Model NO.: WLFM
Solidify: 1.2 M3 /Min
Panel and Profile: See Attachment.
Top Coil: 0.5-0.6mm, 280MPa
Lower Coil: 0.5-.06mm, 280MPa
Laminating Speed: at 1-3m/Min
Feature: Metal Panel, Environmental, Light Weight, Fireproof
Grade: 3
Customized: Customized
Trademark: WILLINGIN′T
Transport Package: Wooden Cases
Specification: CE& ISO9001
Origin: China
Shutter Door Roll Forming  Machine
 Brief IntroductionÂ
wl-eps laminator for corrugated sandwich panel is a integrated production line consisting of a roll forming machine and a sandwich penal laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine is consists of uncoiler, main body. The laminating system is consists of feeding, glue, heating, laminating and post-cutting.
The whole machine is under control of PLC.
The line can produce single corrugated sheet, and can also laminate the sandwich panel with EPS.
The suitable material is colored galvanized steel sheet with height 0.4-0.6mm,the inserted material is EPS.
Â
wl-eps laminator for corrugated sandwich panel is a integrated production line consisting of a roll forming machine and a sandwich penal laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine is consists of uncoiler, main body. The laminating system is consists of feeding, glue, heating, laminating and post-cutting.
The whole machine is under control of PLC.
The line can produce single corrugated sheet, and can also laminate the sandwich panel with EPS.
The suitable material is colored galvanized steel sheet with height 0.4-0.6mm,the inserted material is EPS.
Â
  Components and Functions
| Standard Decoilers |
For use with 1200±5 mm wide steel coil sheet up to 5 tons in weight. The coil holder is supplied with two supporting wood and expanding mandrels. It is un-powered. The Max. outer diameter is 1260mm,the inner diameter is 500mm or 600mm. |
| Hydraulic Station | To supply the power for cutting, it is off work when the cutting stop |
| Consecutive Laminating Body | Consists of guiding, laminating, glue providing, glue scraping, heating, auto cutting and controlling.  |
| Coil Guiding equipment | When the coil sheet come the laminator, the guiding system ensures the sheet to the correct position. |
| Pre-heating system | Before glue scraping, the coil sheet will be heated in this system. |
| Guiding roller core | When the EPS fed to the machine, the guiding roller will guide the EPS to the laminating cabinet, the roller core will go the cabinet too. This makes the EPS closer to the top and lower coil sheet, thus make the finished panel more solid. |
| Glue Providing |
There are 4 drum stand, with proportion at 60:40 ( the glue is provided by the buyer, and the quality shall be meet the speed at 3-4 meters per minute). The glue will scraping at 4 directions, this guarantees the glue can be supplied at different speed. This part is operated separately. |
| Glue Filling Pad | The pad is in to-and-fro movement, there are air cushions on the concrete pad. |
| Heater | To open the heating pipe or not and how many pipes to open, is depend on the temperature and the solidify time of glue. The heater is to heat the top and lower coil sheet at appropriate temperature in laminating |
| Cutting system ( for laminating use ) | In production, when the sandwich panel meet the set length, the system will cut the panel with milling cutter. (also equipped with another set of straight cutter) |
| PLC Control System | Main components imported from Mitsubishi. All language in English. |
| Supporting Table | The finished panel will come out to the table. |
| Safety Guard | All the chains and sprockets are covered with a guard. this will prevent the workers from injured |
| C-shaped groove-making equipment | This equipment is prepared for making the mineral wool sandwich panel |
| Groove-making equipment for EPS | To make the grooves of the EPS, make it possible for the buyer to produce the rabbet joint sandwich panel. |
| Edge cutting equipment | To amend the edge of the EPS after the panels are laminated. |
Working Flow
feed the lower coil sheet  ---- sheet guiding  ----- glue adding ----- feed the top coil sheet ------ sheet guiding ----- folding ----- g;lue adding-----feed EPS panel ------- add glue to EPS panel ----- upper and lower roller of the laminator tighten and roll ------- heating  -------  groove making------post cutting (under control of PLC, adopt encoder to meet the set length, automatic cutting) -------- sandwich panel come to the supporting table
| 1 | Manual Uncoiler | 1set |
| 2 | Infeed Guide | 1set |
| 3 | Roll Forming Station | 1set |
| 4 | Rectifying Device | 1set |
| 5 | Post-cut Equipment | 1set |
| 6 | Hydraulic Station | 1pc |
| 7 | PLC Control Console | 1pc |
| 8 | Product Support Table | 2pcs |
| 9 | Spare Parts | 1box |
We are a manufacturer in China
we can make the machine as per as your request.
we can make the machine as per as your request.
About the machine,
we need you to provide us informaton,
1. profile drawing and size of product (model),Â
2. steel thickness range,
3. coil width,
4. steel stress,Â
5. requirements for configuration.
For price and other details, we welcome you to inquire us.Â
Please Contact Miss. Lucy
Â
Electric City Bike,Black City Electric Bike,Electric City Bike For Safe Travel,Electric City Bike With Good Brakes
FOSHAN GUANSEN BICYCLE TECHNOLOGY CO.,LTD. , https://www.htxbicycle.com