Calcium citrate dryer assists drying of free moisture

Calcium citrate is hardly soluble in water and is slightly hygroscopic. Only when heated to l00 °C will gradually lose crystal water. Therefore, calcium citrate needs to be dried using a drying device during the drying process.

According to the industry, the working principle of the calcium citrate drying equipment is that the hot air enters the stirring and pulverizing drying chamber from the bottom of the calcium citrate dryer at the appropriate spraying speed by the inlet pipe, and the calcium citrate is strongly sheared and blown. Rotation, so that calcium citrate is subjected to centrifugation, shearing, collision, and friction to be micronized, which enhances mass transfer heat transfer.

At the same time, at the bottom of the calcium citrate dryer, the larger and drier pellets are mechanically broken under the action of the agitator, and the particles with lower moisture content and smaller particle size are entrained by the swirling gas flow, and further lemons during the ascending process. Calcium acid is dried. Since the gas-solid two phases are rotating, the solid phase inertia is larger than the gas phase, and the relative velocity between the solid and gas phases is large, and the mass transfer heat transfer between the two phases is strengthened, so the drying strength of the calcium citrate dryer is relatively high.

At present, the competition in the equipment market of calcium citrate dryers is becoming more and more fierce. Many manufacturers of drying equipment are fighting price wars. Some manufacturers choose to speak with quality, starting from the drying effect and building products that customers are more satisfied with, so as to gain a firm foothold in the market. .

For example, Changzhou Jianda has developed a special dryer for calcium citrate. After drying, the moisture content is less than 1%. The good effect has won praises from many customers. It is understood that this equipment is upgraded and modified based on the technology of flash dryer.

The industry expects that with the rapid development of the domestic economy, people's demand for health products continues to increase. In this context, the calcium citrate industry will usher in a larger market, which is a good development opportunity for related processing and drying equipment companies.

Al-alloy Lift Platform

The AL-alloy lift platform also called Al-Alloy Mast Hydraulic Lift, it can be Single mast aluminum Aerial Work Platform, double mast hydraulic lift

Our hydraumatic lifting are designed for aerial access applications, from the minimum 1.5 meters reach height up to 16 meters reach height available, with different sizes and heights, these scissor lifts enable you to reach the most hard-to-access overhead spaces.

The manually propelled Hydraumatic lifting can do many jobs such as, steel structural warehouse construction, building maintenance, lamp repairing, Street Lighting Repair, Painting, Construction etc.

We offer many different power sources for our Hydraumatic lifting, including but not limited to 220v single phase, 380v three phase, 110v single phase, or even a 24V DC battery powered model.

Features:

Emergency stop button

Charge lamp

Double Controller Operation

Emergency descent PLB

Limit switch

Level indicator

Overload limit

Maximum working height: 8 m, 10 m and 12 m three kinds of models for your choice

Small size (1.42 m * 0.84 m) ensures work in a smaller space

Precise level display device ensures the accurate and reliable leveling operation.

Single mast aluminum work platform

Double mast aluminum work platform

More for choice:

Aluminum Alloy Lift Platform

Aluminum Alloy Lift Platform,Aluminum Alloy Lifting Table,Aluminum Alloy Lifts,Man Lift

Jiangxi Mide Industrial Co., Ltd. , https://www.midecrane.com