Electric & hydraulic driven winches are supplied in the range of 24mm U3 chain to 87mm U3 chain. The new maritime winches are of modular type,this means various combinations are available. New maritime Winches are made of high tensile materials and therefore compact and low weight.
New maritime winches are designed in such a way that minimum maintenance is required ,The energy consumption is taken into account with high efficient bearings and effective controls systems.
. Stepless control of winches, locally or remote.
. Effective and safe operation.
. Maximum protection of drive and control parts. no loose piping on the deck.
. Quality components of suppliers with worldwide service network.
. Various potions on dimensions possible.
. Full system operation bulid into the winch.
. Compact design with high levels of reliability and efficiency.
. The electro motor has a stand standstill heating and is overload protected by PTC.
. Certification by all major classification societies possible.
. Very low maintenance. all wear and tear parts are of stainless steel.
Â
OPTIONS AND EXTRAS
. Speed control system for paying in the chain to prevent damage to the hull and anchor pocket
. Automatic speed control system for paying"out" the chain and anchor(automatic anchor drop system)
. Automatic mooring operation by means of self-tensioning
. Low speed option for clutch operation
 . Hydraulic or pneumatic operated clutch
. Hydraulic or pneumatic operated brakes
. Alarm signal to the boards alarm system
. Higher levels of water tightness above IP56
. Load measurement indication
. Chain length measurement system
. Oil cooling system optional
. Finished with full paint system
. Radiographic controls
. Remote controls
. Footswitch operation
| Product Details | Type of Marine Hydraulic Anchor Windlass |
|
1,Name: 14-58mm double Gypsy double/single Drum marine hydraulic anchor windlass 2,Driven: Electric / Hydraulic / Diesel / Manual 3,Loading capacity:0.5~200 ton or customized design; 4,Wire rope capacity:20~3600m or customzied design; 5,Working speed:5~20 m/min or customized design; 6,Power supply:220~690V,50/60HZ,three phase or customized design. |
Â
TYPE |
 LOAD (KN) |
 SPEED (m/min) |
 CHAIN DIA (mm) |
 POER (KW) |
17.5Â |
11.5 |
≥9 |
17.5 |
7.7 |
19/22Â |
13.5/18.2 |
≥9 |
19/22 |
7.7 |
25Â |
28.5 |
≥9 |
25 |
7.7 |
28/30/32Â |
33.3/38.3/43.5 |
≥9 |
28/30/32 |
11.3/11.3/14.7 |
34/36 |
49.1/55.1 |
≥9 |
34/36 |
14.7/19.41 |
38/40 |
61.4/68 |
≥9 |
38/40 |
24-48 |
42/44 |
75/82.3 |
≥9 |
42/44 |
24-48 |
46/48 |
89.9/97.9 |
 ≥9 |
46/48 |
24-48 |
150 |
103/118.4 |
≥9 |
150 |
24-48 |
52/54 |
128.4/138.5 |
≥9 |
52/54 |
45/50 |
Production Flow:
Â
 Marine equipment and parts supplying (including Marine doors, Marine windows, Deck outfitting, Anchors, Chains, Hatch covers, Windlass, Capstan, Airbags and Mooring ropes etc.)
 Production and Processing comply with samples and drawings of buyers
Senior Management at all our facilities, ensuring communication is open & easy
Good service and after-sale service to ensure the satisfaction of our clients
Certificate:
Â
High Precision Machining is defined as a process of changing the dimensions or the performance of workpiece with machining facilities.
According to the temperature of the workpiece while in machining, high precision machining can be divided into cold working and hot working. Usually, machining under indoor temperature, and won't change cause chemical change or phisical phase change is named cold working. On the other hand, if under temperature, higher or lower than room temperature, which will lead to chemical changes or phase changes, it will be called as hot working.
For high precision machining, the machining tolerance can be up to 0.0001-0.001mm, the surface finish Ra can be 0.02-0.1um.
Machining precision is to describe the actual geometrical parameter of the part after machining, such as the size, the form, the position, comparing with the theoretical geometry parameter. The difference from these two parameters is the machining tolerance. The number of the difference show the machining accuracy, the bigger, the lower of the machining precision, the smaller, the higher machining precision.
High Precision Machining,Aluminum Alloy Diecasting,Precision Parts,Machining Parts,Malaysia Zinc Die Casting
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.aldiecastings.com