Many people will choose to go out during the Ching Ming Festival holidays. In order to ease traffic jams during the Ching Ming holiday, many areas in the country have planned the forbidden sections of large trucks. The following are the relevant information collected by snail second-hand trucks. In order to ensure the normal operation of the shipment, card friends will have a look!
Shaanxi
From April 2 to April 4, from 7:00 to 22:00 daily, a remote diversion of freight vehicles passing through Xi’an and passing through the Xi'an Ring Expressway will be carried out. Cargo vehicles are prohibited from passing through the West Han Section of the Beijing-Kunming Expressway.
Xi'an Ring City high-speed truck diversion route
Xi’an transit vans, originally converted to Xi’an Expressway in Xi’an Expressway, Xi’an Section of Jingkun Expressway, Xi’an Section of Baomao Expressway, Xianxun Expressway, West Section of Fuyin Expressway, and Hushang Expressway during the festive period From 7:00 to 22:00, it passes through the West Xianhai North Ring Road and Saitama Expressway.
Jingkun Expressway Western Han Dynasty truck diversion route
The freight trains from Hanzhong to Xi’an were handed over by the Xiejiaying in Hanzhong City on the Beijing-Kunming Expressway and transferred to the ten-day expressway. They arrived at Xi’an through the Baomao Expressway via Wuli Interchange in Ankang City.
The trucks from Xi'an to Hanzhong were interchanged by Qujiang, a high-speed Xi'an city expressway, and transferred to Baomao Expressway. They arrived at Hanzhong from the junction of Wuli Interchange of Ankang City on the tenth day.
All toll stations between Samsung and Shangyuan in the West Han Section of the Beijing-Kunming Expressway are prohibited from entering the truck.
Trucks with three or less axles can also pass the national highways 108, 316 and 210.
During the Huangdi Mausoleum Festival, Yanxi Expressway
From 5 a.m. to 1700 a.m. on April 4, Yanxi Expressway (G65W) Xi'an to Fuxian Section will prohibit the passage of large trucks and dangerous chemicals transport vehicles in both directions. At that time, the above vehicles can pass through Baomao Expressway (G65).
From 5 a.m. to 1700 a.m. on April 4, the 210 national roads Yijun to Luochuan and Huangling counties are prohibited from passing through large trucks and dangerous chemicals transport vehicles. The vehicles can pass through Baomao Expressway (G65).
On April 4, from 8 a.m. to 14:00 a.m., Baomao Expressway (G65) Yijun to Luochuan segment imposed temporary traffic control on large trucks and dangerous chemicals carriers.
At 7:00 to 14:00 on the 4th of the month, Huangling County and Huangshan Mausoleum of Baomao Expressway will give priority to the passage of vehicles that hold public memorial passes. The traffic police department in Shaanxi reminds that vehicles that do not hold a public ceremony ceremonial pass will be on the wrong route when they choose to pass.
Sichuan
G5 Beijing-Kunming Express Iasi
, G5 Jingkun Expressway (Yaxi Section) From 2100km to 2103km (Dianhaizi Bridge) Due to the reinforcement of the bridge structure, two-way roads are allowed to pass through a single lane.
2. G5 Jingkun Expressway (Yaxi Section) From 2183KM to 2182KM (in the direction of Xichang to Chengdu) Cannot restore the road temporarily due to construction progress, occupy the lanes and emergency lanes, and keep the passenger cars on the road.
G5 Jingkun High-speed Panxi Section
Panxi High Speed ​​Yellow River Section Construction
The construction of the 10.7-kilometre extension of the G5 Jingkun Expressway to Manshuiwan Section is proposed. The following travel plans are recommended:
(1) From Chengdu to Xichang, in the 2211-kilometer (Ya) section of the Beijing-Kunming Express Interchange, the road is narrowed down, and it is advisable to enter the expressway from Suining and Caojing to bypass the National Highway 108 to Manshui Bay;
(2) The Xichang-Chengdu direction will be queued at 2222 km (Yangshui Bay) of the Beijing-Kunming Express Interchange at the Yaxi section of the Beijing-Kunming Expressway. The route can be selected from Lishui Bay and Manshui Bay to bypass the National Highway 108 to Ningbo to enter the expressway;
(3) The high-speed toll station can enter Chengdu in the direction of high speed, and it is prohibited to go to Xichang; the Manshuiwan toll station can enter Xichang in the direction of high speed, and it is forbidden to pass through Chengdu.
Beijing-Tibet Highway
From April 2nd to April 4th, every day, from 3am to 15pm, the exit of Baigeqiao Liuhuan Road, the main road of the Beijing-Tibet Highway, goes to the Yingchengzi Toll Gate to the direction of Beijing, 4 tons is forbidden (Excluding ) Cargo traffic above. Vehicles that are prohibited from traveling can bypass the 6th Ring Road, Jingxin Expressway, and 110 National Road.
