PVC Suction Hose Production Line /PVC suction hose extrusion line /PVC Helix Reinforced Hose Extrusion Line/ spiral reinforced pvc suction hose extrusion machineÂ
The line is compose of two extruders, forming unit, bath, winder.
Â
Product application
The wall of this Pipe is soft PVC and rigid PVC helix as reinforced, featuring extrusion resistance, corrosion resistance, negative pressure resistance, anti-bending, good negotiability, so it is suitable to conveying gas, liquid and powder, widely used in industry agriculture, construction and irrigation, etc.
Â
Main Technical Parameters
| Extruder model    | First extruder |   SJ-55 x30 |    SJ-65 x30  |
| Second extruder | SJ-45x25 | SJ-65x25 | |
| Diameter range(mm) | Ø 25- Ø50 | Ø64- Ø 150 | |
| Haul-off speed(m/min) | 2-10 | 0.2-2 | |
| Max. output (kg/h) | 20-40 | 40-75 | |
| Total installed power(kw) | 31 | 58 | |
| Actual power consumption(kw) | 21 | 40 | |
| Overall dimension LxWxH(m) | 15x4x2 | 16x5x2.5 | |
| Overall weight(kg) | 3.2ton | 4.3ton | |
Â
PVC Suction Hose Production Line /PVC suction hose extrusion line /PVC Helix Reinforced Hose Extrusion Line/ spiral reinforced pvc suction hose extrusion machineÂ
The line is compose of two extruders, forming unit, bath, winder.
Â
Product application
The wall of this Pipe is soft PVC and rigid PVC helix as reinforced, featuring extrusion resistance, corrosion resistance, negative pressure resistance, anti-bending, good negotiability, so it is suitable to conveying gas, liquid and powder, widely used in industry agriculture, construction and irrigation, etc.
Â
Main Technical Parameters
| Extruder model    | First extruder |   SJ-55 x30 |    SJ-65 x30  |
| Second extruder | SJ-45x25 | SJ-65x25 | |
| Diameter range(mm) | Ø 25- Ø50 | Ø64- Ø 150 | |
| Haul-off speed(m/min) | 2-10 | 0.2-2 | |
| Max. output (kg/h) | 20-40 | 40-75 | |
| Total installed power(kw) | 31 | 58 | |
| Actual power consumption(kw) | 21 | 40 | |
| Overall dimension LxWxH(m) | 15x4x2 | 16x5x2.5 | |
| Overall weight(kg) | 3.2ton | 4.3ton | |
Â
The dust skeleton is the rib of the filter bag. It should be light and easy to install and maintain. The quality of the frame directly affects the filtering state and service life of the filter bag. The natural granite is used to process the circular curved plate through mechanical processing. The whole structure is smooth and smooth. It has the characteristics of corrosion resistance, abrasion resistance and high temperature resistance. The exterior is poured with high strength and high temperature resistant and alkali resistant materials. The strength and life span of the equipment are greatly enhanced by the outer protective steel plate of the barrel equipment. The body uses 1 meters per section structure, the joints have concave and convex joints at each joint, and the joints are connected with furan resin or acid alkali glue mud at the joint to ensure that the connection is not leaky; overcoming the common faults of the seeping and air leakage of the original granite duster. The upper sink. For the ceramic structure, the ceramic Dust Collector ensures no water leakage in the water supply process, avoids the seepage setback of the original granite duster water trough, and strengthens the use effect of the dust collector. The simple installation is 1 meters per day, and the site can be installed for half a day, reducing the construction period.
Dedusting Skeleton,Stainless Steel Dedusting Skeleton,Flat Dedusting Skeleton,Silicone Dust Removal Skeleton
Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com