Â
Â
- Yokohama type fender net type
- Sling pneumatic rubber fender
- Ribbed pneumatic rubber fender
Floating pneumatic rubber fender, Yokohama fender, ship airbags,Super cell fenders (SC type), Cone fenders, Super Arch fenders (type SA), Cylindrecal fenders (Type Y), Semi-circular fenders (Type D), Type GD fenders, Type I fenders, Type U fenders,Turn cell fenders, Type π rubber fenders, Rubber ladder, Rubber fenders for tug boats, PVC yacht fenders etc.
 Mearsk , MSC, COSCO, CMACGM, OOCL, APL, NYK , NEW YORK port, KOBE port, YOKOHAMA port, Singapore port, ANTWERP port, LONDON port, HAMBURG port, DUBAI port, QINGDAO port, SHANGHAI port etc.
2.Product description:
Penumatic rubber fender with chain protection
(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Our ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of  pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.
(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of sea inflatable fender, its adaptability is much higher than other fender.
Â
(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
Â
Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.
 Fender performance specification  Â
Â
| Size | Initial internal pressure |
Guaranteed energy absorption                  GEA(kJ) |
Reaction force at GEA deflection                        R((kN)) |
| D×L(m) | (Kpa) |
Minimum value at deflection 60±5% |
Tolerance ±10% |
| 0.5×1.0 | 50 | 6 | 64 |
| 0.6×1.0 | 50 | 8 | 74 |
| 0.7×1.5 | 50 | 17 | 137 |
| 1.0×1.5 | 50 | 32 | 182 |
| 1.0×2.0 | 50 | 45 | 257 |
| 1.2×2.0 | 50 | 63 | 297 |
| 1.35×2.5 | 50 | 102 | 427 |
| 1.5×3.0 | 50 | 153 | 597 |
| 1.7×3.0 | 50 | 191 | 639 |
| 2.0×3.5 | 50 | 308 | 875 |
| 2.5×4.0 | 50 | 663 | 1381 |
| 2.5×5.5 | 50 | 943 | 2019 |
| 3.0×5.0 | 50 | 1210 | 2104 |
| 3.0×6.0 | 50 | 1485 | 2583 |
| 3.3×4.5 | 50 | 1175 | 1884 |
| 3.3×6.0 | 50 | 1675 | 2783 |
| 3.3×6.5 | 50 | 1814 | 3015 |
| 3.3×10.6 | 50 | 3067 | 5257 |
| 4.5×9.0 | 50 | 4752 | 5747 |
| 4.5×12.0 | 50 | 6473 | 7984 |
Characteristics of modern-day folding tables and chairs originated in medieval times, a period from the fall of
the last Roman Emperor, in 476 AD, to the fall of Constantinople, in 1453.
Furniture makers deliberately built tables and chairs that could easily be disassembled and transported. So
when harsh fighting erupted between nations, lords, and neighbors, families could grab their belongings
and flee at a moment's notice. Most of the tables of this era collapsed rather than unfolded.
Bed and Board
Interestingly, the expression "bed and board " was coined in the Medieval era with the latter "board"
referring to the main table used for dining. The "board" was just that - a portable trestle table that could
easily be packed away when not in use and transported with ease. Folding chairs were popular amongst
the medieval aristocracy since again they could be easily folded and carried when on the move. Styles
were simple and practical. They were usually made of oak or other woods.
Folding tables have evolved through the centuries with the emergence of new technologies and designs.
Today's tabletop options range from wood, particle board, and melamine, laminates, aluminum, plastic,
and so forth. Table legs can be built with steel, aluminum, other metals, and plastic. So while the main
use of folding tables has changed throughout history, the purpose remains the same - collapsible,
easily storable, portable, and lightweight.
folding camping table,camping table,aluminium camping table,adjustable camping table,camping table chair set
Ningbo Autrends International Trade Co., Ltd. , https://www.outerlead.com