Plastic Bottle Double Station Extrusion Blow Molding Machine

Double Station Extrusion Blow Molding Machine TP5D-75

Type TP5D-75
Extrusion Blow Molding Machine
Double Station Single Head

*Volume 1L to 5L
*Net Weight 100-280g
*Output 250-380 pcs/hr.

Standard Features


1. Double station blow molding machine with 75mm grooved extruder.

2. Single, double triple and quadruple head capacity.

3. Reliable two-plate axes mould locking.

4. Processing HDPE, LDPE, PP capacity.

5. Multi-blow extrusion heads with quick color change.

6. In machine automatic deflashing and cooling station.

7. Nitrided screw and berrel.

8. Adopt hydraulic accumulators.

9. Low power consumption.

10. Up blowing system.

11. Machine control by microprocessor B&R

12. SERVO valve for hydraulic and 100/300 point Parison thickness.

13. Gripper for bottle take out inside machine.

14. Carriage fast movement by Prop Valve.

15. Safety ladder and rail protection.

Die head
This machine when using single die head, can make 2L to 5L bottles,
However, the die head can also be changed to double die head, triple die head and 4 head to be able to make other smaller size bottles.

Single die head   (2~5L)
Double die head (0~2L)
Triple die head  (0~750ml)
Four die head  (0~500ml)

Changing the die head system takes around 1.5~3h, this also included heating time.
Configuration





 

Screw Elements and Segmented Barrel

1. Do not start the machine when the screw has not reached the preset temperature. 2. Prevent metal fragments and debris from falling into the hopper. If processing recycled materials, a magnetic hopper must be added to prevent iron filings from entering the hopper. 3. When using anti-salvation, make sure that the plastic in the barrel is completely melted, so as not to damage the transmission system parts when the screw retreats.

Screw Elements And Segmented Barrel,Screw Elements,Screw Head Barrel,Screw Barrel Kit

ZHOUSHAN JINTANG OULIN MACHINERY CO., LTD. , https://www.oulinscrewbarrel.com