Heat Pump Batch Dryer Type Incense Drying Machine

KINKAI Heat Pump Incense Drying Machine Introduction
KINKAI Heat pump dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
 
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final incense will be dried by the hot air circulating in drying chamber



Features of KINKAI Incense Drying Machine:
1, Energy saving and environment  protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise

2, Stable property and operating easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.

3, Second waste heat recovery technology(patent)
    Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.

4, Accurate control temperature and humidity
    According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.

5, Horizontal Blowing 360ºC
    By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.

6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time

Technical Parameters

 
Our Company



Package and Delivery
For heat pump dryer parts---with plywood
For drying chamber +trolleys
  If shipped with 20ft container or 40ft container, no packing
  If shipped with LCL( less than container load), packed in plywood


Our Service

A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

B. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

 

High Pressure Cleaning Truck

Shandong Dingjie Shengshi Environmental Protection Equipment Co.,Ltd , https://www.cleanmagicscrubber.com