Qilu epichlorohydrin plant design value of 32,000 tons annual output, in the past as a chlorine balance device, has maintained at a semi-load state for many years. Since last year, the market for epichlorohydrin has been operating at a high level, with a ton price profit of 10,000 yuan, making it the most profitable product for Qilu. Qilu chlor-alkali plant to seize the opportunity to enhance the profitability of the product, through refined management to ensure continuous overload operation of the device, to create the conditions for the full use of marginal product benefits.
The plant centered on the two main lines of “stable production, high production, cost reduction and efficiency increaseâ€, starting with the unsafe behavior of people and the unsafe status of the materials, and endeavoring to clean up “low standards, old problems,†in professional management of safety, technology, and equipment. The "bad habits" problem has deepened the management of the "three basics" and optimized the operation of the cyclization tower so that the technological indicators are in control at all times and the requirements for overload and stable operation of the equipment are met to the maximum. The workshop also fully implements the economic calculation of the team and reduces labor costs, increases production, and increases the efficiency of “six to six†labor competitions, mobilizes the production enthusiasm of operators, so that the average daily production of epichlorohydrin reaches 106 tons/day, which is higher than the Daily production at full load.
At the same time, the plant is focusing on the status quo of large water users, giving full play to the intelligence of the technicians. It has performed the dichlorohydrin reaction of the epoxy unit and replaced the industrial water with chlorine water instead of the fresh industrial water. Filter press filter, waste water recycling and slaked lime are used for technical transformation, so that the device can save 45 tons of fresh industrial water and reduce 15 tons of waste water per hour on the basis of overload production. The comprehensive qualification rate of wastewater has also been greatly improved. In addition, all economic indicators have reached the best level in history while product output has reached a record high.
Hongwen Vehicle Industry focuses on the production and sales of automotive parts, providing high-quality products to ensure the safety of every car owner, and winning the favor of many new and old customers with personalized services. We will face new challenges and achieve new leaps with a renewed outlook, stronger strength, more complete institutionalized management, and more resolute steps.
The car wind coil plays a role in appropriately closing some of the intake ports during engine cold start, increasing the gasoline concentration of the mixture entering the cylinder, and improving the engine's starting performance. After the engine is running normally, the choke should be fully opened, otherwise it may cause the engine to not run normally and cause excessive fuel consumption due to the rich mixture.
Are you planning to purchase a fan circle for your car? Click on the relevant suggestions below to browse our Wind Circle products. We are committed to providing you with high-quality and customizable wind coil products.
Related Suggestions: Fan Shroud, Universal Radiator Fan Shroud, Fan Shrouds For Cars, Radiator Fan Shroud assembly, Auto Radiator Fan Shroud, Aluminum Radiator Fan Shroud
Fan Shroud,Radiator Fan Shrouds,Fan Shrouds For Cars,Radiator Fan Shroud Assembly,Auto Radiator Fan Shroud,Aluminum Radiator Fan Shroud
Danyang Hongwen Vehicle Industry Co., Ltd. , https://www.cn-hosc.com