Jiangsu
Transit vehicles in Nanjing
Cross-boundary vehicles should not enter the Nanjing High-speed Ring Expressway. At the same time, buses in Nanjing No. 2 Bridge and Old Ring Road should be prohibited from operating in transit around the clock. Foreign trucks should be banned from 7:00 to 22:00. It is recommended that Nanjing transit vehicles select the G2501 Nanjing Ring Expressway. Select the relevant high-speed traffic at important hub nodes.
Detour scheme:
Xuzhou direction vehicle: At the Chengqiao junction, choose G25 Changshen Expressway;
èšŒåŸ Directional vehicles: At the Liuhe South Junction, select the Ning Luo Expressway G36;
Vehicles in Shanghai and Nantong: At the new South Anhui hub, select the G40 Shanghai-Shanxi Expressway;
Shanghai direction vehicle: At the Qilin Junction, choose G42 Shanghai Rongcheng Expressway;
Hangzhou direction vehicle: At the Dongshan junction, choose G25 Changshen Expressway;
Hefei direction vehicle: At the Qilin hub, select G2501 Nanjing Ring Expressway to Dongshan Hub to G25 Changshen Expressway to S38 Changhe Expressway via Guilin Zhuang Terminal.
Construction bypass road section
(1) Reconstruction and expansion of Jiangdu-Guangling section of the G2 Beijing-Shanghai Expressway and G40 Shanghai-Shanxi Expressway.
1. G2 Beijing-Shanghai Expressway Jiangdu to Guangling Section (K972-K1037) Reconstruction and expansion construction, hard road shoulder milling construction, and closing some emergency lanes.
2. From December 1st, 2016 to October 31st, 2017, Jiangdu to Guangling Section (K972-K1037) was rebuilt and expanded. Trucks and dangerous chemicals transportation vehicles were prohibited from passing through the road in both directions.
Detour route is recommended:
1. G2 Beijing-Shanghai Expressway to South Jiangsu and Shanghai Direction Please transfer from Singhu hub to S28 for high speed, and Runyang Bridge to G42 Hurong Expressway;
2. For the G40 Shanghai-Shanxi Expressway (Ningyang Section), transfer to Sunan and Shanghai from the Luohe Hub to the G42 Hurong Expressway.
3. In the direction of North Jiangsu: Suxi often head to the north of the direction from Guangling Hub to S29 Yanjing Expressway, or from Runyang Bridge to S28 to Yangzhou Expressway to G2 Jinghu Expressway, or from Taizhou Bridge to S35 to Taicheng Expressway to S28 Kai. Yang bypass high speed.
(b) G25 Changshen Expressway K1917+890 (Huanghua Tang Hub).
G25 Changshen Expressway K1917+890 heading towards Nanjing. Due to the construction of the Xinyang Expressway Huanghuatang Hub, the Nanjing direction K1917+890 (Huanghuatang Hub) will be closed to Suqian and the Xuzhou direction ramp. It is expected to end on April 30, 2017.
Detour route recommendation: from Huai'an to Nanjing, if you need to turn in the Huanghua Tong interchange S49 Xinyang high-speed to Sihong, Suqian, Xuzhou direction, you need to drive forward to the exit of Tieshan Temple, after high-speed re-entering the Huai’an Drive about 5 km to the S49 Xinyang Expressway or advance from the Maba West toll station to the high speed and follow the S331 provincial road to the Yongji direction.
(3) Construction of G2501 Nanjing Ring Expressway K134-K137 (North of Citigroup Station).
G2501 Nanjing Ring Expressway K134-K137 section was constructed on June 29, 2016. The construction period is expected to be one year. Currently, the construction of Xinghuo Road and the overpass bridge project (underpassing the Ninglian Expressway Bridge Project) in Nanjing High-tech Zone has been completed, resulting in G2501 (K134 -K137) The direction of Nanjing was closed, and vehicles heading for Nanjing took the overtaking lane of Huai'an and a traffic lane.
Detour route is recommended:
1. Towards South Jiangsu: The G25 Changshen Expressway detours from Nanjing No. 2 Bridge and No. 4 Bridge to Nanjing and Shanghai.
2. In the direction of North Jiangsu, from the direction of North Jiangsu, please transfer from the Yangtze River Bridge to the G25 Changshen Expressway from the Chenqiao Hub, or from the Nanjing Yangtze River Bridge to the G36 Ning Luo Expressway to the G25 Changshen Expressway, or through the Yangtze River Tunnel. Jiang's vehicles will be transferred from Jiangbei Expressway to G36 Ning Luo Expressway to G25 Changshen Expressway.
(4) Construction of the K88+700K28+500 in the direction of the airport from the high-speed Nanjing Airport S88.
