Recently, "LED New Generation Display Technology Specification" was released in Beijing. For the first time, the definition of LED TV product characteristics was clearly defined from the industry perspective, which played an active role in promoting future LED product specifications. Lu Jianbo, deputy secretary-general of the China Electronics Chamber of Commerce, pointed out that 2014 is the first year of LED TV development. As more manufacturers introduce new LED TVs, this product technology will become the mainstream TV display technology in the future.
The first LED display technology specification was released at the dawn of the LED market. The first "LED Next Generation Display Technology Specification" (hereinafter referred to as "Specifications") jointly sponsored by the China Electronics Chamber of Commerce and the Tsinghua University Color Research Institute and numerous companies was officially announced. This is also the first industry self-regulation norm since the LED entered the market.
Lu Jianbo, deputy secretary-general of the China Electronics Chamber of Commerce, said in an interview that due to the emerging LED market, the volume has not been released on a large scale. In order to avoid the problems such as the true and false 4K TV that appeared, everyone unanimously decided before the introduction of the national standard. The self-disciplined norms of the nature of industry alliances should be first introduced to ensure the order of the LED market in the future and effectively constrain the future market.
It is understood that the "Specifications" from the display viewing angle, color saturation, contrast, response speed, body thickness and weight, surface design and other six aspects, LED TV has been fully defined. Among them, the specified color gamut coverage can reach 115 or more; the contrast can reach infinite contrast; the response time can be less than 1 microsecond; the thickness can reach less than 5 mm; the optimal surface design is presented.
Lu Jianbo said that there are many LED TVs sold by LG, Changhong, Skyworth, Konka and other companies on the market. The mainstream size is 55 inches, and more sizes will be available for sale in the future.
Whether or not to use surface design has become the focus of controversy. It can be seen from the "Specifications" that the best surface design is presented as one of the six normative indicators. However, in the member units that initiated the "Specifications", non-surface design has also been introduced. The product, whether LED TV should be designed as a curved surface has become the focus of industry controversy.
Liu Weizhi, president of Shenzhen Skyworth-RGB Electronics Co., Ltd., said in an interview that Skyworth's 55-inch LED TV will not use curved surface design, and said that the 55-inch curved LED market is not playing. He stressed that the 55-inch TV made a curved surface is not conducive to family members to watch together, there will be blind spots of perspective. Larger-sized curved LEDs will have more visual impact, and curved surfaces are more effective.
LGDisplay, one of the two major LED panel suppliers, also introduced products with different designs in its own LG Electronics LED TV products. The same 55-inch LED TV LG uses both flat and curved designs.
The industry explained: In fact, the LED is made into a curved surface and a plane, which does not increase any technical cost. Since the LED characteristic is thin, it can be controlled below 5 mm, so the large-sized flat panel naturally has bending characteristics, so the LED property It is decided that it can be designed as a curved TV, but how to design the terminal products in the market depends on how the company chooses.
The drafters of the "Regulations" said in an interview that in the norm-setting process, they mainly want to tell enterprises in the industry and consumers what LEDs should look like. Therefore, writing surface design into "Specifications" does not mean that they must be curved surfaces. LED is the LED, because LCD TV can also be made into a curved surface but the cost will be greatly improved, so LED is the most suitable for the surface. The content specified in the Code is to present the best surface design, which means that the LED can present the curved surface design and is the best solution. It is not stipulated that the LED TV must be made into a curved surface design.
The display effect is superior to LCD TV as a new generation display technology, and LED has many advantages in comparison with LCD TVs on the market. Sun Qifeng of the Digital Television Standard Compliance Testing Center of the Ministry of Industry and Information Technology believes that compared with the traditional passive light source LCD TV, LED has the unique characteristics of self-illumination technology, so it has the characteristics that traditional LCD TV can't match in terms of picture quality and design.
It is understood that LED TV's unique self-illuminating technology structure can achieve infinite contrast, far beyond the 5,000:1 limited contrast of LCD TV; LED TV has a wider viewing angle than LCD TV, from all angles, the picture Always clear and undistorted, no distortion of the picture occurs. The response time of LED TV is only 0.001ms, which is 5000 times faster than the response time of 5ms of LCD TV. The response speed is beyond the range that can be recognized by the human eye, that is, the dynamic picture displayed has no trailing and the image has no overlap; LED TV can Presenting a wide color gamut of up to 115, the color display is more colorful. Sun Qifeng said that because it is a new generation of display technology, the market is still in the training period, and some actual conditions in the market need to be further improved and comprehensive investigations, so the national standards have not been introduced soon.
However, Lu Renbo stressed that since the market is just in the start-up period, and the national standards still need to go through complicated processes such as initiation, project, draft, and submission, it is difficult for national standards to be introduced in advance in the market. It depends on the product characteristics in the actual market, and the actual needs of consumers, and then jointly initiated, discussed, etc. by the enterprise, which takes quite a while.
Vacuum forming signage is a common type of sign, widely used in sign making due to its advantages such as beautiful appearance during the day and bright evening, good weather resistance, and durability. The vacuum forming signage character signboard consists of three parts: an acrylic vacuum forming panel, a luminous character box, and a luminous character light source.
Advantages of vacuum forming signage:
1. Attracting attention: vacuum forming signage breaks through traditional two-dimensional expression techniques, using three-dimensional shapes to activate people's spatial imagination, and has a strong sense of three-dimensional shape.
2. Various color:
3. High cost-effectiveness: balancing both day and night effects. Not easily deformed or faded.
4. Green and environmentally friendly: Due to the complete recycling and reuse of acrylic materials, it is considered a form of green advertising.
5. Good performance: It has good corrosion resistance, rain resistance, fire resistance, and self ignition resistance.
6. Long service life: with an average lifespan of 80000-100000 hours;
7. Energy conservation and environmental protection: The safety voltage of the lighting system inside the font is 12V, which does not pose any harm to personal safety. The entire product does not produce light pollution or chemical pollution during use.
8. Widely used: The vacuum forming signage are widely used in store advertisements and advertisements in shopping malls, hotels, parks, buildings, and various institutions.
Vacuum Formed Signage,Vacuum Forming Letters,Vacuum Forming Signboard,Vacuum Forming billboard
Dongguan Yiyongli Industrial Co.,Ltd. , https://www.absthermoforming.com