According to US media reports on September 6, the catamaran named "Poseidon" is like a spider, with a long buoy on each side and a pointed tip. The pontoon is connected by two sets of arched brackets, the center of which is a high cockpit and the passenger cabin behind it. They are all suspended high above the sea and do not come into contact with the sea when traveling or mooring. Although the US Coast Guard has been told in advance that there will be a strange "ship" appearing, when the "Poseidon" approached New York, they also dispatched a small patrol boat for inspection.
The spider-like "Poseidon" is a prototype of the Wave Adaptive Modular Vessels (WAM-V). The unique shape of the Poseidon allows it to adapt to wave-like movements. That is to say, its hull is able to conform to the undulating water surface, rather than pushing, slamming and piercing the waves. The titanium alloy spring mounted in the bracket also helps absorb the vibration generated when the wave breaks forward. Therefore, even in the larger storms, the Poseidon passengers will not feel thrown into the air for a while, and then thrown back into the water. Since the "Poseidon" has few underwater parts and the draught is very shallow, it can also travel freely in shallow waters.
The modular design is also a major feature of the "Poseidon". From the exploded view, all its components, including the float, bracket, cockpit, and passenger compartment, are easy to transport and store. They can be easily assembled. It takes only one hour to assemble the body with a length of 31 meters. , "Sea Spider" with a width of 16 meters. This design also means that any component of the Poseidon can be replaced as needed. For example, a tail mounted propeller can be replaced with a jet propeller. Gasoline engines can also be converted to diesel engines. There are currently 3 designs in the passenger cabin, including 2 seats, 6 seats and 12 seats. When there are a large number of passengers, the cabin can be floated to the surface.
Although the Poseidon is very lightweight, it has the ability to travel across the ocean and can travel 8,000 kilometers with only 2,000 gallons of fuel, with a top speed of 55.5 kilometers per hour. This futuristic ship has the advantages of long range, low fuel consumption, low cost, easy loading and unloading, and low pollution. Therefore, it has broad application prospects in military, civil, marine rescue and scientific investigations.
Plastic Injection Insert Molding
1. The combination of the easiness of molding and bending of resin and the rigidity, strength and heat resistance of metal can make complex and sophisticated metal-plastic integrated products sturdily.
2. In particular, the combination of the insulation of resin and the electrical properties of metal can meet the basic functions of electrical products.
3. The pre-forming combination of multiple inserts makes the post-engineering of product unit combination more reasonable.
4. Insert products are not limited to metal, but also cloth, paper, wire, plastic, glass, wood, wire ring, electrical parts and so on.
5. For rigid parts and flexible parts on rubber sealing pad, the complex operation of arranging sealing ring can be eliminated after the integrated products are made by injection molding on the matrix, which makes the automatic combination of the following process easier.
6. Because it is the fusion of molten material and metal insert, compared with the pressing molding method, the metal insert gap can be designed to be narrower, and the reliability of composite product molding is higher.
7. Suitable resin and molding conditions may be used for sealing and fixation of susceptible products such as glass, coils, electrical parts, etc.
8. Inserts can also be completely sealed into the resin by selecting the appropriate mold construction.
9. After the insert is molded, it can also be made into a product with hollow grooves along with the core hole.
10. The combination of vertical injection molding machine and manipulator, the whole row device of insert products, etc., the insert forming engineering can be mostly automated production.
Plastic Injection Insert Molding,Washing Machine Plastic Injection Moulds,Plastic Injection Molding,Plastic Injection Molding Machine
Suzhou Dongye Precision Molding Co.,Ltd. , https://www.dongyeinjectionmolding.com