I believe that the term “competitiveness†is no stranger to modern industrial metropolises, facing the modernization of the city in urban construction, facing the ever-changing modern industrial products, facing the rapid development of the information industry, and facing the increasing industries of modern industry. Competition and competitiveness have increasingly determined whether the industry can successfully survive in the competition of modern industry. Competitiveness has become the industry's standard in modern industry. Therefore, as the king of the industry, the mold industry, it is imperative to improve competitiveness. The following discussion is about 10 aspects of the mold industry competitiveness, are based on the development of China's mold industry by the mold industry experts, and hope It helps your mold industry.
View 1: The training of talents in the mold industry must pay attention to taking the talented road of the “industry-university-research, government-enterprise-school†alliance. The combination of production, education and research will help create results and industrialize them as soon as possible. In order to improve the competitiveness of the mold industry, in the modern industrial development has always maintained a strong vitality, talent cultivation can not be ignored, because the quality of talent is the main force of the mold industry competitiveness, mold industry is a concrete manifestation of vitality.
Point two: The main theme of the competitiveness of the mold industry is structural adjustment. According to the Guangzhou Plastic Mold Factory, the mold industry in China should vigorously develop high-tech molds mainly represented by large-scale, precision, complex and long-life molds to develop high-end products. Doing special work, doing fine work, doing fine work, doing special work and making new work is the direction of development. In internal management, deepening organizational structure adjustment, intensifying the transformation of production organization methods, implementing process reengineering, further changing the extensive state, strengthening management and control, improving and perfecting the management system that meets “professional, refined, and strong†and improving production, Technology, quality and other basic management levels, and promote the continuous improvement of the quality of the company's economic operation. This is because China is currently a major tool manufacturing country in the world, but China's advanced level of mold technology is still a big gap compared with the developed countries' industries.
Point Three: The size of the mold industry must expand its effect. This is because the benefits derived from the economies of scale of molds are advantageous to the production of mold clusters and should be encouraged to develop. While the specialization of “small and fine specialization†continues to develop, the scale effect naturally receives attention. In addition to making the company bigger and bigger and making economies of scale produce benefits, we must also increase the scale effect, including the development of "mold parks," "mold cities," and "mold gathering production bases." If the development of an industry wants to be stronger and more development space and development potential, it must expand the scale of the industry.
Point 4: The key to the development of the competitiveness of the mold industry is to upgrade the sense of innovation. The sense of innovation is the soul of mold enterprises and the foundation of the mold industry. We should start from the aspects of philosophy, technology, management, and systems. Upgrade should include many aspects such as product level, technical level, management level, profit level and improvement of labor productivity. Here we must pay attention to: Deal with the relationship between innovation and introduction, we must dare to explore, be creative, do not blindly introduce, do not blindly follow the trend in the development of the mold industry, others need to do so, but does not mean that the same for your mold business, Should choose timely match with their own mold industry to match the innovation path to go forward, otherwise you can only take a detour, and miss the opportunity.
Point five: The core industrial chain of the mold industry should be developed. It should combine the industrial chain of the mold itself with the upstream and downstream related industrial chains to form a larger industrial chain, build a mold production base with higher level and stronger capabilities, and gradually form a regional comprehensive supporting mold through market operation. The production chain and the larger industrial chain, including public service platforms and production services, will strengthen the core industrial chain of the mold industry. This is a very promising approach for the mold industry. It is an imposing and powerful force that can withstand the forces of modern industry.
Point 6: The mold industry must create new growth points in the new market. Guangzhou Plastic Molds believes that China's mold enterprises must not only raise the awareness of competition in the mold industry in the current market, in order to further strengthen their competitiveness, they should also develop new mold markets and create new growth points in new markets. We should not conduct vicious competition in the current only mold market. This is extremely unfavorable to the development of the mold industry. The development of China's mold industry must follow the path of sustainable development, and it must be oriented toward internationalization and development of precision molds. A good competitive environment is the strongest evidence for the development of the mold industry.
Point of View 7: The cost of the mold industry should be controlled reasonably and effectively. As China’s mold companies are facing the pressure of rising prices of raw materials and energy in the upstream and mold prices not rising, if companies cannot fundamentally solve the problem of cost control, companies will risk being eliminated. To this end, not only must the pressure of rising costs from the upstream be resolved through its own scientific and technological advancement and optimization and upgrading, but also relying on the informatization means and the joint efforts of all employees to carefully calculate all details in order to control all costs reasonably and effectively. The issue of cost is always a major issue for the development of the enterprise, and cost saving is an enterprise development that should be promoted.
