Model NO.: CT
Trademark: changgan
Transport Package: Wood Case
Specification: CE
Origin: China
HS Code: 8419399090
Application
Vacuum dryer is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature. It is wide used in pharmaceutical, chemical, foodstuff and electronic industries.
Principle of work
It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying. If use vacuum to take air and humidity out, the dry speed will be faster.
Note: If use condensator, the solvent in raw material can be recovered. If use SK series water ring vacuum pump or ZSWJ series hydraulic inject vacuum pump sets, condensator can not be used and the investment could be saved.
Features
Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved;
The heat source for operation of evaporation may be Iow pressure steam or surplus heat steam;
The heat loss of evaporator is less;
Before drying, the treatment of disinfection may be.
| Name\specification | YZG-600 Φ×L | YZG-800 Φ×L | YZG-1000 Φ×L | YZG-1400 Φ×L | FZG-15 L×W×H |
| inside size of chamber (mm) | 600×976 | 800×1274 | 1000×1527 | 1400×2054 | 1500×1400×1200 |
| size of chamber (mm) | 1153×810×1020 | 1700×1040×1335 | 1693×1190×1500 | 2386×1657×1920 | 1513×1924×2060 |
| layers of baking shelf | 4 | 4 | 6 | 8 | 8 |
| layer of baking shelf (mm) | 81 | 82 | 102 | 102 | 122 |
| size of baking shelf (mm) | 310×600×45 | 460×600×45 | 460×640×45 | 460×640×45 | 460×640×45 |
| number of baking disk | 4 | 8 | 12 | 32 | 32 |
| permitted pressure inside the pipe of baking shell(Mpa) | ≤0.784(8kgf/cm 2 ) | ≤0.784 | ≤0.784 | ≤0.784 | ≤0.784 |
| temperature inside chamber() | ≤150 | ≤150 | ≤150 | ≤150 | ≤150 |
| vacuum in idle inside chamber | ≤30 | ||||
| when vacuum is 30 torr and the heating temperature is 1100C,vaporized rate of water(kg/m 2. h) | 7.2 | ||||
| if use condensator,type and power of vacuum pump(kw) Â | 2X-15A 2kW | 2X-30A 3kW | W3 5.5kW | W3 7.5kW | 2X-70A 7.5kW |
| if not use condensator,type and power of vacuum pump(kw) | SK-0.8 2.2kW | SK-3 5.5kW | SK-3 5.5kW | SK-3 7.5kW | SK-3 7.5kW |
| weight of drying chamber(kg) | 250 | 600 | 800 | 1000 | 2100 |
Shirt Assisting And Auto-Sewing Equipment
Shirt Assisting And Auto-Sewing Equipment,Shirt Placket Cutting Machine,Shirt Front Placket Cutting Machine,Automatic French Cuff Blocking Machine
Ngai Shing Development Limited , https://www.ngaishinghk.com