1. Do not use tires, nuts, and nuts for oil wheel repairs. A few private car owners are trying to prevent rusty nuts and bolts on the wheels from being rusted. When installing them, they ingeniously paint the nuts and bolts with oil. They do not know that this is not only an error, but also brings traffic safety. Certain hidden dangers. After bolts and nuts are tightened, they have self-locking characteristics. When the lubricant is applied, the self-locking coefficient between the two becomes smaller and the self-locking performance decreases. When the car is driving at a high speed, bolts and nuts are easily loosened or even dropped off, causing a traffic accident.
2. Do not wash the interior of the car with water until the summer arrives. Common car owners wash their bodies with water while wiping them with a rag. It is necessary to remind private car owners that the interior of the car body should not be flushed directly with water. Because the underside of the floor rubber pad in the cab is not "a flat surface," the structural requirements make the underside of the cab floor pad have many recesses and through holes. After rinsing with water, it is either deposited in the groove and does not dry easily, or flows from the through hole to parts such as the gearbox to cause rust. In particular, cars with better sealing performance cannot wash the interior of the vehicle directly with water. The correct method is to wipe with a wet rag, but to avoid accumulation of water.
3. Do not mix coolants of different brands. Everyone knows that engine coolant should be added in time, but do you use different brands of coolant together? If so, advise you to release the coolant as soon as possible and re-add the same brand of coolant. Because different brands of coolants may have very different chemical properties, such as antiseptics that are effective against ferrous metals, they are often corrosive to aluminum products, while the preservatives that are suitable for Altai Gold are harmful to ferroalloys. Because different brands of coolants use different preservatives, they cannot be mixed.
4. Do not step on the accelerator when the EFI car starts, step on the throttle before starting the engine, it is a habit of many drivers, especially when the cold car starts in winter. However, this starting method does not apply to EFI cars. The engine equipped with an electronically controlled fuel injection device is different from an ordinary carburetor type engine. Its fuel injection control device can automatically adjust the fuel supply according to the temperature and operating conditions of the engine so that the engine can be started smoothly, that is, when the cold car starts. The fuel injection control device can automatically increase the fuel supply. Therefore, when the engine of the EFI sedan is started, there is no need to step on the accelerator, and it is even more urgent not to step on the engine before starting the engine. Otherwise, the engine start is not good.
1. We support ODM & OEM.
2. Efficient and Innovative Quality Sample Service, Strictly Quality Control System.
3. Professional Online Service Team, any mail or message will be replied within 24 hours.
4. We have a strong team that, The all-weather, omni-directional, wholeheartedly for customer service.
5. The customer is supreme, the good faith for this.
Harvester Accessories,Agricultural Harvester Spare Parts,Harvester Spare Parts,Harvester Cutting Blade
NINGBO CITY YINZHOU RUICAN MACHINERY CO.,LTD , https://www.ruican-casting.com