Point of View 8: The marketing of the mold industry should be a combination of e-commerce and online marketing. Since e-commerce, IoT, and cloud technologies are currently viewed from the point of view of modern industry marketing, not only industry alliances can be formed, but also mold enterprises can establish more extensive and immediate contacts with customers at home and abroad, which will not only benefit each other's business. Communication with technology also facilitates attempts to launch virtual companies. The marketing feature of the E era is the rapid development of information technology. The development of the mold industry in modern industry should conform to this development trend, and the marketing of the mold industry should take the marketing path of combining e-commerce and online marketing. This is highly advanced.
Perspective 9: The operation of the mold industry should be diversified. As the scale of the global manufacturing shift continues to increase, the speed is also accelerating, and it is extending to the depth and breadth, while China's mold industry is the ideal place to achieve the transfer of the undertaking. The future of the mold industry is promising. Mold enterprises must not only continue to pay attention to the traditional market, but also actively develop new markets. In the internationalization of operations, in addition to the United States, Japan, the European Union, and the Southeast Asian market, it should also consider opening up markets in countries and regions such as the Middle East, Central Asia, Russia, Eastern Europe, South America, Latin America, India, and Africa. China's mold industry should seize this golden opportunity to no longer be a single operation, but should diversify its operations internationally, expand its business space, and naturally expand the strength of the mold industry to develop the mold industry in the international development Potential, this is a very bright road.
Point of View 10: The manufacturing service industry in the mold industry should also be advanced. The development of any modern industry is closely linked with the manufacturing service industry, and the development of the manufacturing service industry is in line with the competitiveness of the industry.
These ten major viewpoints mentioned above are all made by well-known experts in the mold industry in light of the development status of the current mold industry in China combined with the current development status of the mold industry in the international market. They are authoritative, comprehensive, and typical. The improvement of China's mold industry's competitiveness is very helpful and it is worth noting.
View 1: The training of talents in the mold industry must pay attention to taking the talented road of the “industry-university-research, government-enterprise-school†alliance. The combination of production, education and research will help create results and industrialize them as soon as possible. In order to improve the competitiveness of the mold industry, in the modern industrial development has always maintained a strong vitality, talent cultivation can not be ignored, because the quality of talent is the main force of the mold industry competitiveness, mold industry is a concrete manifestation of vitality.
Point two: The main theme of the competitiveness of the mold industry is structural adjustment. According to the Guangzhou Plastic Mold Factory, the mold industry in China should vigorously develop high-tech molds mainly represented by large-scale, precision, complex and long-life molds to develop high-end products. Doing special work, doing fine work, doing fine work, doing special work and making new work is the direction of development. In internal management, deepening organizational structure adjustment, intensifying the transformation of production organization methods, implementing process reengineering, further changing the extensive state, strengthening management and control, improving and perfecting the management system that meets “professional, refined, and strong†and improving production, Technology, quality and other basic management levels, and promote the continuous improvement of the quality of the company's economic operation. This is because China is currently a major tool manufacturing country in the world, but China's advanced level of mold technology is still a big gap compared with the developed countries' industries.
Point Three: The size of the mold industry must expand its effect. This is because the benefits derived from the economies of scale of molds are advantageous to the production of mold clusters and should be encouraged to develop. While the specialization of “small and fine specialization†continues to develop, the scale effect naturally receives attention. In addition to making the company bigger and bigger and making economies of scale produce benefits, we must also increase the scale effect, including the development of "mold parks," "mold cities," and "mold gathering production bases." If the development of an industry wants to be stronger and more development space and development potential, it must expand the scale of the industry.
Point 4: The key to the development of the competitiveness of the mold industry is to upgrade the sense of innovation. The sense of innovation is the soul of mold enterprises and the foundation of the mold industry. We should start from the aspects of philosophy, technology, management, and systems. Upgrade should include many aspects such as product level, technical level, management level, profit level and improvement of labor productivity. Here we must pay attention to: Deal with the relationship between innovation and introduction, we must dare to explore, be creative, do not blindly introduce, do not blindly follow the trend in the development of the mold industry, others need to do so, but does not mean that the same for your mold business, Should choose timely match with their own mold industry to match the innovation path to go forward, otherwise you can only take a detour, and miss the opportunity.
Point five: The core industrial chain of the mold industry should be developed. It should combine the industrial chain of the mold itself with the upstream and downstream related industrial chains to form a larger industrial chain, build a mold production base with higher level and stronger capabilities, and gradually form a regional comprehensive supporting mold through market operation. The production chain and the larger industrial chain, including public service platforms and production services, will strengthen the core industrial chain of the mold industry. This is a very promising approach for the mold industry. It is an imposing and powerful force that can withstand the forces of modern industry.
