Environmentally Friendly Cross Belt Magnet for South Africa Market

Introduction of magnetic separator

 Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute.

The efficiency of the separator depends upon the strength of the magnet and the speed of the conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.

The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.

Classification of magnetic separator

Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system

Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials.

Discharging Type of magnetic separator

Manual Discharge Type (without motor and belt)

Self-Discharging Type (with motor and belt)

Cooling Type: (just for electromagnetic type)
--Air Cooling 
--Oil Cooling
--Fan Cooling

Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.

Features of magnetic separation equipment

1. Excellent magnetic field intensity, Used to remove iron particles from material
2. The wholly sealed structure makes the remover water-proof, dust-proof and corrosion resisting.
3. Low energy consumption.

Application of belt electromagnetic separation

widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.

Components of magnetic separator

Permanent magnetic plate, Belt , Motor, Iron frame.

Sketch installation drawing of magnetic separator

Model Selection

1. Before choosing, you should pay attention to whether to convey the tape, bandwidth, inclination, material properties, humidity, and thickness, the amount of iron in the material, the nature of the ferromagnetic material, the requirements of iron removal and the environment used, etc. a kind
2.When there is more iron, you should choose RCDC, RCDD, RCDF series;
3.When the iron content is small, you should choose RCDA, RCDB, RCDE series;
4. When using suspended electric and permanent magnet iron remover, if the material is very thick, it can be used with the WCTG series of five parallel rollers, which can improve the iron removal rate and achieve the ideal iron removal effect;
5.When the material contained in the material cannot be adsorbed by the iron remover, the metal detector should be used to detect the metal, and the automatic iron removal should be performed after the automatic shutdown.

Technical Data of  magnetic separator

Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant


 

Our Services

1. One year guarantee.

2. Sample testing.

3. our technician can design your project based on your information such as flow chart.

4. Engineer available for over seas installation and training.

5. after sale service, such providing spared parts.
 

FAQ

Q: Are you a manufacturer of spiral chute?

A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi.
 

Q: What is the warranty of spiral chute?

A: 1 year.

 

Q: will you help to install spiral chute machinery?

A: If you need, we will have our technicians to assist you for installation. 

 

Q:Could your company provide customized products?

A: Yes. OEM is welcome.

Contact

Introduction of magnetic separator

 Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute.

The efficiency of the separator depends upon the strength of the magnet and the speed of the conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.

The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.

Classification of magnetic separator

Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system

Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials.

Discharging Type of magnetic separator

Manual Discharge Type (without motor and belt)

Self-Discharging Type (with motor and belt)

Cooling Type: (just for electromagnetic type)
--Air Cooling 
--Oil Cooling
--Fan Cooling

Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.

Features of magnetic separation equipment

1. Excellent magnetic field intensity, Used to remove iron particles from material
2. The wholly sealed structure makes the remover water-proof, dust-proof and corrosion resisting.
3. Low energy consumption.

Application of belt electromagnetic separation

widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.

Components of magnetic separator

Permanent magnetic plate, Belt , Motor, Iron frame.

Sketch installation drawing of magnetic separator

Model Selection

1. Before choosing, you should pay attention to whether to convey the tape, bandwidth, inclination, material properties, humidity, and thickness, the amount of iron in the material, the nature of the ferromagnetic material, the requirements of iron removal and the environment used, etc. a kind
2.When there is more iron, you should choose RCDC, RCDD, RCDF series;
3.When the iron content is small, you should choose RCDA, RCDB, RCDE series;
4. When using suspended electric and permanent magnet iron remover, if the material is very thick, it can be used with the WCTG series of five parallel rollers, which can improve the iron removal rate and achieve the ideal iron removal effect;
5.When the material contained in the material cannot be adsorbed by the iron remover, the metal detector should be used to detect the metal, and the automatic iron removal should be performed after the automatic shutdown.

Technical Data of  magnetic separator

Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant


 

Our Services

1. One year guarantee.

2. Sample testing.

3. our technician can design your project based on your information such as flow chart.

4. Engineer available for over seas installation and training.

5. after sale service, such providing spared parts.
 

FAQ

Q: Are you a manufacturer of spiral chute?

A: Yes, we are manufacturer of spiral chute and have our own factory, located in Shicheng, Ganzhou, Jiangxi.
 

Q: What is the warranty of spiral chute?

A: 1 year.

 

Q: will you help to install spiral chute machinery?

A: If you need, we will have our technicians to assist you for installation. 

 

Q:Could your company provide customized products?

A: Yes. OEM is welcome.

Contact

Coarse Needle Dyed Cloth

Dyeing Fabric,Needle For Knits,Custom Dyed Fabric,Coarse Needle Dyed Cloth

SHAOXING BAOYING TEXTILE CO.,LTD , https://www.baoyingfabric.com