Model NO.: HD-F732
Control: Computer Control
Weight: 500-1000Kg
Power Source: AC220V
Usage: Chair Caster Test Machine
Design Standard: BIFMA X5.1
Design Criteria: BIFMA. X 5.1-2011, Section 8, 11.3, 11.4 and 23.
Power: 220 Volt AC, 1200W
Model: HD-410
Driving Mode: Variable Frequency Motor and Timing Belt
Stroke: 762mm (+ 50mm)
Rate: 8 ~ 12 Times / Min
Control Mode: PLC and LCD Display
Voltage: 220V Single-Phase, 900W
Trademark: Haida
Transport Package: Strong Wooden Case
Specification: BIFMA X5.1
Origin: Dongguan
HS Code: 9024
     Automatic Office Chair Caster Durability Test Equipment1) Impact Bag lift up by motor + electro-magnetic clutch, and released free drop on to the seat.
(note: Able to work for STATIC LOAD TEST, DYNAMIC TEST & LOAD & EASE TEST. )
2) Lift height is settable, counted by an encoder for precise height setting.
(from 100 mm to 1050 mm measure from the base of the impact bag
3) 1 set of diameter 16" (406 mm) impact bag with lead shot weighted 102 kg included.
4) Additional weight 34 kg provided.
5) 6 digits pre-set counter for test cycle setting.
6) Test speed adjustable from 1 to 30 cycles per minute
7) Power: 1Φ , 220 volt AC, 1200W
8) Design criteria: BIFMA. X 5.1-2011, section 8, 11.3, 11.4 and 23.
Â
driving mode | variable frequency motor and timing belt |
Stroke | 762mm (+ 50mm) |
rate | 8 ~ 12 times / min |
holder with the up and down adjustment range | 80mm~500mm |
control mode | PLC and LCD display |
Voltage | 220V single-phase, 900W |
Design standard | Bifma x 5.1 clause 17 |
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
Â
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Â
Auto Lighting System,Tail Lamp In Car,Rear Bumper With Lights,Car Back Tail
Changzhou Saina Automobile Industry Co., Ltd , https://www.sainaauto.com