewage, waste water, rainwater and living water in cities containing solid grains and various long fabrics.
Characteristics:
Â
| Type | Centrifugal | Submersible | Â | Â |
| Medium | Sewage | Waste water | Rain water | Living water |
| Flowrate | Min.:10m3/h | Max.:6000m3/h | Â | Â |
| Head | Min.:7m | Max.:62m | Â | Â |
Features:
Â
| Materials | ||
| Description | Standard Material | Material Options |
| Shaft | 420 Stainless Steel | Â |
| Pump Casing | Cast Iron | SS316/ Duplex |
| Impeller | Cast Iron | SS316/ Duplex |
| Neck Ring | Cast Iron | SS316/ Duplex |
| Motor Water Jacket | Mild Steel | SS316 |
| Motor Mechanical Seal | SS304 | Â |
| Wet End Mechanical Seal | SS304 | Â |
| Motor Body | Cast Iron | SS316 |
| Oil Housing | Cast Iron | SS316 |
Conditions of use
1. Medium temperature should not be over 40degree, the density no larger than 1200kg/m, and the PH value within5-9.
2. During running, the pump must not be lower than the lowest liquid level.
3. The maximum diameter of the solid grain going through the pump has not be larger than 50% of the pump outlet.
Structures Description
Â
| Bearing | Imported and Local market brand |
| Cooling | Built-in cooling system |
| Motor | F class insulation, max. working temperature 155degree |
| Seal | Mechanical seal |
| Oil chamber | Oil can lubricate and cool the mechanical seal |
| Impeller | Optimized design |
| Pump casing | CAD/CAM design |
| Float switch | warning signal |
WQ Pump Performance
Â
| Item | Type | Outlet diameter (mm) | Capacity (m3/h) | Head (m) | Speed (r/min) | Power (kw) | Efficiency (%) |
| 1 | 50WQ15-8-0.75 | 50 | 10-20 | 7-10 | 2825 | 0.75 | 52 |
| 2 | 50WQ15-16-1.5 | 50 | 10-20 | 10-18 | 2840 | 1.5 | 52 |
| 3 | 65WQ30-10-2.2 | 65 | 20-45 | 8-12 | 1420 | 2.2 | 62 |
| 4 | 65WQ30-35-7.5 | 65 | 20-45 | 30-37 | 1440 | 7.5 | 50 |
| 5 | 80WQ50-35-11 | 80 | 40-75 | 27-40 | 2900 | 11 | 55 |
| 6 | 80WQ50-40-15 | 80 | 40-75 | 37-42 | 2900 | 15 | 52 |
| 7 | 100WQ80-36-18.5 | 100 | 65-120 | 30-40 | 2900 | 18.5 | 55 |
| 8 | 100WQ80-40-22 | 100 | 65-120 | 35-45 | 2900 | 22 | 55 |
| 9 | 150WQ150-40-30 | 150 | 100-200 | 33-42 | 1470 | 30 | 65 |
| 10 | 200WQ400-27-45 | 200 | 250-500 | 24-35 | 1480 | 45 | 74 |
| 11 | 250WQ500-25-55 | 250 | 400-700 | 16-22 | 980 | 55 | 74 |
| 12 | 300WQ1000-20-75 | 300 | 800-1400 | 15-23 | 990 | 75 | 82 |
| 13 | 350WQ1100-25-110 | 350 | 900-1500 | 18-30 | 980 | 110 | 76 |
| 14 | 350WQ1500-40-250 | 350 | 1200-2000 | 33-42 | 740 | 250 | 80 |
| 15 | 400WQ2000-36-280 | 400 | 1500-2800 | 27-43 | 745 | 280 | 80 |
| 16 | 500WQ3000-11-132 | 500 | 2000-4000 | 8-14 | 745 | 132 | 75 |
| 17 | 600WQ4000-12-200 | 600 | 3000-6000 | 7-16 | 745 | 200 | 72 |
*The above pump performance for reference only, details please contact us!
FAQ
1. What is your product range?
A: centrifugal pump. Centrifugal pump includes slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, self-priming pump and diesel engine pump.
2. What's your MOQ, payment term and lead time?
A: MOQ for centrifugal pump is 1set, MOQ for conveyor belt is 100cbm.
Payment Term: T/T, L/C, Western Union, Paypal and Trade Assurance.
Lead time: in general 7Â working days for slurry pump, 15working days for water pump.
3. What information should I let you know if I want to get a quotation:
A: Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also provide the pump model you are using now, price will be calculated as per the pump model, if not, we will recommend relevant product for reference.
4. If I put a bigger motor on my pump, will it pump more?
A: No. The amount of water and the pressure (head) that a centrifugal pump process is related to the rotational speed, impeller diameter and size of the impeller vanes.
5. Do you impact the finished product?
A: Yes, each batch of production and finished product will be quality checked strickly before delivering, testing report or video can be sent to clients for reference.
6. How do you ship the finished product?
A: By sea, By air, By international express.
Inquiry of Pump
1. Head: _____meter
2. Capacity: _____m3/h
3. Liquid media: ______
4. PH: _____
5. Concentration: ____%
6. Temperature: _____degree
7. Specific density; ______kg/m3
Contract Us:
Shirley She
Tel: +86-312-6795175
Fax: +86-312-3085383
Mob: +86-13932278621
Â
More Pumps, Please Click Here:
http://deponpump.en.made-in-china.com/
Die casting dies, also known as molds or tooling, are essential components used in the custom die casting process. Die casting is a manufacturing process in which molten metal is injected into a mold cavity under high pressure, resulting in the formation of complex and precise metal parts.
Die casting dies are typically made from high-quality tool steel or other durable materials that can withstand the high temperatures and pressures involved in the die casting process. They are designed to have multiple cavities or impressions that determine the shape and features of the final casted part.
die casting die,custom die casting,die casting dies
Shenzhen Kangneng Fusheng Die Casting Products Co., Ltd. , https://www.kesdiecast.com