We have caught up with the most beautiful era of LED industry development, and it is also the worst era. Whether it is the past few years or the future, the LED lighting industry, as one of the strategic emerging industries in China's 12th Five-Year Plan, has achieved a leap-forward development with great expectations, and the potential of the application market is growing. Faced with a rare historical opportunity in the past century, many companies have entered the field of LED lighting, but many people are prone to embarrassment, and the various problems that follow have constrained the healthy development of the LED industry. The lack of standardized and standardized optical components and luminaire standards, the unbalanced development of the company's existing equipment, work base and technology level have resulted in a wide variety of products, different performances and poor interchangeability in the LED lighting application market. The situation has brought severe challenges to the development of the entire industry. The heroes of the times, the brave wins - the LED drive power technology revolution tumbling in the LED industry development opportunities and challenges coexist in the wave of the era, only the brave to dare to force the cable mania, and bravely move forward. Foshan Lijue Optoelectronics Technology Co., Ltd. is a high-tech enterprise specializing in R&D, design, manufacture and after-sales service of LED drive power. With the domestic and international market's demands for energy-saving and environmental protection and intelligent home lighting, Lijue Power has developed a series of high-power factor stroboscopic power supplies that comply with 3C and CE certified power supplies and 2.4G dimming color temperature. Intelligent remote power supply. The high power factor stroboscopic power supply led lamp strobe is generally too large, so that the LED light flashes. This kind of blinking human eye can't be seen. You need to take a photo with a digital camera or mobile phone to see the flicker. LED lamp power supply PF value is low, there will be no stroboscopic (except for RC power supply), but the power supply with low PF value is very polluting to the power grid. LED power supply greater than 10W generally has requirements for PF value. Due to cost reasons, Most of the high PF power supplies now have strobes. Generally, the PF value of the switching power supply without PF correction is about 0.6, and the power supply PF value of the PF correction circuit is 0.9 or more. Basically, the power factor can measure the degree to which the power is effectively utilized. The higher the PF value, the higher the utilization rate of the power grid. It also means more energy-saving! In indoor lighting, in order to reduce light pollution and improve light quality, it is recommended to use LED lamps without stroboscopic. Especially for the lighting of photography and shooting places, the lighting effect without stroboscopic light can only promote the photography work without interference. For high power factor no stroboscopic, combined with different customer needs, Lijue Power has introduced an isolated 7W-50W series power supply to meet your unlimited requirements for bright quality. 2.4G dimming color temperature intelligent remote control power supply uses 2.4G high-frequency wireless, micro-touch button remote control, with low power consumption, long transmission distance, high air communication rate, stronger anti-interference, higher stability, lamp body The response is very consistent and so on; the remote control is stylish and beautiful, and the function is simple and practical; the most advanced PWM (pulse width modulation) control technology is adopted; the radio transmission frequency is 2400-2483.5MHz (2.4G), universal; RF The RF signal, the remote control and the receiving end (LED light) have no physical obstruction between each other. When using, the remote control does not need to face the remote control LED light, and the remote control distance is 20~30 meters. It has the functions of dimming, color temperature, night light mode, etc. In the remote control range, one remote control can control countless LED lights, and the synchronization and consistency are very good. Different lights are divided into different groups, up to 4 groups, freely grouped, controlled at the same time or separately controlled. After the system matching and grouping of the controller and remote controller are completed, wireless control of various functions can be realized. If you want to change the previous group, you can clear the code and match it.
ThermicTransfer bar plate Oil Cooler through 16 years of market tests, after 280 times upgrade improved and now is mature global standard series products, Can be used in any brand of concrete mixer truck and Engineering machinery.
Optional different heat transfer model
Optional different oil tank size (13 L- 36 L)
Optional different types of motor (DC12/24v AC110v/230v/380)
Optional different temperature sensor (77℉ - 176℉)
Optional different filtration precision filter
Optional long service life of the motor (up to 40000 hours)
Concrete Mixer Truck Oil Cooler
Concrete Mixer Truck Oil Cooler,Oil Cooler,Hydraulic Oil Cooler,Oil Cooler Heat Exchanger
Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermictransfer.com