Air purifier energy saving point

Air pollution has become the new darling nowadays when air pollution affects the health of people. If an air purifier is used as an environmentally friendly product, it will become environmentally unfriendly as it consumes large amounts of energy. Therefore, while enjoying the fresh air every day, you must also pay attention to energy conservation. Take note of the following points:

1, choose the right power

Choose the right power based on the area used. High power and small area, long hours of work will consume a lot of power. Households within 100 square meters choose to use products with a power of 30 square meters more reasonable. This power has reached the requirements of household air purification. For example, the Australian Lance K01 negative ion air purifier is suitable for 30 square meters, the power is only 43W, and the energy consumption of a lamp is almost the same.

2, open according to air conditions

The formaldehyde in the room should be removed every day. Formaldehyde is volatile. The newly-renovated house or new furniture contains certain formaldehyde. It pollutes the air every day and needs daily purification. Haze or MP2.5 air does not occur every day and can be selectively turned on. When the air quality is good, it does not need to be turned on, which can save electricity.

3, regular cleaning and replacement filter

After a period of use, check the degree of dirt on the dust collector and clean it with dust. When the filter replacement indicator is on, the corresponding filter should be replaced. Filter plugging greatly reduces the degree of cleanliness. Even if it takes longer to filter the same space, it will not only waste electricity, but also cause secondary pollution.

4, swing place to be ventilated

There should be no obstructions within 1 meter of the air purifier. The air cannot be circulated and the purification range is too small. If you want to achieve the maximum purification effect, you can place it in a place where people's activities are concentrated to expedite the purification of air at the location.

5, Selective use of different features

Some products contain a humidifying function. For example, the humidifier function of Australia's K02 negative ion air purifier can turn on the humidifying function in the dry winter to atomize the air and make people feel more comfortable. However, in the summer when there are many rainy days, when the humidity is high, do not turn on this function and it will only increase the consumption of electricity.

6, people leave to shut down

Even if it is in addition to formaldehyde, it must be turned off when the person leaves, open the windows to allow the air to flow, on the one hand can naturally remove formaldehyde, the other can save energy.

7, used in closed or semi-closed

Purification is a cyclical filtration of the air in the local space. In the case of window opening, the air flow is large, and the purified air is polluted by the new air, and the air cannot be purified effectively.

8, power off when not in use

Whether it is an air purifier or other home appliances, it is necessary to perform a break when it is not used for a long time. The appliances in standby will consume a certain amount of power. After a 32-inch LCD color TV is turned off by remote control, the power consumption will be 0.048 degrees on one standby day. Every year in China, this kind of standby wastes a lot of electricity. The long-term consumption of a large number of electric appliances is inestimable.