At the Allianz Global Rescue (China) First National Automobile Rescue Technology Challenge Competition held in Beijing recently, Changzhou Zhongqi Commercial Vehicle Co., Ltd. has developed from the main R&D in recent years and has established a number of Changi brand Wreckers in China, earning Full of eyeballs and orders.
The unique products of Changzhou Zhongqi Commercial Vehicle Co., Ltd. include the domestic first pickup truck, with a head like a car, only 1.7 meters high, and free access to an underground garage with a height limit of 1.8 to 2 meters. Wreckers are unable to enter the underground garage for rescue because of their high altitude.
China's first double decker wrecker, one roof and two cars, suitable for new car transportation, can increase the profit by 70% compared with the ordinary flat car; take the lead in researching and developing lift force of 60 tons and 360° rotation in China The heavy-duty wreckers were exported to Japan, and the outer wagons of the wreckers that specially transport Bentley, Ferrari, and Porsche cars were changed from fixed to retractable models to facilitate the loading and unloading of tarpaulins.
Since Changzhou Zhongqi Commercial Vehicle Co., Ltd. developed the first Changqi Wrecker in 1995, it has grown to over 80 varieties and more than 100 kinds of specifications through more than 10 years of development. The domestic sales market has covered the Chinese mainland. All provinces and municipalities except Tibet, and exported to overseas markets such as Japan, Thailand, Vietnam, and Africa.
The company's sales in 2011 will grow by 20% year-on-year, and it is expected to reach 800 units. The sales volume for the third consecutive year will rank in the top 2 in the country and the research and development level will rank first in the country.
Metal Body Square Water Cooling Tower
This series of products run stable, low noise, energy-saving, in office buildings, shopping malls, hotels, residential areas and other central air-conditioning supporting the use of better results.
The company's standard cooling tower according to the international design conditions design, can also provide customers with non-standard operating conditions or specific sizes under the special, special design.
The circulating water pump suction port shall be located below the water level of the cooling tower catchment basin, and the cooling tower outlet pipe shall not be allowed to be higher than the maximum water level of the catchment basin.
Pipe mounts should be pipe racks and cooling towers should not be allowed to directly bear the weight of the pipes.
The rehydration pipe of the cooling tower should be provided with a support stand to avoid vibration of the pipe when the float valve is rehydrated.
Rehydration pressure should be below 5m water pressure, national standard
The flannage pressure is 1.0Mpa.
When two or more units are assembled, our company will provide a connecting balance tube to balance the chassis water level. The tower top inlet should be set with a conditioning valve in order to enter each
.The water level of the tower is uniform.
The noise is measured at dm1.13VL-W at the equivalent diameter of the cooling tower (Dm1.13VL*W), 1.5 meters above the ground height, wherein L and W are the shape rulers of the tower
inch long and wide).
The use of cellular continuous blister series of diversion,heat dissipation, water collection three-in-one native filler, the whole suspension, gravity cloth water, low drop of water, with cold effect
High, low energy consumption, less drift water, less noise and so on, floating water rate is less than 0.001%.
When connecting different types of towers, the bottom basin water level height of different types of towers must be taken into account, and the base height must be adjusted to maintain the water level balance of the towers.
Metal Body Square Water Cooling Tower,Tower Water Cooler,Water Cooled Cooling Tower,Tower Cooling System
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com