Point 6: The mold industry must create new growth points in the new market. Guangzhou Plastic Molds believes that China's mold enterprises must not only raise the awareness of competition in the mold industry in the current market, in order to further strengthen their competitiveness, they should also develop new mold markets and create new growth points in new markets. We should not conduct vicious competition in the current only mold market. This is extremely unfavorable to the development of the mold industry. The development of China's mold industry must follow the path of sustainable development, and it must be oriented toward internationalization and development of precision molds. A good competitive environment is the strongest evidence for the development of the mold industry.
Point of View 7: The cost of the mold industry should be controlled reasonably and effectively. As China’s mold companies are facing the pressure of rising prices of raw materials and energy in the upstream and mold prices not rising, if companies cannot fundamentally solve the problem of cost control, companies will risk being eliminated. To this end, not only must the pressure of rising costs from the upstream be resolved through its own scientific and technological advancement and optimization and upgrading, but also relying on the informatization means and the joint efforts of all employees to carefully calculate all details in order to control all costs reasonably and effectively. The issue of cost is always a major issue for the development of the enterprise, and cost saving is an enterprise development that should be promoted.
Point of View 8: The marketing of the mold industry should be a combination of e-commerce and online marketing. Since e-commerce, IoT, and cloud technologies are currently viewed from the point of view of modern industry marketing, not only industry alliances can be formed, but also mold enterprises can establish more extensive and immediate contacts with customers at home and abroad, which will not only benefit each other's business. Communication with technology also facilitates attempts to launch virtual companies. The marketing feature of the E era is the rapid development of information technology. The development of the mold industry in modern industry should conform to this development trend, and the marketing of the mold industry should take the marketing path of combining e-commerce and online marketing. This is highly advanced.
Perspective 9: The operation of the mold industry should be diversified. As the scale of the global manufacturing shift continues to increase, the speed is also accelerating, and it is extending to the depth and breadth, while China's mold industry is the ideal place to achieve the transfer of the undertaking. The future of the mold industry is promising. Mold enterprises must not only continue to pay attention to the traditional market, but also actively develop new markets. In the internationalization of operations, in addition to the United States, Japan, the European Union, and the Southeast Asian market, it should also consider opening up markets in countries and regions such as the Middle East, Central Asia, Russia, Eastern Europe, South America, Latin America, India, and Africa. China's mold industry should seize this golden opportunity to no longer be a single operation, but should diversify its operations internationally, expand its business space, and naturally expand the strength of the mold industry to develop the mold industry in the international development Potential, this is a very bright road.
Point of View 10: The manufacturing service industry in the mold industry should also be advanced. The development of any modern industry is closely linked with the manufacturing service industry, and the development of the manufacturing service industry is in line with the competitiveness of the industry.
These ten major viewpoints mentioned above are all made by well-known experts in the mold industry in light of the development status of the current mold industry in China combined with the current development status of the mold industry in the international market. They are authoritative, comprehensive, and typical. The improvement of China's mold industry's competitiveness is very helpful and it is worth noting.
CNC milling machining is a CNC machine tool trajectory by means of computer controlled machine, using high speed rotating cutting tool if you want to shape the material. With the size of products have become increasingly demanding, machining from the original two gradually changed to 3 axis machining, 4 axis machining, 5 axis machining center, precision can reach 0.001mm. us the maximum machine processing size: 500mm * 1000mm *600mm, 800kg machine under the maximum weight of workpiece, Machine tool spindle speed 20000RPM to ensure that the surface of the workpiece is smooth and clean.we often processed material of aluminum,steel, copper, stainless steel, titanium, POM, Teflon and so on. At the completion of high quality, high dimensional accuracy of CNC milling machining parts process, we will divided into rough machining and processing method fine to get the best effect, the margin size coarse and finish machining is 0.5 * 1mm. after processing some of the products after surface treatment such as plating polishing surface passivation.Sand (powder), anodic treatment (aluminum common CNC anodized black red blue anode, anode, anode). CNC milling machining is widely used in aviation, automotive, communications, medical equipment, electrical appliances, drone.
In addition to,we also provide high precision machining and precision machined parts,supply custom machining services and cnc machining services for small batch.
Cnc Milling Machining,Cnc Precision Milling Machining,Aluminum Profile Cnc Milling Machining,CNC Milling Service
Hong Kong RYH CO., LTD , https://www.szcncturning.com