Closed the K27+700-K28+500 half-lane road from Nanjing to the airport, and implement the road-passing measures. When the Nanjing-to-airport direction vehicle passes through the road section, the airport passes through the first and second lanes to the direction of Nanjing, and the airport goes to Nanjing to drive vehicles. The third section of the road and the emergency lane pass.
Longyan Expressway
During the toll-free period of Qingming Holidays, the traffic flow from Xiarong Expressway Longyan Gutian to Bozhou and Xixi increased sharply. Longyan Expressway implemented traffic control measures for large and medium sized trucks at peak traffic hours.
The time of control is from 8 o'clock on April 3 to 20 o'clock and from 8 o'clock to 20 o'clock on April 4.
Section: Xiarong Expressway Gutian → Longyan → Moderate → Hexi.
Measures: Large and medium-sized trucks are prohibited from driving on this section of the road. Please pass through the trucks to take the Changshen, Yongyong, Yonghe Expressway or National Highway 319. In violation of the prohibition regulations, a fine of 150 yuan shall be charged and 3 points shall be forfeited; if it is forcibly accepted and no dissuasion is accepted, a fine of 1,500 yuan may be imposed and detention may be imposed concurrently for 15 days or less.
At the same time, Xirong high-speed B line Hexi tunnel to moderate (Longyan to Luzhou direction): Xiacing high-speed B line 129KM to 124KM section, in the 129KM (Hexi tunnel) to the right diversion to the new high-speed, moderate use of new station mouth, Zhangzhou The direction was closed to the medium-sized exit, and the moderate station was closed to Longyan.
Detour advice
1. From Shanghang, Wuping, Changting, Liancheng to Fuzhou, Putian, and Quanzhou, follow the G25 Changshen Expressway heading toward Nanping to Yuecun Hub Turn G70 Fuyin Expressway toward Fuzhou, to Putian, Quanzhou Drive to Jishan hub and turn to G72 Quannan Expressway toward Quanzhou.
2. From Longyan, Yongding to Zhangzhou and Xiamen, you can drive from Longyan South and Longyan North to the high-speed road along S10 Yongyong Highway to Fuping Road to the Heping Road. Turn to S7211 Yongdu Expressway toward Zhangzhou and Xiamen.
3. From Longyan, Yongding to Fuzhou, Putian, and Quanzhou, you can drive from Longyan South and Longyan North High-speed Highway along S10 Yongyong Expressway to Fuping.
4. From Longyan and Yongding to Sanming, you can drive from Longyan South and Longyan North to the high-speed road along S10 Yongyong Highway to Fuping Road and turn to Heping Road. Turn to S7211 Yongyong Expressway and head toward Sanming.
Hunan
1. The fully enclosed construction of the entrance and exit of the Liangtian Toll Gate of the Beijing-Hong Kong-Macao high-speed section should be carried out from March 10 to July 10. During the construction period, the Zhangzhou South Toll Gate or the Yizhang Toll Gate can be selected as the passing vehicle.
2. Shanghai Kunming Expressway Shaohua Section will be fully enclosed at the entrance and exit of the Chinese toll station. It is expected that the construction will be completed on June 30, 2017. During the period, vehicles passing through the station can choose Anjiang Toll Station, Tongmu Toll Station, and Huaihua South Toll Station to go up and down.
3. For the K162+700M section of Ningbo-Huaihua Expressway, the single-way two-way traffic (through-passage) shall be implemented. When the passing vehicles pass through this road section, attention shall be paid to changing lanes and slowing down.
4. The implementation of emergency road traffic control shall be implemented on the Zhangqing Highway from the flag to the intersection of Baizhangxia Road. The time of control is from 24:00 on January 7, 2017 to 24:00 on January 7, 2019. Control section: Zhangjiajie City, Wulingyuan City, and Wulingyuan Core Scenic Area (Mark Gate, Baofeng Lake, Huanglong Cave, Grand Canyon and other scenic spots), all vehicles need regular high-speed Yang and interoperability (stub: K288+283), Longyang The highway or the original 1801 highway passes through Xinqiao Town, Cooperative Bridge, Yanghe Township and Longyang Highway.
Brass has excellent CNC Machining Turning performance, high-speed machining turning under the brass can get excellent surface finish. Our technical team has very good experience in machining brass, machining brass including brass plate, brass rod, brass tube. Brass hardware parts has high strength, good plasticity in hot state, good plasticity in cold state, good machinability, easy welding and good corrosion resistance. Brass parts are very durable. It is electrically conductive and does not usually corrode or deteriorate over time. Thus brass is often used to produce products with longer service life. Machining brass parts Widely used: pipes, radiators, ship parts.
Machining Brass, Brass Machined Parts, Perfessional Brass Parts Machining, Machining Brass Conponents, Brass Parts Machining
Hong Kong RYH CO., LTD , https://www.szcncturning.com