   Also known as plumbing, road cleaning, high pressure cleaning, and sewer cleaning. The fence cleaning vehicle is mainly used for guardrail cleaning, cleaning of roads, square pavements, sewers, pipeline sediments, dead mud mud dredge, can also be used for cleaning industrial drainage pipelines, walls, etc., city road barriers, roads on both sides of the wall Brushing. The fence cleaning vehicle can be equipped with sprinkler and sewage suction device, which integrates cleaning and suction. Can also be installed according to user needs high-pressure water pump, suitable for scouring the city of small advertising and scrub city sculptures.
Fence cleaning car use
It is used for cleaning the double-sided guardrails of highways and can be used for road surface spraying, greening and fire fighting operations.
Product performance characteristics:
1. Double brush interactive job design, high cleaning efficiency, fast operation, 3-5km per hour.
2. The special design device automatically maintains a constant distance between the cleaning brush and the guardrail board to ensure the quality, efficiency and safety of the cleaning.
3. High-pressure water flow design, high efficiency and water saving, washable fence 5-8km per ton of water.
4. Unique bristles design, cleaning does not leave dead ends, do not scratch the paint.
5, supporting the installation of a variety of car chassis, but also allows customers to increase the price of choice.
6, the use of safety, energy saving and environmental protection, stable and reliable.
◠Cleaning vehicle maintenance steps:Before cleaning, the body surface temperature should be cooled below 60°C, and the ambient temperature should be maintained at 0-40°C. The water spray head is more than 15 cm away from the body paint surface. The order of flushing is from the roof to both sides. When rinsing the grille part in front of the car, misty water flow should be used, and the water column should not be flushed against the fins of the water tank or condenser. If the plastic arch cover is installed at the mudguard, it should be removed and cleaned, and the mudguard should be thoroughly cleaned. , Fender inside.
1. It is to clear away the remains of the car body. You can use the all-round descaling water to wipe with a clean cotton cloth. Then wring out the dustless cotton cloth with the car wash liquid, dry the car paint along the direction perpendicular to the car's driving direction. Car wash on the surface. Finally, rinse the car wash thoroughly with plenty of clean water, and dry it with a synthetic sheepskin towel. Wipe dry to achieve the whole car water-free traces, glass stainless
2. The high-pressure water jet cleaning is to wash away the dirt contaminated on the car body surface from top to bottom with a high-pressure water jet head, then flush the rear part of the car body, and finally wash the lower part of the car. This step is to pay attention to the need to fully flush the chassis and thoroughly clean the edges, bends, fenders, etc. Particular care should be taken to thoroughly clean the sand and dirt from the wheels, brake discs, fenders, front grilles, door frames, and skirts.
3 is to wipe, use a car wash sponge shampoo car shampoo, wipe the body again, if contaminated objects are not easy to remove, you can repeatedly wipe, pay attention to wipe the body up and down the sponge to be used separately, so as not to scratch the body under the sand paint body paint. Then rinse with high-pressure water, in particular, to clean the seams at the car seams, foam at the corners, etc.
4. Apply liquid to spill the shampoo car wash on the body. There are two methods, one is to use multi-functional high-pressure foam washing machine, spray evenly, to the upper and lower regularly shaking nozzle; the second is manual preparation, that is, according to a certain proportion of shampoo car wash liquid, do not use washing powder, soapy water, Dewaxing detergent.
The brazed Plate Heat Exchanger (BPHE) is a type of heat exchanger construction in which metal plates with flat surface offer an effective and efficient method of heat transfer. These plates are joined together by brazing (mainly copper), typically stainless steel. Due to the close contact between the two surfaces, there is a very high heat transfer coefficient, leading to a low overall unit size. They therefore provide much greater efficiency than a Shell And Tube Heat Exchanger.
Brazed Plate Heat Exchangers are widely used in air-conditioning and refrigeration, power generation, and other process applications. For example, within a cooling cycle, a BPHE can be used to transfer heat from one fluid to another. Typical fluids in such coils and systems are either glycol or water. In a power system, a BPHE can be used to cool oils, recirculating lubricants, fuels, and other fluids.
The major advantages of BPHE are their compact size, efficient heat transfer and minimal pressure loss. BPHEs also have low maintenance requirements and a long service lifetime. Furthermore, because of their flat surface design, BPHEs have no patterns or turns and thus lower energy costs and minimize fouling. Finally, the material used in BPHEs makes them resist to corrosion and heat, making them ideal for high temperature and hostile environments.
Brazed Plate Heat Exchanger,Brazed Phe,Brazed Type Heat Exchanger,Copper Brazed Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com