Equipment maintenance technology:
(1) Adjust the amount of slurry. Adjust the opening degree of the sand door by the tie rod to ensure the balance of the slurry and avoid the deposition of coarse mortar in the studio.
(2) Adjust the liquid level. Adjust the level adjuster to adjust the liquid level to ensure that the scraper effectively scrapes the foam and prevents the slurry from overflowing into the foam tank.
(3) Adjust the amount of air intake. According to the amount of pulp, the degree of wear of the impeller and the cover plate, the amount of mineral entering the impeller is adjusted to adjust the amount of air intake.
(4) Check the air intake. The air intake amount has a great influence on the performance index of the flotation machine, and the air intake amount and the wear of the impeller and the cover plate are reduced. Therefore, the anemometer often checks the air intake amount of the flotation machine in production.
(5) Replace consumables. Replace consumables in a timely manner. Axial clearance and assembly quality are guaranteed when replacing the impeller and cover. Method for repairing parts of centrifugal oil pump Maintenance method of shearing machine Dry type transformer cooling fan Installation and maintenance of common faults and solutions for liquefied gas vaporizers Differentiation methods for silicone products and rubber products Gear oil pump maintenance
Graphite Molds,High Purity Graphite,Medium Grain Graphite,High Strength Graphite Block
CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.kycarbon.com